GATE 2019 XE — all source sections – Previous Year Questions with Solutions
All 175 questions of GATE 2019 XE — all source sections with answers and explanations. Read each question, then practise it by topic or as a full paper.
175 questions worth 275 marks in all (75 1-mark, 100 2-mark). Subjects covered: Fluid Mechanics (XE1) (22), Materials Science (XE2) (22), Solid Mechanics (XE3) (22), Thermodynamics (XE4) (22), Polymer Science and Engineering (XE5) (22), Food Technology (XE6) (22), Atmospheric and Oceanic Sciences (XE7) (22), Engineering Mathematics (XE0) (11).
Practise this paper in The GATE Grind →
- Question 1 – Once the team of analysts identify the problem, we in a better position to comment on the issue. Which one of the following choices CANNOT fill the…
- Question 2 – A final examination is the of a series of evaluations that a student has to go through.
- Question 3 – If IMHO = JNIP; IDK = JEL; and SO = TP, then IDC = .
- Question 4 – The product of three integers X, Y and Z is 192. Z is equal to 4 and P is equal to the average of X and Y. What is the minimum possible value of P?
- Question 5 – Are there enough seats here? There are people here than I expected.
- Question 6 – Fiscal deficit was 4% of the GDP in 2015 and increased to 5% in 2016. If GDP increased by 10% from 2015 to 2016, the percentage increase in the actual…
- Question 7 – Two pipes P and Q can fill a tank in 6 hours and 9 hours respectively, while a third pipe R can empty the tank in 12 hours. Initially, P and R are…
- Question 8 – While teaching a creative writing class in India, I was surprised at receiving stories from the students that were all set in distant places: in the…
- Question 9 – Mola is a digital taxi platform offering Pool, Mini and Prime rides, earning one US dollar per ride. Counts for January, February, March and April…
- Question 10 – X is an online media provider. By offering unlimited and exclusive online content at attractive prices for a loyalty membership, X is almost forcing…
- Question 11 – Let X be a Poisson random variable with parameter =1. Then the probability P(2 X4) equals
- Question 12 – For the series n=1 rac(x+1)nn2n, where -<x<, which of the following statements is NOT correct?
- Question 13 – Let f(z)=arze- z 2, where arz is the complex conjugate of z. Then f is differentiable on
- Question 14 – If the transformation u(x,t)=exv(x,t) reduces the partial differential equation rac2u x2-2 rac u x- rac u t+u=9 to the equation rac v t- rac2v…
- Question 15 – The value of lpha for which the following system of equations has a solution is alignedx-y-3z&=3\\2x+z&=0\\-2y-7z&=aligned .
- Question 16 – The value of the line integral rac2 (-y3\,dx+x3\,dy), where is the circle x2+y2=1 oriented counterclockwise, is .
- Question 17 – Let y 1(x) and y 2(x) be two linearly independent solutions of x2d2ydx2+xdydx-4y=0, x>0. If y 1(x)=x2, then xy 2(x) is .
- Question 18 – If Q=pmatrix3&2&4\\2&0&2\\4&2&3pmatrix and P=(v 1\;v 2\;v 3) is the matrix whose columns are linearly independent eigenvectors of Q, then the sum of…
- Question 19 – P(x)=ax3+bx2+cx+d is the polynomial obtained by Lagrange interpolation satisfying P(0)=-8, P(1)=-7, P(2)=-6, and P(4)=20. The value of a-b+c is
- Question 20 – The number of critical points of f(x,y)=x3+3xy2-15x-12y at which there is neither a maximum nor a minimum is .
- Question 21 – Let I=105i2 dz(z-4)(z7-1), where i=-1 and is the circle z =2 oriented counterclockwise. The value of I, rounded to one decimal place, is .
- Question 22 – For stable equilibrium of a floating body, which one of the following statements is correct?
- Question 23 – If u and v are the velocity components in the x- and y-directions, respectively, the z-component of vorticity z at a point in a flow field is
- Question 24 – In which one of the following devices is the difference between static and total pressure used to determine the flow velocity?
- Question 25 – A golf ball is dimpled to make the flow turbulent and consequently reduce drag. Turbulent flow reduces the drag on the golf ball because
- Question 26 – For steady laminar incompressible boundary-layer flow over a sharp-edged flat plate at zero incidence,
- Question 27 – The power input P to a centrifugal pump is a function of volume flow rate Q, impeller diameter D, rotational speed , fluid density , dynamic viscosity…
- Question 28 – Consider two-dimensional laminar flow of water (=0.001\;N s/m2) between two infinitely long parallel plates 0.1 m apart, as shown in the figure. The…
- Question 29 – The maximum velocity in a fully developed laminar incompressible flow through a circular pipe of constant cross-sectional area is 6 m/s. The average…
- Question 30 – The theoretical discharge for flow through an orificemeter is 40 m3/s. If the measured discharge in an experiment is 32 m3/s, the discharge…
- Question 31 – Consider flow between two infinitely long parallel plates of large width separated by a distance 2H. The upper plate moves with constant velocity U…
- Question 32 – The velocity field in Cartesian coordinates in a two-dimensional steady incompressible flow of a fluid with density is V=xi-yj. Assuming no body or…
- Question 33 – A two-dimensional velocity field in Cartesian coordinates is defined by V=yi-xj. This flow is
- Question 34 – Assertion [a]: The streamlines in a free-vortex flow are concentric circles. Reason [r]: There exists only a radial component for the velocity field…
- Question 35 – The velocity components in Cartesian coordinates in a two-dimensional incompressible flow are u=ey(x) and v=ey(x). The magnitude of total acceleration…
- Question 36 – For steady laminar flow at zero incidence over a flat plate, the velocity component parallel to the plate in the boundary layer is u(y)=a+by+cy2,…
- Question 37 – A fluid of constant density 1 kg/m3 flows past a semi-cylindrical structure with freestream velocity 2 m/s, as shown in the figure. The difference in…
- Question 38 – The mercury manometer shown in the figure is connected to a water pipe at one end while the other end is open to the atmosphere. The water density is…
- Question 39 – Water (=1000 kg/m3, =0.001 N s/m2) flows through a smooth circular pipe of radius 0.05 m. If the flow Reynolds number is 1000, the pressure drop…
- Question 40 – A uniform flow of velocity 2 m/s in the x-direction approaches a line source placed on the x-axis 0.1 m from the origin. If the origin is the…
- Question 41 – In steady incompressible flow of a fluid past a smooth stationary sphere, the drag force F depends on flow velocity U, diameter D, dynamic viscosity ,…
- Question 42 – An incompressible fluid flows past a flat plate, as shown in the figure, with uniform inlet velocity profile u=U and parabolic exit velocity profile…
- Question 43 – A jet engine is tested on a thrust stand as shown in the figure. The axial intake air velocity is 100 m/s; axial exhaust gas velocity is 250 m/s;…
- Question 44 – On decreasing the objective aperture size in an optical microscope,
- Question 45 – Pilling-Bedworth ratios for oxides of some metals are given below. Based on the Pilling-Bedworth ratio alone, which metal will be most protected from…
- Question 46 – In NaCl, the substitution of a Na+ ion by a Ca2+ ion would most probably lead to
- Question 47 – Which one of the following is time-independent?
- Question 48 – Copper is diffused into aluminium at 400 C for 100 hours to obtain a certain concentration at a given depth. In another experiment at 500 C, the time…
- Question 49 – If carbon (C) in iron (Fe) is 6 percent by weight, its atomic percent is approximately . Given: atomic weights C = 12 and Fe = 56.
- Question 50 – GaAs has an advantage over silicon when used in integrated circuits at low power because it has
- Question 51 – The glass-transition temperature of a polymer can be determined by
- Question 52 – The maximum wavelength of radiation to which germanium (Ge) is opaque will be . Given: energy gap of Ge = 0.67 eV, Planck constant h=6.63 imes10-34 J…
- Question 53 – An alternating copolymer has number-averaged molecular weight 105 g mol-1 and degree of polymerization 2210. If one repeat unit is ethylene, the other…
- Question 54 – Match the sintering processes in Column I with the most suitable products in Column II. Column I: (P) Solid-state sintering; (Q) Liquid-phase…
- Question 55 – Which one of the following conditions will NOT favour separation of impurities in the zone-refining process?
- Question 56 – A monochromatic X-ray beam of wavelength 0.154 nm is incident on a cubic crystal having lattice parameter a=0.245 nm. The diffraction angle 2 heta for…
- Question 57 – Nickel corrodes at 298 K in a solution of 0.06 M nickel chloride having pH 4. Assuming complete dissociation of nickel chloride, the partial pressure…
- Question 58 – The potential energy U(r) of a pair of atoms separated by distance r in a solid is U(r)=- racAr3+ racBr7. The equilibrium distance between the atoms…
- Question 59 – The tensile true-stress–true-strain curve in the plastic region of an alloy is given by (MPa) = 600n. When true strain is 0.05, the true stress is 350…
- Question 60 – Box S has 2 white and 4 black balls, and box T has 5 white and 3 black balls. A ball is drawn at random from box S and put in box T. The probability…
- Question 61 – The zero-point energy of an electron in a box of width 0.2 nm is eV. Round off to 1 decimal place. Given: Planck constant h=6.63 imes10-34 J s,…
- Question 62 – The de Broglie wavelength of an electron accelerated across a 300 kV potential in an electron microscope is 10-12 m. Ignore relativistic effects.…
- Question 63 – A stress of 17 MPa is applied to a polymer serving as a fastener in a complex assembly. At constant strain, the stress drops to 16.6 MPa after 100…
- Question 64 – A piezoelectric material has a Young's modulus of 72 GPa. The stress required to change its polarization from 640 to 645 C m-2 is MPa. Round off to…
- Question 65 – An iron bar magnet having coercivity of 7000 A m-1 is to be demagnetized. The bar is placed fully inside a 0.25 m long solenoid with 150 turns of…
- Question 66 – For a pinned-pinned slender column of length L, uniform circular cross section, and second moment of area I, the critical buckling load is P cr. For a…
- Question 67 – Two rods P and Q of uniform circular cross section are made of the same material and carry identical uniaxial tensile loads. Rod P is twice as long as…
- Question 68 – The frame comprises members ABC, CD, and BEDF. The frame is fixed at A, and the connections between the three members are pins. Load P is applied at…
- Question 69 – When two spheres moving in a horizontal plane collide obliquely, which one of the following statements is always true?
- Question 70 – In a bending-moment diagram of a simply supported beam, a discontinuity in bending moment occurs
- Question 71 – For a solid circular shaft fixed at one end with a torque applied at the other end, which statement is true?
- Question 72 – Flexural stress occurs in a straight beam when it is subjected to
- Question 73 – The bending moment at a point in a beam changes sign. Which statement is always true?
- Question 74 – The plane-stress state at a point is x=5 MPa, y=-1 MPa, and xy=4 MPa. If one principal stress at the point is 7 MPa, the other non-zero principal…
- Question 75 – A massless rod of length L has a concentrated mass m attached at its midpoint. It is held at rest between smooth ground and a smooth wall, making an…
- Question 76 – A cantilever beam of constant cross section is subjected to a positive moment M and a positive axial force F as shown. The normal stress due to F is…
- Question 77 – A block of mass m=10 kg is held in place along an incline by force F applied through the pulley arrangement shown. The coefficient of static friction…
- Question 78 – The frame shown comprises members ABC, BE, BF, and DEF. It is pin-supported at A and D. Members BE and BF are pin-connected to ABC and DEF. The…
- Question 79 – A simply supported beam is subjected to a concentrated force P=48000 N at mid-span. Its flexural rigidity is EI=11106 N m2. The curvature between Q…
- Question 80 – The shear-force (V) diagram for a cantilever beam with loads applied at points B and C is shown. The magnitudes of the applied forces at B (F B) and C…
- Question 81 – A 1 m long bar with uniform cross-sectional area 1000 mm2 is fixed at one end and subjected to a uniaxial tensile load of 200 kN at the other end. It…
- Question 82 – A solid rod with uniform circular cross section, length 1000 mm and diameter 100 mm, is subjected to uniaxial tension. Its length increases by 1 mm…
- Question 83 – A spherical pressure vessel has inner diameter 4 m and wall thickness 10 mm. It is made of steel with tensile yield strength 200 MPa. Neglecting…
- Question 84 – Two solid shafts P and Q of the same material transmit equal torque. Shaft P has uniform circular cross-sectional area A and shaft Q has area 4A. If…
- Question 85 – Slotted arm AB rotates in a horizontal plane about A at constant angular speed =10 rad/s. Particle P is released from rest in the frictionless slot, 2…
- Question 86 – A uniform pendulum rod of mass 10 kg and length L=5 m is attached to a viscous damper with damping coefficient c. Use g=10 m s-2. The least value of c…
- Question 87 – A beam with constant solid rectangular cross section is subjected to pure bending. Longitudinal strain at point A is 3.010-5. If Young's modulus is…
- Question 88 – One kg of an ideal gas (molecular weight X) occupies volume V at temperature T and pressure P 1. Four kg of another ideal gas (molecular weight 2X) is…
- Question 89 – Which one of the following is an intensive thermodynamic property?
- Question 90 – A thermodynamic process is represented as a constant-pressure process on a P-V diagram and a constant-temperature process on a T-V diagram. Which…
- Question 91 – Addition of a reheat process to a simple Rankine cycle will always
- Question 92 – A Carnot cycle implemented using an ideal gas in a piston-cylinder system will have
- Question 93 – The degrees of freedom for a pure substance at its triple point is
- Question 94 – The differential of the Gibbs function g for a simple compressible system is dg=v\,dP-s\,dT. Using the appropriate Maxwell relation, the quantity -( s…
- Question 95 – A Carnot engine receives 2000 kJ of heat from a source at 1200 K and rejects 500 kJ of heat to a sink. The sink temperature (K) is .
- Question 96 – A closed vessel contains 0.1 m3 of saturated liquid and 0.9 m3 of saturated vapour. The specific volumes of the liquid and vapour phases are 0.000843…
- Question 97 – A gas obeys the van der Waals equation of state (P+av2)(v-b)=RT, where a and b are van der Waals constants. The compressibility factor Z=PvRT in the…
- Question 98 – Consider the thermodynamic relation ( c p P) T=-T(2v T2) P. For a certain gas, the isobaric thermal expansion coefficient is =1T, where T is measured…
- Question 99 – A piston-cylinder system initially has volume 0.1 m3 and contains an ideal gas with c v=0.74 kJ kg-1 K-1 and R=0.288 kJ kg-1 K-1 at 1.5 bar and 298 K.…
- Question 100 – A reversible cyclic device absorbs 400 kJ/s of heat from a reservoir at 265 K and rejects heat to another reservoir at 298 K. The magnitude of the…
- Question 101 – In a reversible process, an ideal gas (c p=1.04 kJ kg-1 K-1, R=0.297 kJ kg-1 K-1) at 293 K is compressed in a cylinder from 100 kPa to 500 kPa. During…
- Question 102 – The sublimation pressure of water vapour at 233 K is 13 Pa. Assume water vapour behaves as an ideal gas (R=0.46 kJ kg-1 K-1), and the latent heat of…
- Question 103 – In a heating and humidification process, dry air with relative humidity 10% at 10 C is mixed with superheated steam at temperature T. The resultant…
- Question 104 – In a vapour-compression system, a refrigerant leaves the evaporator and enters the compressor as saturated vapour at 0 C. The specific enthalpies of…
- Question 105 – Hot air, assumed to be an ideal gas (c p=1000 J kg-1 K-1, =1.4), enters a gas turbine at 10 bar and 1000 K and leaves at 5 bar. It then expands in a…
- Question 106 – The T-s diagram for a thermodynamic process is shown. The heat transferred (kJ/kg) during the reversible process 1-3 is .
- Question 107 – In a simple Rankine cycle, superheated steam enters a turbine at 100 bar and 500 C (h=3375.1 kJ/kg, s=6.5995 kJ kg-1 K-1) at 1000 kg/s and expands…
- Question 108 – A rigid, adiabatic container has two parts A and B separated by a piston. Initially, part A contains 1 kg of an ideal gas (c v=750 J kg-1 K-1, R=500 J…
- Question 109 – In a steady-flow process, superheated steam at 70 bar and 450 C (h=3288.3 kJ/kg, s=6.6353 kJ kg-1 K-1) is throttled to 30 bar in an insulated valve at…
- Question 110 – The functionality of allyl alcohol (CH 2=CH-CH 2OH) for condensation reaction with terephthalic acid is
- Question 111 – Which polymer can be synthesized by ring-opening polymerization?
- Question 112 – The weather-resistant polymer among the following is
- Question 113 – If sodium and naphthalene are used to initiate polymerization of styrene, the most likely polymerization mechanism is
- Question 114 – Hypalon is the trade name for
- Question 115 – The copolymer(s) among high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE) is/are
- Question 116 – The polymer that lacks the ability to exhibit tacticity is
- Question 117 – The correct order of glass-transition temperature (T g) for the polymers below is: PC = polycarbonate; PET = poly(ethylene terephthalate); PE =…
- Question 118 – A polystyrene coffee cup can be most economically manufactured by
- Question 119 – Match the rubber additives with their functions. Additives: (P) Tetramethyl thiuram disulfide; (Q) Xylyl mercaptan; (R) Sulfur; (S) Microcrystalline…
- Question 120 – Match the polymers with their characteristic infrared (IR) stretching frequency. Polymers: (P) Polystyrene; (Q) Polyacrylonitrile; (R) Poly(ethylene…
- Question 121 – Match the products with the most suitable polymer for their manufacture. Products: (P) Electrical cables; (Q) Electrical switches; (R) Optical lenses;…
- Question 122 – The order of limiting oxygen index for the following polymers is: polypropylene (PP), polytetrafluoroethylene (PTFE), and poly(vinyl chloride) (PVC).
- Question 123 – Match the plastic additives with their functions. Additives: (P) Molybdenum disulfide; (Q) Glycerol monostearate; (R) Tribasic lead sulphate; (S)…
- Question 124 – Match the material classifications in Column A with the appropriate examples in Column B. Abbreviations: PS = polystyrene; PPO = polyphenylene oxide;…
- Question 125 – A linear amorphous polymer has T g=+10 C. At 28 C, its melt viscosity is 4108 poise. The viscosity of the polymer at its T g is 1013 poise. Round off…
- Question 126 – A polypropylene bar with a 10 mm 10 mm square cross section is 225 mm long. Its modulus is 861 MN m-2. It is pinned at both ends and an axial…
- Question 127 – In a unidirectional carbon-fibre/vinyl-ester composite, the ratio of the moduli of carbon fibre to vinyl ester is 35 and the fibres occupy 50% of the…
- Question 128 – A 3 mm thick layer of softened poly(methyl methacrylate) at 190 C is sandwiched between two flat parallel plates. A shear stress of 100 kPa is…
- Question 129 – For AIBN-initiated polymerization of styrene, if both the monomer and initiator concentrations are doubled, the rate of polymerization increases by a…
- Question 130 – If 49 moles of hexamethylene diamine are reacted with 50 moles of adipic acid to prepare Nylon 66, the number-average molecular weight (M n) of the…
- Question 131 – A single-screw extruder is used to manufacture a nylon rod of 0.5 cm diameter at a production rate of 2.5 cm s-1. The densities of solid nylon and…
- Question 132 – Colloidal stability of milk casein is due to the highly hydrated carbohydrate residues in
- Question 133 – Rice bran is stabilized prior to oil extraction to protect it from the activity of
- Question 134 – Sticking of powder to the wall of the chamber during spray drying of fruit juice is due to
- Question 135 – Thearubigins and theaflavins in black tea are formed by oxidation and dimerization of
- Question 136 – The ratio of Schmidt number to Lewis number is
- Question 137 – “Red dog” is one of the by-products during milling of
- Question 138 – An ice-cream mix of 870 g L-1 is used to prepare ice cream, yielding a finished product of 490 g L-1. The percent overrun is . Round off to 1 decimal…
- Question 139 – An impeller in a fruit-juice mixing tank rotates at 200 rpm with Reynolds number greater than 104. Juice density is 1045 kg m-3. If the impeller…
- Question 140 – Paddy consisting of 20% husk is milled, removing 6% bran during polishing. Assuming no other losses, the yield (percent) of polished rice from paddy…
- Question 141 – Match the laws in Column I with the corresponding phenomenon in Column II. Column I: (P) Newton’s law; (Q) Hertz’s constant-stress theory; (R) Fick’s…
- Question 142 – Match the mold in Column I with its asexual/sexual spore in Column II. Column I: (P) Aspergillus; (Q) Geotrichum; (R) Rhizopus; (S) Oomycetes. Column…
- Question 143 – Match the foods in Column I with their specific usage in Column II. Column I: (P) Egg yolk; (Q) Pregelatinised starch; (R) Gum; (S) Starch. Column II:…
- Question 144 – Match the bioactive compounds in Column I with their botanical source in Column II. Column I: (P) Isoflavones; (Q) Resistant starch; (R) Xanthophyll;…
- Question 145 – Match the microbial species in Column I with the related disease caused by them in Column II. Column I: (P) Vibrio sp.; (Q) Shigella sp.; (R) E. coli;…
- Question 146 – Buffalo milk of density 1030 kg m-3 is homogenized at a pressure of 30 MPa. Given g=9.81 m s-2 and assuming no pressure loss, the velocity (m s-1) of…
- Question 147 – Potato slices are dehydrated from an initial solid content of 12% to a final solid content of 94%. If peeling and other losses are 10% of the initial…
- Question 148 – A mixed-fruit beverage of 12 Brix with specific heat 4298 J kg-1 K-1 is heated from 30 C to 95 C for pasteurization at 1000 L h-1 in a tubular heat…
- Question 149 – Fruit juice is cooled in a tubular heat exchanger from 50 C to 7 C using water at 2 C, which is heated to 5 C. Assume Pr=0.72, Re=20000, thermal…
- Question 150 – Room air is at 40 C with 60% relative humidity. The saturated vapour pressure of water at 40 C is 7.375 kPa. The volume of humid air (m3 per kg of dry…
- Question 151 – A shallow-bed horizontal-belt solvent extractor operates on 0.3 mm-thick soybean flakes with a 0.5 m bed depth and forward speed 0.8 m min-1, with…
- Question 152 – An extruded snack food is packed in a barrier film with water-vapour transmission rate 0.02 mL m-2 day-1. Pack surface area is 0.0012 m2 per gram of…
- Question 153 – A 100 mm spherical meat ball with 60% moisture at 35 C is frozen in an air-blast freezer maintained at -45 C. Given latent heat of fusion of water…
- Question 154 – The Madden-Julian Oscillation (MJO) propagates
- Question 155 – The potential temperature of the atmosphere increases with height. An air parcel of dry air, if displaced vertically under adiabatic conditions, will…
- Question 156 – Oceanic oxygen minimum zones are formed in ocean layers where
- Question 157 – The tidal period in an estuary is 12 hours. The maximum ebb-current speed occurs
- Question 158 – The most abundant ions in seawater are
- Question 159 – Which one of the following statements about the axis of the Indian monsoon trough is true?
- Question 160 – Trade-wind inversions are associated with which combination of zonal and meridional wind components? P: Zonal westerly; Q: Zonal easterly; R:…
- Question 161 – Which statement about thermal wind is NOT correct?
- Question 162 – In a sigma-coordinate system, the surface pressure is 1000 hPa and the top pressure is 500 hPa. The pressure at sigma = 0.5 is
- Question 163 – The vapour pressure over a small water droplet, compared with that over a flat water surface, is
- Question 164 – For a horizontal velocity field u=-5x, v=4y, and w=0, where x and y point eastward and northward, respectively, which statement at 45N is NOT true?
- Question 165 – The distance between Mars and Earth is 0.52 times the distance between Earth and the Sun. If the solar constant at Earth is 1370 W m-2, the solar…
- Question 166 – For dry air, p= ho d R d T. The carbon-dioxide concentration in air increases fourfold from its present value of 500 mg kg-1. Given the universal gas…
- Question 167 – On a clear, calm evening, the lowest 20 m of the atmosphere continuously loses radiative energy at 10 W m-2, with no sensible or latent heat flux. At…
- Question 168 – A general circulation model uses 256 spherical-harmonic waves in the east-west direction. Two grid points are used to resolve the shortest wave. The…
- Question 169 – Rainfall of 10 cm day-1 falls on an ocean mixed layer of depth 5 m, initially having salinity 30 g kg-1. Assuming the rain mixes uniformly into the…
- Question 170 – A moist air parcel is lifted adiabatically to 800 hPa. Its initial temperature and pressure are 300 K and 1010 hPa, and the partial pressure of water…
- Question 171 – At steady state, global mean precipitation P equals global mean evaporation E from the Earth’s surface. If P=2.8 mm day-1, the global mean surface…
- Question 172 – A seawater column extending from the surface to 1000 m depth is initially at rest at the equator. The column is moved to 30N without changing its…
- Question 173 – Consider two north-south (meridional) sections A and B in the ocean, separated by 100 km; section B is east of section A (see figure). The steady…
- Question 174 – A tsunami is a long gravity wave, with wavelength much larger than ocean depth. It moves from point A to point B (see figure); water depth is 2000 m…
- Question 175 – At mid-latitudes, long Rossby waves obey the dispersion relation =- k/L2, where is frequency, k is zonal wavenumber, is the rate of change of the…