GATE Fluid Mechanics (XE1): External Flows – Previous Year Questions
18 GATE previous year questions on External Flows (Fluid Mechanics (XE1), Engineering Sciences) with answers and explanations, from every paper.
18 questions worth 28 marks in all (8 1-mark, 10 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2019 XE — all source sections Q25 – A golf ball is dimpled to make the flow turbulent and consequently reduce drag. Turbulent flow reduces the drag on the golf ball because
- GATE 2019 XE — all source sections Q26 – For steady laminar incompressible boundary-layer flow over a sharp-edged flat plate at zero incidence,
- GATE 2019 XE — all source sections Q36 – For steady laminar flow at zero incidence over a flat plate, the velocity component parallel to the plate in the boundary layer is u(y)=a+by+cy2,…
- GATE 2019 XE — all source sections Q37 – A fluid of constant density 1 kg/m3 flows past a semi-cylindrical structure with freestream velocity 2 m/s, as shown in the figure. The difference in…
- GATE 2023 XE — all source sections Q24 – For an incompressible flat-plate boundary layer with streamwise speed u and freestream U∞, which expression is momentum thickness?
- GATE 2023 XE — all source sections Q26 – Consider steady incompressible flow over a flat plate, where the dashed line represents the edge of the boundary layer, as shown in the figure. Which…
- GATE 2023 XE — all source sections Q34 – In steady incompressible Newtonian laminar flow over a horizontal flat plate with uniform freestream, how does boundary-layer thickness scale with x?
- GATE 2023 XE — all source sections Q41 – A thin plate of length0.25 m, width2 m has water flowing parallel over both faces at U∞ = 1 m/s. Useρ = 1000 kg/m³, µ = 0.001 Pa s, linear profile…
- GATE 2024 XE — all source sections Q25 – For the laminar, incompressible flow over a flat plate with uniform free stream velocity, the axial pressure gradient within the boundary layer is
- GATE 2024 XE — all source sections Q34 – Consider a fluid flow around an airfoil as shown in figure. The directions of drag force and lift force, respectively are along
- GATE 2024 XE — all source sections Q43 – Flat-plate flow has U∞ = 1 m/s, ν = 10⁻⁶ m²/s, ρ = 1 kg/m³ and profile u=U [3y/(2)-y2/(22)], with =4.64x/Re x. Find wall shear at x = 1 m as a…
- GATE 2025 XE — all source sections Q23 – A sharp flat plate of length L and infinite width is immersed parallel to a fluid stream having velocity 𝑢∞. At a point on the plate, far away from…
- GATE 2025 XE — all source sections Q32 – Match the depicted symmetric two-dimensional bodies P–S at Re≥10⁴ with frontal-area drag coefficients1 = 1.2,2 = 1.6,3 = 2.1,4 = 2.3, according to…
- GATE 2025 XE — all source sections Q39 – Consider, a kite weighing 100 grams as essentially a rigid flat plate making an angle 8° with the horizontal and having a planform area of 0.045 m2…
- GATE 2026 XE — all source sections Q23 – Air flows at speed U past the four pictured equal-frontal-area bodies. For Re≥10⁴, which has the least pressure/form drag?
- GATE 2026 XE — all source sections Q24 – For steady incompressible flow over a body of characteristic length L, which assumption about boundary-layer thickness δ underlies Prandtl’s…
- GATE 2026 XE — all source sections Q35 – At fixed distance x₁ and free-stream speed, laminar flat-plate boundary-layer thickness is δ₁ for kinematic viscosity ν₁. If ν₂=4ν₁, find δ₂.
- GATE 2026 XE — all source sections Q41 – For the supplied local friction coefficient C f=0.664/Re x, takeρ=1.2 kg/m³, ν=1.5×10⁻⁵ m²/s, U∞=3 m/s, x=0.05 m. Find local wall shear in N/m², to…