GATE Materials Science (XE2): Properties and Applications of Materials – Previous Year Questions
45 GATE previous year questions on Properties and Applications of Materials (Materials Science (XE2), Engineering Sciences) with answers and explanations, from every paper.
45 questions worth 71 marks in all (19 1-mark, 26 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q47 – The density of states D(E) in a three-dimensional solid varies with energy E as
- GATE 2020 XE — all source sections Q48 – The variation of molar volume (V m) of a liquid showing glass-transition temperature (T g) while cooling from its melting temperature (T m) is…
- GATE 2020 XE — all source sections Q50 – A ceramic has fracture toughness K Ic=1 MPa·m1/2. If the ceramic is exposed to a maximum stress =200 MPa, the maximum half-crack length a (in…
- GATE 2020 XE — all source sections Q51 – A ceramic material is periodically heated and cooled between 25°C and a higher temperature T f. During thermal cycling, the material remains…
- GATE 2020 XE — all source sections Q59 – Pure silicon has band gap E g=1.1 eV and is doped with 1 ppm phosphorus. Pure silicon contains 51028 atoms·m-3. At T=300 K, the shift in Fermi energy…
- GATE 2020 XE — all source sections Q60 – The figure shows light of intensity I 0 incident on a material of thickness x, absorption coefficient and reflectance R. The transmitted-light…
- GATE 2020 XE — all source sections Q61 – Fe 3O 4 (also represented as FeO·Fe 2O 3) is an FCC-structured inverse spinel (AB 2O 4). One-eighth of tetrahedral sites are occupied by half of the B…
- GATE 2020 XE — all source sections Q62 – A piezoelectric ceramic has piezoelectric coefficient d zz=10010-12 C·N-1 and is subjected to force F z=10 N applied normal to its x-y face, as shown…
- GATE 2019 XE — all source sections Q47 – Which one of the following is time-independent?
- GATE 2019 XE — all source sections Q50 – GaAs has an advantage over silicon when used in integrated circuits at low power because it has
- GATE 2019 XE — all source sections Q52 – The maximum wavelength of radiation to which germanium (Ge) is opaque will be . Given: energy gap of Ge = 0.67 eV, Planck constant h=6.63 imes10-34 J…
- GATE 2019 XE — all source sections Q59 – The tensile true-stress–true-strain curve in the plastic region of an alloy is given by (MPa) = 600n. When true strain is 0.05, the true stress is 350…
- GATE 2019 XE — all source sections Q61 – The zero-point energy of an electron in a box of width 0.2 nm is eV. Round off to 1 decimal place. Given: Planck constant h=6.63 imes10-34 J s,…
- GATE 2019 XE — all source sections Q62 – The de Broglie wavelength of an electron accelerated across a 300 kV potential in an electron microscope is 10-12 m. Ignore relativistic effects.…
- GATE 2019 XE — all source sections Q63 – A stress of 17 MPa is applied to a polymer serving as a fastener in a complex assembly. At constant strain, the stress drops to 16.6 MPa after 100…
- GATE 2019 XE — all source sections Q64 – A piezoelectric material has a Young's modulus of 72 GPa. The stress required to change its polarization from 640 to 645 C m-2 is MPa. Round off to…
- GATE 2019 XE — all source sections Q65 – An iron bar magnet having coercivity of 7000 A m-1 is to be demagnetized. The bar is placed fully inside a 0.25 m long solenoid with 150 turns of…
- GATE 2023 XE — all source sections Q45 – Which depicted magnetization M versus applied-field H hysteresis loop is most suitable for a permanent magnet?
- GATE 2023 XE — all source sections Q46 – A semiconductor has a band gap of approximately2 eV. Which absorption-versus-photon-energy graph is correct?
- GATE 2023 XE — all source sections Q50 – The tensile true stress (𝜎) – true strain (𝜖) curve follows the Hollomon equation: 𝜎 = 500𝜖0.15 MPa 𝑑𝜎 At the maximum load, the work-hardening…
- GATE 2023 XE — all source sections Q52 – A semiconductor has electron/hole mobility ratio10, electron density10¹⁵ m⁻³, hole density10¹⁶ m⁻³ and conductivity1.6 S/m. Using e = 1.6 × 10⁻¹⁹ C,…
- GATE 2023 XE — all source sections Q59 – For the shown Cv/T-versus-T² plot, which material/type statements are true?
- GATE 2023 XE — all source sections Q61 – The Young’s modulus of a quartz piezoelectric crystal is 100 GPa. The uniaxial stress required to change its polarization by 1% is (give absolute…
- GATE 2023 XE — all source sections Q62 – A1D nanowire has linear electron density10⁸ cm⁻¹. Find Fermi energy in eV, to two decimals, using 2/(2m)=0.24 (eV)² s² kg⁻¹. Use the spin-degenerate…
- GATE 2024 XE — all source sections Q45 – Mechanical behaviour of a crystalline ceramic material is best described as
- GATE 2024 XE — all source sections Q49 – Which of the following types of materials exhibit (s) positive magnetic susceptibility?
- GATE 2024 XE — all source sections Q54 – Which depicted density-of-states g(E) schematic represents a typical intrinsic semiconductor? E is carrier energy.
- GATE 2024 XE — all source sections Q56 – Which E-versus-occupancy f(E) curve best represents the hot end of a metal rod in the Seebeck-effect setting? EF is Fermi energy.
- GATE 2024 XE — all source sections Q57 – In a typical light emitting diode (LED), which of the following type (s) of materials is/are used?
- GATE 2024 XE — all source sections Q62 – Aluminium has room-temperature conductivity3.8 × 10⁷(Ω m)⁻¹ and electron mobility0.0012 m²/(V s). Find free-electron density as a coefficient of 10²⁷…
- GATE 2024 XE — all source sections Q65 – Consider a unidirectionally aligned continuous glass fibre reinforced epoxy composite with 40 vol. % reinforcement. The elastic modulus of the…
- GATE 2025 XE — all source sections Q45 – The unit of measurement for magnetic dipole moment of a body is
- GATE 2025 XE — all source sections Q46 – B is the magnetic flux density and Tc is the critical temperature. The Meissner effect is represented by
- GATE 2025 XE — all source sections Q50 – Which of the following phenomenon/phenomena contribute to intensity loss of electromagnetic radiation during transmission through a medium?
- GATE 2025 XE — all source sections Q52 – A GaP–GaAs LED has band gap1.9 eV. Find the emitted wavelength in µm, to two decimals. Use h = 6.63 × 10⁻³⁴ J s, c = 3 × 10⁸ m s⁻¹ and 1 eV = 1.6 ×…
- GATE 2025 XE — all source sections Q58 – For an elemental BCC crystal, the100 and110 surface energies per area are S100 and S110. Find S100/S110, to one decimal.
- GATE 2025 XE — all source sections Q59 – A100-cm copper wire has10 V across it, electron density8.43 × 10²² cm⁻³ and resistivity1.67 × 10⁻⁶ Ω cm. Find average electron drift speed in cm/s, to…
- GATE 2025 XE — all source sections Q60 – A7-km aluminium line carries100 A with at most2 MW resistive loss. For conductivity3.77 × 10⁵ Ω⁻¹ cm⁻¹, find the minimum circular-wire diameter in mm,…
- GATE 2025 XE — all source sections Q61 – A copper plate’s electron cloud is displaced1.1 × 10⁻¹⁸ m relative to nuclei. Copper is FCC with a = 0.362 nm, Z = 29. Find electronic polarization…
- GATE 2026 XE — all source sections Q44 – A material has band gap Eg and an incident photon has energy Ep. Which condition permits the interband optical absorption intended here?
- GATE 2026 XE — all source sections Q48 – Which are polarization mechanisms in dielectric solids?
- GATE 2026 XE — all source sections Q60 – In the quantum free-electron theory of metals, which statements about valence electrons are correct?
- GATE 2026 XE — all source sections Q61 – Iron has density 7.87 g cm⁻³, atomic mass 55.84 g mol⁻¹ and moment 2.22 Bohr magnetons per atom. Given B=9.2710-24 A m² and N A=6.0231023 mol⁻¹,…
- GATE 2026 XE — all source sections Q62 – A ductile metal reaches its maximum engineering stress at engineering strain 0.2. Its true flow curve is =Kn, with K=200 MPa. Find the engineering…
- GATE 2026 XE — all source sections Q63 – A silicon cube of volume 1 cm³ is doped with one As atom per 109 Si atoms. Given Si atom density 51022 cm⁻³, intrinsic carrier concentration 1010…