The GATE Grind

GATE Fluid Mechanics (XE1): Internal Flows – Previous Year Questions

29 GATE previous year questions on Internal Flows (Fluid Mechanics (XE1), Engineering Sciences) with answers and explanations, from every paper.

29 questions worth 48 marks in all (10 1-mark, 19 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2020 XE — all source sections Q25 (1 mark, Multiple choice) – A laminar hydrodynamic boundary layer over a smooth flat plate is shown in the figure. The wall shear stress is denoted by w. Which condition is…
  2. GATE 2020 XE — all source sections Q29 (1 mark, Numerical answer) – A liquid flows through a horizontal smooth pipe of diameter 5 cm and discharges into a collection tank measuring 50 cm × 50 cm × 50 cm. The time taken…
  3. GATE 2020 XE — all source sections Q33 (2 marks, Multiple choice) – An incompressible viscous fluid lies between two infinite horizontal parallel plates shown in the figure. The plates move in opposite directions with…
  4. GATE 2020 XE — all source sections Q37 (2 marks, Numerical answer) – Water flows at an average velocity of 10 m/s through a horizontal smooth tube of diameter 5 cm. The friction factor is 0.02. Head loss is obtained…
  5. GATE 2020 XE — all source sections Q39 (2 marks, Numerical answer) – A liquid of viscosity 1.7410-3 N·s/m2 flows through a horizontal capillary tube of diameter 0.5 mm. The flow is steady, incompressible and fully…
  6. GATE 2020 XE — all source sections Q43 (2 marks, Numerical answer) – An incompressible steady flow enters between parallel plates with uniform velocity and develops into a parabolic laminar profile u=ay(y 0-y) at the…
  7. GATE 2019 XE — all source sections Q24 (1 mark, Multiple choice) – In which one of the following devices is the difference between static and total pressure used to determine the flow velocity?
  8. GATE 2019 XE — all source sections Q28 (1 mark, Numerical answer) – Consider two-dimensional laminar flow of water (=0.001\;N s/m2) between two infinitely long parallel plates 0.1 m apart, as shown in the figure. The…
  9. GATE 2019 XE — all source sections Q29 (1 mark, Numerical answer) – The maximum velocity in a fully developed laminar incompressible flow through a circular pipe of constant cross-sectional area is 6 m/s. The average…
  10. GATE 2019 XE — all source sections Q30 (1 mark, Numerical answer) – The theoretical discharge for flow through an orificemeter is 40 m3/s. If the measured discharge in an experiment is 32 m3/s, the discharge…
  11. GATE 2019 XE — all source sections Q31 (2 marks, Multiple choice) – Consider flow between two infinitely long parallel plates of large width separated by a distance 2H. The upper plate moves with constant velocity U…
  12. GATE 2019 XE — all source sections Q39 (2 marks, Numerical answer) – Water (=1000 kg/m3, =0.001 N s/m2) flows through a smooth circular pipe of radius 0.05 m. If the flow Reynolds number is 1000, the pressure drop…
  13. GATE 2023 XE — all source sections Q31 (2 marks, Multiple choice) – Steady fully developed incompressible Newtonian flow lies between infinite plates at y = 0, H moving oppositely with speeds U2, U1. There is no…
  14. GATE 2023 XE — all source sections Q42 (2 marks, Numerical answer) – For axisymmetric tube flow,u(r)/U=(1-r/R)1/n, where U is centreline speed. Find area-average-speed ratio V/U for n = 1, to two decimals.
  15. GATE 2024 XE — all source sections Q27 (1 mark, Multiple choice) – The hydraulic diameter for a circular pipe of radius 𝑅 is
  16. GATE 2024 XE — all source sections Q28 (1 mark, Multiple choice) – For incompressible, laminar, fully-developed flow through a circular pipe, Darcy friction factor and Fanning friction factor are represented as 𝑓 and…
  17. GATE 2024 XE — all source sections Q31 (2 marks, Multiple choice) – An incompressible Newtonian liquid of densityρ and viscosityµ forms a uniform falling film of thickness h on a vertical plate. Gravity alone drives…
  18. GATE 2024 XE — all source sections Q37 (2 marks, Numerical answer) – Consider two parallel plates separated by a distance of 1 cm filled with a Newtonian fluid of viscosity 10-3 Pa.s. The top plate is moving with a…
  19. GATE 2024 XE — all source sections Q40 (2 marks, Numerical answer) – Fully developed laminar pipe flow has u z=-R24 p z(1-r2/R2). If u z=1K(-R2 p z), find integer K.
  20. GATE 2025 XE — all source sections Q29 (1 mark, Multiple choice) – Consider the steady, incompressible, and fully developed laminar flow of a fluid through a circular pipe. Here, ∆𝑃 is the pressure drop in the…
  21. GATE 2025 XE — all source sections Q31 (2 marks, Multiple choice) – Two immiscible liquids flow steadily between stationary plates x = − b and x = b, in the z direction. Fluid I occupies − b<x<0 and fluid II0<x<b, with…
  22. GATE 2025 XE — all source sections Q35 (2 marks, Multiple choice) – The horizontal network carries steady incompressible flow1→4 through sections P, Q, R, S as shown. d, V, h denote each section’s diameter, speed and…
  23. GATE 2025 XE — all source sections Q37 (2 marks, Numerical answer) – Driven by a pressure gradient of 100 kPa/m, a fluid of dynamic viscosity 0.1 Pa.s flows between two fixed infinitely large parallel plates under…
  24. GATE 2025 XE — all source sections Q43 (2 marks, Numerical answer) – An oil of density 870 kg/m3 and viscosity 0.036 Pa.s flows through a straight pipe of 10 cm diameter and 1.5 km length at the flow rate of 250 liters…
  25. GATE 2026 XE — all source sections Q22 (1 mark, Multiple choice) – For laminar, incompressible, fully developed flow in a circular pipe, find maximum velocity divided by cross-sectional average velocity.
  26. GATE 2026 XE — all source sections Q31 (2 marks, Multiple choice) – Fully developed pressure-driven flow between plates at y=±h has u(y)=K(1-y2/h2), where K=(-dp/dx)h2/(2). At which y is local speed equal to its…
  27. GATE 2026 XE — all source sections Q33 (2 marks, Multiple choice) – Water flows in a smooth0.50 m diameter pipe with mass rates (i)0.25 kg/s and (ii)0.8 kg/s. Density is 1000 kg/m³ and μ=10⁻³ Pa·s. Which classification…
  28. GATE 2026 XE — all source sections Q42 (2 marks, Numerical answer) – Pipe flow has v z=(1/4)(dp/dz)(r2-R2). If wall-shear magnitude is (R/K) dp/dz , find integer K.
  29. GATE 2026 XE — all source sections Q43 (2 marks, Numerical answer) – Air flows at mean 3 m/s in a circular pipe with Darcy factor0.02. With g=10 m/s² and head loss per metre0.05, find diameter in metres, to two…