GATE Mineral Processing and Extractive Metallurgy: Mineral beneficiation – Previous Year Questions
9 GATE previous year questions on Mineral beneficiation (Mineral Processing and Extractive Metallurgy, Metallurgical Engineering) with answers and explanations, from every paper.
- GATE 2022 MT Q38 – Match mineral-processing operations with physical principles. Column I: P. Flotation Q. Jigging R. Tabling S. Comminution Column II: 1. Difference in…
- GATE 2022 MT Q58 – A sieve made of steel wire of diameter 53 µm has an aperture size of 74 µm. Its mesh number is (round off to the nearest integer).
- GATE 2023 MT Q17 – The most effective concentration step for sulfide ores is
- GATE 2023 MT Q39 – An elutriator separates particles by size in flowing air, as shown. Assuming spherical particles and turbulent airflow, the suspended-particle…
- GATE 2023 MT Q59 – Copper ore assaying 10 wt.% Cu is fed to a concentration plant at the rate of 100 tons/h. If the grades of concentrate and tailing are 30 wt.% Cu and…
- GATE 2024 MT Q17 – Wet high intensity magnetic separators (WHIMS) are used to concentrate
- GATE 2024 MT Q18 – Which one of the following reagents is NOT used in froth flotation process?
- GATE 2025 MT Q24 – Match the elements in Column I with their respective ores in Column II. Column I: P. Al Q. Fe R. Ti S. Cu Column II: 1. Rutile 2. Hematite 3.…
- GATE 2025 MT Q54 – Spherical galena particles have the same settling velocity in water as spherical quartz particles of diameter 25 μm. The galena diameter is μm…