GATE 2019 IN – Previous Year Questions with Solutions
All 65 questions of GATE 2019 IN with answers and explanations. Read each question, then practise it by topic or as a full paper.
65 questions worth 100 marks in all (30 1-mark, 35 2-mark). Subjects covered: General Aptitude (10), Engineering Mathematics (8), Electrical Circuits and Machines (7), Digital Electronics (7), Signals and Systems (6), Control Systems (6), Analog Electronics (6), Communication and Optical Instrumentation (6).
Practise this paper in The GATE Grind →
- Question 1 – The fishermen, the flood victims owed their lives, were rewarded by the government.
- Question 2 – Some students were not involved in the strike. If this is true, which conclusions are logically necessary? 1. Some who were involved in the strike…
- Question 3 – The radius and height of a circular cone each increase by 10%. What is the percentage increase in its volume?
- Question 4 – Arrange 10, 7, 5, 4 and 2 from left to right such that no two odd/even numbers are adjacent, the second number is half the left-most number, and the…
- Question 5 – Until Iran came along, India had never been in kabaddi.
- Question 6 – After a 125-basis-point repo-rate reduction, banks demanded a reduction in small-savings interest rates. The government then announced such a…
- Question 7 – In a country with a population of 1400 million, 70% own mobile phones; 294 million owners use the Internet, and half of those buy goods online. What…
- Question 8 – Hindustani music terms changed over time: dhrupad styles were called baanis; gayaki and baaj referred to vocal and instrumental styles; gharana…
- Question 9 – Two trains leave the same point at 7 AM, traveling in opposite directions at 80 km/h north and 100 km/h south. At what time are they 540 km apart?
- Question 10 – A paragraph compares a kingdom’s prestige, based on taxes levied, with a head-hunter’s prestige. According to the paragraph, a head-hunter’s prestige…
- Question 11 – Vectors a, b and c are mutually orthogonal. Given a = i + 2j + 5k and b = i + 2j - k, the vector c is parallel to
- Question 12 – The vector field A is the gradient of a scalar function u(x,y), A = grad u. What is the magnitude of curl A?
- Question 13 – A box has 8 red and 8 green balls. Two balls are drawn successively without replacement. What is the probability that the first is red and the second…
- Question 14 – Two identical ideal transformers are shown in figures (a) and (b), except the secondary in (b) is centre-tapped. With ideal diodes, what is the ratio…
- Question 15 – A system has y(t) = integral from 0 to t of x(tau-2) d tau, with x(t)=y(t)=0 for t<=0. What is its transfer function?
- Question 16 – A discrete-time system satisfies y[n] = alpha y[n-1] + x[n]. What condition on alpha makes it BIBO stable?
- Question 17 – In a cascade control system, the inner and outer closed-loop transfer functions have single time constants tau1 and tau2. What relationship is desired…
- Question 18 – For unity feedback, L(s)=k/[(s+1)(s+2)(s+3)], k>0. If gain crossover frequency is less than phase crossover frequency, the closed-loop system is
- Question 19 – If inductance, capacitance, and resistance of a series LCR circuit are each doubled, how does its Q-factor change?
- Question 20 – In the shown op-amp circuit, Vin is positive and the diode follows I=I0 exp(V/VT) under forward bias. With an ideal op-amp, Vout is proportional to
- Question 21 – The correct biasing conditions for typical operation of LEDs, photodiodes, and Zener diodes, respectively, are
- Question 22 – Ideal positive-edge-triggered synchronous J-K flip-flops with outputs X and Y are connected as shown. Initially X=0 and Y=0 before the first clock…
- Question 23 – Thermocouples measure temperature based on the
- Question 24 – Four strain gauges in a Wheatstone bridge are connected to an instrumentation amplifier as shown. What is the preferred CMRR value for the amplifier…
- Question 25 – In a single-mode optical fiber, the zero-dispersion wavelength is the wavelength at which
- Question 26 – A 3x3 matrix has eigenvalues 1, 2 and 5. Find its determinant.
- Question 27 – In the shown 5 V source circuit with a 5 ohm series resistor and load resistance RL, what RL gives maximum power transfer?
- Question 28 – A circuit contains only constant resistors and ideal independent DC voltage sources. If all resistances are divided by 10 and all source voltages are…
- Question 29 – A capacitor network has switch S1 initially open, capacitor C1 initially charged to 6 C and C2 initially uncharged. After closing S1, find the…
- Question 30 – An 8-bit weighted-resistor DAC has smallest resistance 500 ohms. Find the largest resistance in kOhms.
- Question 31 – How many Boolean functions with distinct truth tables can be defined over three Boolean variables?
- Question 32 – For the ith full-adder block shown, gates each have 2 ns delay and interconnect delay is zero. If Ai and Bi are stable, find the maximum delay from…
- Question 33 – Voltage measurements have mean 1 V and standard deviation 0.12 V; current measurements have mean 1 mA and standard deviation 0.05 mA. Assuming…
- Question 34 – A Pitot-static tube measures pressure difference 200 N/m2 in an incompressible fluid of density 1 kg/m3. With coefficient 1.0, find the fluid velocity…
- Question 35 – A carrier cos(2pi f c t) is double-sideband-with-carrier modulated by cos(2pi f m t), giving cos(2pi f c t)+0.3 cos(2pi f m t)cos(2pi f c t). Find the…
- Question 36 – The curve y=f(x) has a tangent at every point (x,y) whose y-axis intercept c is c=-y. Then f(x) is proportional to
- Question 37 – p(x)=A/xmu for x>=1 and p(x)=0 for x<1, where mu>1. For p(x) to be a probability density function, A equals
- Question 38 – A linear system has xdot = [[1,2],[-3,-4]]x + [20,10] and initial state x(0)=[0,0]. Its steady-state state vector is
- Question 39 – A function f(z) is analytic in the entire complex plane. Which of the following can be f(z)?
- Question 40 – The open-loop transfer function is G(s)=3/s and the compensator is C(s)=K/(s+p). The root locus passes through -3 +/- j3sqrt(3). The value of p is
- Question 41 – A unity-feedback system is subjected to disturbance d(t)=0.1 sin(omega t), omega=5 rad/s. At this frequency the open-loop Bode plot has magnitude 40…
- Question 42 – A unity-feedback system has r(t)=t2, PID controller C(s)=Kp+Ki/s+Kd*s and plant P(s)=3/s. For Kp=10, Ki=1 and Kd=2, the steady-state error is
- Question 43 – A four-MOSFET voltage amplifier operates in saturation with channel-length modulation ignored. Three n-channel devices have transconductance gmn and…
- Question 44 – Ideal zero-delay comparators receive Vin=6 sin(wt). In one period, the fraction of time that OUT is HIGH is
- Question 45 – X = X1X0 and Y = Y1Y0 are 2-bit binary numbers. The Boolean function S that is 1 when X>Y, in minimized form, is
- Question 46 – An LED/LDR circuit is shown. The LED is initially OFF. Switch S1 closes for 1 ms and is then opened. Which describes the LED state afterward?
- Question 47 – A differential capacitive sensor has 100 mm between its extreme plates. For a 10 mm downward displacement of its intermediate plate, the RMS…
- Question 48 – A piezoelectric transducer has sensitivity 30 mV/kPa over 0-100 kPa. Its readout has 0.3 mV peak noise and encodes the range with 10 bits. The…
- Question 49 – A 100 W isotropic light source is 1 m from a 2 cm diameter photodetector with responsivity 0.4 A/W. The generated photocurrent in mA is
- Question 50 – A resistance meter has ranges 200 ohm to 2 Mohm in decades and applies 2 V full-scale across the device. For a device in 8-12 kohm with 100 microwatt…
- Question 51 – A pulsed laser emits 1 ns rectangular pulses at 1 kHz with average power 1 mW. The average power during a pulse, in watts, is
- Question 52 – Four identical resistive strain gauges (gauge factor 2) form the shown Wheatstone bridge. Only the active gauge changes resistance. If Vout=1 mV, the…
- Question 53 – A digital filter has passband 0.95<= H <=1.05 for 0<=omega<=0.3pi and stopband H <0.005 for 0.4pi<=omega<=pi. If the analog upper passband cutoff is…
- Question 54 – A 5 V step is applied at node A at t=0 to the shown RC circuit. The capacitor is initially uncharged. Find the voltage at node P at t=6 microseconds,…
- Question 55 – In the shown series RLC circuit, find the angular frequency at which current and voltage are in phase.
- Question 56 – A system has G(s)=1/(s+3). A unit step is applied at t=0 and y(0)=3. Find y(1), rounded to two decimal places.
- Question 57 – The continuous-time system has y(t)=x(t)+(1/2)x(t-1). If the Fourier transforms are X(omega) and Y(omega), respectively, and X(0) 2=4, find Y(0) 2.
- Question 58 – A discrete-time signal x[n]=exp(j(5pi/3)n)+exp(j(pi/4)n) is down-sampled as xd[n]=x[4n]. Find the fundamental period of xd[n].
- Question 59 – A unity-feedback control system has loop gain L(s)=9 exp(-0.1s)/s. Find the phase margin in degrees.
- Question 60 – The shown circuit uses identical n-channel enhancement MOSFETs biased in saturation. Ignoring channel-length modulation, find Vout in volts.
- Question 61 – The shown circuit uses ideal op-amps. Find the resistance R, in kOhms, for which the current I is zero.
- Question 62 – The shown parallel resistance-capacitance bridge has standard capacitor C1=0.1 microfarad and R3=10 kOhm. It is balanced at 100 Hz for R1=375 kOhm,…
- Question 63 – A microprocessor has a 16-bit address bus; A15-A12 select a 4096-word memory and A0-A11 address words. If A0-A2 are shorted to ground, how many words…
- Question 64 – A signal of bandwidth 2B about 2 GHz is mixed with a 1.5 GHz local oscillator, passed through an ideal 2.8 GHz low-pass filter, then sampled at 1.6…
- Question 65 – In a Michelson interferometer, changing the laser wavelength from 400 nm to 500 nm changes output-port intensity from minimum to maximum. Find the…