GATE 2018 XE — all source sections – Question 22
An orifice plate is used to measure flow rate of air (density = 1.23 kg/m3) in a duct of
250 mm diameter as shown in figure. The volume flow rate is 1 m3/s. Flow at sections 1
and 3 is uniform and section 2 is located at vena contracta. The diameter ratio, Dt/D1, is
0.66. The flow area at vena contracta, A2 = 0.65At, where At is area of the orifice. The
pressure difference between locations 2 and 3 in N/m2 is ____________.

Practise this question in The GATE Grind →
Show answer and explanation
Correct answer: 1200 to 1350
Explanation
We are sorry we couldn't write detailed soluition for this, we are working on it!, please consider asking your own AI, its just 2-3 clicks with very minimum effort