GATE Materials Science (XE2): Degradation of Materials – Previous Year Questions
9 GATE previous year questions on Degradation of Materials (Materials Science (XE2), Engineering Sciences) with answers and explanations, from every paper.
9 questions worth 15 marks in all (3 1-mark, 6 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q64 – During oxidation of a metal at 600°C, isothermal weight gain per unit area ( W/A, with W in mg and A in cm2) follows a parabolic rate law. If W/A=1.0…
- GATE 2019 XE — all source sections Q45 – Pilling-Bedworth ratios for oxides of some metals are given below. Based on the Pilling-Bedworth ratio alone, which metal will be most protected from…
- GATE 2019 XE — all source sections Q57 – Nickel corrodes at 298 K in a solution of 0.06 M nickel chloride having pH 4. Assuming complete dissociation of nickel chloride, the partial pressure…
- GATE 2023 XE — all source sections Q64 – For Zn(s) + 2H⁺→H₂ + Zn²⁺, Ecell = + 0.690 V at 298 K and H₂ pressure1 atm. Given RT/F = 0.0256 V, standard Zn²⁺/Zn reduction potential − 0.762 V and…
- GATE 2024 XE — all source sections Q50 – Which of the following is/are responsible for pitting corrosion in a metal ?
- GATE 2025 XE — all source sections Q63 – At298 K and 1 atm, the reduction-potential-versus-pH slopes for NiO + 2H⁺ + 2e⁻⇌Ni + H₂O and 2H⁺ + 2e⁻⇌H₂ are S₁, S₂. Find S₁/S₂, to one decimal.
- GATE 2025 XE — all source sections Q65 – Iron dissolves as Fe²⁺ at corrosion-current density2 × 10⁻⁴ A/cm². Find corrosion penetration in mm/year, to one decimal. Use molar mass55.85 g/mol,…
- GATE 2026 XE — all source sections Q45 – Plastic chairs left in sunlight for several days become discoloured and lose mechanical strength. Which degradation category is most directly…
- GATE 2026 XE — all source sections Q65 – Standard reduction potentials are E°(Cu²⁺/Cu)=+0.34 V and E°(Zn²⁺/Zn)=−0.76 V. Find the standard EMF of Zn Zn²⁺ Cu²⁺ Cu in volts, to two decimal…