GATE 2018 CH – Previous Year Questions with Solutions
All 65 questions of GATE 2018 CH with answers and explanations. Read each question, then practise it by topic or as a full paper.
65 questions worth 100 marks in all (30 1-mark, 35 2-mark). Subjects covered: Engineering Mathematics (20), General Aptitude (10), Chemical Reaction Engineering (10), Fluid Mechanics and Mechanical Operations (7), Heat Transfer (6), Mass Transfer (5), Instrumentation and Process Control (3), Chemical Technology (1).
Practise this paper in The GATE Grind →
- Question 1 – Consider the following two equations: 0 0 dx x y dt dy x dt + + = − = The above set of equations is represented by
- Question 1 – “When she fell down the , she received many but little help.” The words that best fill the blanks in the above sentence are
- Question 2 – “In spite of being warned repeatedly, he failed to correct his behaviour.” The word that best fills the blank in the above sentence is
- Question 2 – The fourth order Runge-Kutta (RK4) method to solve an ordinary differential equation ( , ) dy f x y dx = is given as ( ) ( ) 1 2 3 4 1 1 2 2 3 4 3 1 (…
- Question 3 – A watch uses two electronic circuits (ECs). Each EC has a failure probability of 0.1 in one year of operation. Both ECs are required for functioning…
- Question 3 – For 0 ≤𝑥≤2𝜋, sin 𝑥 and cos 𝑥 are both decreasing functions in the interval .
- Question 4 – The area of an equilateral triangle is √3. What is the perimeter of the triangle?
- Question 4 – The figure which represents sin x y x = for x > 0 (x in radians) is
- Question 5 – Arrange the following three-dimensional objects in the descending order of their volumes: (i) A cuboid with dimensions 10 cm, 8 cm and 6 cm (ii) A…
- Question 5 – The terminal velocity of a spherical particle in gravitational settling under Stokes’ regime varies
- Question 6 – Critical speed of a ball mill depends on
- Question 6 – An automobile travels from city A to city B and returns to city A by the same route. The speed of the vehicle during the onward and return journeys…
- Question 7 – A set of 4 parallel lines intersect with another set of 5 parallel lines. How many parallelograms are formed?
- Question 7 – Economy of evaporators used for concentrating sugarcane juice is
- Question 8 – To pass a test, a candidate needs to answer at least 2 out of 3 questions correctly. A total of 6,30,000 candidates appeared for the test. Question A…
- Question 8 – Segmental baffles in a 2-4 shell and tube heat exchanger
- Question 9 – In connection with petroleum refining, identify the incorrect statement among the following options.
- Question 9 – If 𝑥2 + 𝑥−1 = 0 what is the value of 𝑥4 + 1 𝑥4?
- Question 10 – Polyvinyl chloride is produced by
- Question 10 – In a detailed study of annual crow births in India, it was found that there was relatively no growth during the period 2002 to 2004 and a sudden spike…
- Question 11 – The molecular formula of the predominant chemical compound in commercial sugar is
- Question 12 – Two packed towers are designed for the same mass velocity of the gas. The first has liquid and gas flow rates of 30 kg/s and 1.2 kg/s, respectively,…
- Question 13 – The Annual Fixed Charges (AFC) and Annual Utilities Costs (AUC) of a distillation column being designed are expressed in terms of the reflux ratio (R)…
- Question 14 – Consider the following properties: (P) temperature (Q) specific gravity (R) chemical potential (S) volume The option which lists ALL the intensive…
- Question 15 – Liquid phase isomerization of o-xylene to p-xylene using a zeolite catalyst was carried out in a CSTR. Three sets of kinetic data at different…
- Question 16 – Choose the correct statement In viscose rayon manufacturing process,
- Question 17 – The reactant (M) is converted into product (N) in the presence of catalyst in a fixed bed reactor. All the flow rates (F, G, H, P and R) in mol/s, and…
- Question 18 – A first-order process having a transfer function, 2 7 1 p G s = + is controlled by a proportional controller with gain of 3.2. The process time…
- Question 19 – According to the surface renewal theory, the unit of fractional rate of surface renewal is
- Question 20 – For absorption of H2S from a mixture with hydrocarbon vapour into an aqueous alkanolamine solution, the liquid phase mass transfer resistance is
- Question 21 – For a chemical reaction, the ratio of rate constant at 500 K to that at 400 K is 2.5. Given R = 8.314 J mol-1 K-1, the value of activation energy (in…
- Question 22 – Pitot tube is used to measure
- Question 23 – A venturi meter is installed to measure the flow rate of water in a 178 mm diameter (ID) pipe. The throat diameter is 102 mm. The differential…
- Question 24 – The ammonia (NH3) oxidation process occurs over a catalyst as 3 2 2 4 5 6 4 NH O H O NO + → + Air is supplied such that oxygen (O2) is 20% in excess…
- Question 25 – The initial water level in a tank is 4 m. When the valve located at the bottom is opened, the rate of change of water level (L) with respect to time…
- Question 26 – Match the equipment in Column A with the corresponding process in Column B Column A Column B (P) Centrifugal sifter (I) Mixing (Q) Bowl mill (II)…
- Question 27 – In the year 2005, the cost of a shell and tube heat exchanger with 68 m2 heat transfer area was Rs. 12.6 Lakh. Chemical Engineering Index for cost in…
- Question 28 – A furnace installed at a cost of Rs. 24 Lakh is expected to serve its useful life of 5 years. Salvage value of the furnace is Rs. 8 Lakh. The interest…
- Question 29 – G denotes the Gibbs free energy of a binary mixture, nT denotes the total number of moles present in the system, iμ is the chemical potential of the…
- Question 30 – A person is drowning in sea at location R and the lifeguard is standing at location P. The beach boundary is straight and horizontal, as shown in the…
- Question 31 – The decay ratio for a system having complex conjugate poles as 1 2 10 15 j ⎡ ⎤ − + ⎢ ⎥ ⎣ ⎦ and 1 2 10 15 j ⎡ ⎤ − − ⎢ ⎥ ⎣ ⎦ is
- Question 32 – Match the items in Column A with the items in Column B Column A Column B (P) Pure dead-time (Q) Pure capacitive (R) Inverse response (S) First-order…
- Question 33 – In a laboratory batch setup, reaction of P over a catalyst was studied at various temperatures. The reactions occurring are 2 ; P Q P R → → At the end…
- Question 34 – An insulated storage tank contains 1000 kg liquid of specific heat 10 kJ kg-1 K-1. The liquid is heated by saturated steam, condensing in a helical…
- Question 35 – The wall of a pipe of radius 1 m is at a uniform temperature of 200 oC, and is covered by insulation of thickness 0.1 m. The ambient air outside the…
- Question 36 – Vapour bubbles are formed in the nucleate boiling regime at a frequency of 10 bubbles per second per nucleation site. There are 100 nucleation sites…
- Question 37 – Under isothermal condition, a vertical tube of length L = 100 m contains a gas of molecular weight equal to 60. The pressure and temperature at the…
- Question 38 – At a shear rate of 10 s-1, the apparent viscosity of a non-Newtonian liquid was found to be 1 Pa s. At a shear rate of 100 s-1, the apparent viscosity…
- Question 39 – A CSTR and a PFR of equal volume are connected in series as shown below to carry out a first-order, isothermal, liquid phase reaction A → P The rate…
- Question 40 – The elementary second-order liquid phase reaction A + B → C + D is carried out in an isothermal plug flow reactor of 2 m3 volume. The inlet volumetric…
- Question 41 – It is decided to extract A from a feed containing 20 mol% A and 80 mol% B in two ideal cross-current stages as shown below, using equal amount of pure…
- Question 42 – A binary distillation column is designed by McCabe-Thiele method to get a distillate mole fraction of 0.9. The enriching section operating line has an…
- Question 43 – A fiberboard sheet (1.5 m × 2.0 m × 15 mm) is being dried by suspending it horizontally in a current of hot, dry air. The edges are insulated so that…
- Question 44 – Consider the following transfer function: 2 3 ( ) (5 1) G s s = + where, the natural period of oscillation is in min. The amplitude ratio at a…
- Question 45 – For a closed-loop system, consider the following transfer functions: process Gp(s), controller Gc(s), measuring device Gm(s), and final control…
- Question 46 – If 2 x y e− = then the value of 1 lim x dy x dx →∞ is
- Question 47 – For the matrix cos sin sin cos A θ θ θ θ − ⎡ ⎤ =⎢ ⎥ ⎣ ⎦ if det stands for the determinant and T A is the transpose of A then the value of det( T A A)…
- Question 48 – An azeotropic mixture of ethanol and water is to be separated in a distillation column using benzene as an entrainer. At the column operating…
- Question 49 – The volume of liquid filled in a spherical storage tank of radius R is computed from height of liquid, h, in the outside tube (neglecting the volume…
- Question 50 – In a closed piston-cylinder system, methane was observed to obey the following equation of state ( ) P V nb nRT − = where b = 0.029 m3/mol. The…
- Question 51 – A set of standard stainless steel pipes, each of internal diameter 26.65 mm and 6000 mm length, is used to make a plug flow reactor by joining them in…
- Question 52 – Hydrogenation of benzene is to be carried out using Ni (density = 8910 kg/m3) as catalyst, cast in the form of non-porous hollow cylinders, as shown…
- Question 53 – The humidity of air at a dry-bulb temperature of 65 oC is 0.025 kg water/kg dry air. The latent heat of vaporization of water at 0 oC is 2500 kJ/kg.…
- Question 54 – In a roll crusher, rolls of diameter 1 m each are set in such a manner that minimum clearance between the crushing surfaces is 15 mm. If the angle of…
- Question 55 – A hot liquid is to be cooled in a 1-1 shell and tube heat exchanger from 80 oC to 50 oC. Cooling water enters the tube side at 30 oC, and exits at 45…