GATE Solid Mechanics (XE3): Mechanics of Rigid Bodies – Previous Year Questions
39 GATE previous year questions on Mechanics of Rigid Bodies (Solid Mechanics (XE3), Engineering Sciences) with answers and explanations, from every paper.
39 questions worth 57 marks in all (21 1-mark, 18 2-mark). Asked between 2020 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q66 – Which statement is true for a body moving on a dry surface under applied forces?
- GATE 2020 XE — all source sections Q69 – The angular momentum of a particle moving under a central force is
- GATE 2020 XE — all source sections Q71 – A rigid square ABCD is subjected to planar forces at its corners as shown. The equivalent force-couple system at corner A can be represented by which…
- GATE 2020 XE — all source sections Q72 – A particle of mass 0.1 kg is released from rest and falls vertically under gravity in a fluid. The fluid offers a resistive force linearly…
- GATE 2020 XE — all source sections Q74 – Two point masses m=10 kg and M=30 kg are connected by a massless inextensible string passing over a massless, frictionless pulley of radius a=100 mm,…
- GATE 2020 XE — all source sections Q82 – A 100 kg particle is released from rest and falls through height H=1 m onto an upright massless elastic bar of length L=200 mm, Young's modulus 200…
- GATE 2023 XE — all source sections Q66 – A plane truss is simply supported at P and R as shown. A downward force F is applied at hinge Q. The axial force developed in member PS is
- GATE 2023 XE — all source sections Q67 – A massless rod of length L pivots frictionlessly at O and carries a point mass m at P. Released from rest horizontally, it swings downward under…
- GATE 2023 XE — all source sections Q72 – A rod is subjected to three forces as shown in the figure on the left. An equivalent force system with forces F1, F2 and moment M is shown in the…
- GATE 2023 XE — all source sections Q73 – A simply supported beam of length 3 m is loaded as shown in the figure. The magnitude of the shear force (in kN) at the mid-point of the beam is…
- GATE 2023 XE — all source sections Q75 – A uniform disk (mass m, radius R) rolls at centre speed v and strikes a step of height3R/20. During impact it neither rebounds nor slips at the corner…
- GATE 2023 XE — all source sections Q81 – A10-kg ball hangs in an accelerating carriage from two strings each60° to the horizontal. Right tension is twice left tension. With g = 10 m/s², find…
- GATE 2023 XE — all source sections Q82 – A10-kg block on a30° incline is held by force F directed up and parallel to the plane. Static friction coefficient is 0.3 and g = 10 m/s². Find…
- GATE 2023 XE — all source sections Q83 – A10-kg ball approaches a frictionless rigid wall at 2 m/s, making60° with the wall. Restitution coefficient is 0.9. Find rebound angleα measured from…
- GATE 2024 XE — all source sections Q67 – An L-shaped rigid member is fixed at the midpoint of a simply-supported beam, as shown in figure (i). The member is subjected to a vertically downward…
- GATE 2024 XE — all source sections Q68 – A block at rest is pushed horizontally rightward through its centre of gravity by P. W is weight, N the resultant surface normal and F friction. Which…
- GATE 2024 XE — all source sections Q71 – An ice-skater starts spinning during her performance. As she retracts her arms and legs closer to her body, her angular velocity .
- GATE 2024 XE — all source sections Q74 – A particle of mass 1 kg is attached to one end of a spring having stiffness of 125 N/m. The free length of the spring is 100 mm. The system is rotated…
- GATE 2024 XE — all source sections Q77 – A pin-jointed truss has a pin support at the point E and a roller support at the point F. A horizontal force P is applied at pin H as shown in the…
- GATE 2024 XE — all source sections Q78 – Two identical rigid slender bars of length 2L and mass 𝑚 are acted upon by a transverse force F at one of the ends as shown in the figure. In the…
- GATE 2024 XE — all source sections Q81 – A massless rigid horizontal bar PQR is hinged at P, with PQ = 2 m, QR = 1 m. A vertical spring supports Q from below. A downward560-N load at R…
- GATE 2024 XE — all source sections Q85 – A turn-table is rotating about its center with an angular velocity of 2 rad/s in the counter-clockwise direction. There is a groove in the turn-table…
- GATE 2024 XE — all source sections Q86 – The system shown in the figure is in static equilibrium. The spring is massless and has a spring constant of K = 1 kN/m. The free length of the spring…
- GATE 2024 XE — all source sections Q87 – A1-m-square block of mass10 kg rests on a horizontal surface with static friction coefficient0.75. A gradually increased horizontal force acts at…
- GATE 2025 XE — all source sections Q67 – A ball of mass 5m approaches a stationary ball of mass m with a horizontal velocity of 2 m/s from left to right. After a perfectly elastic central…
- GATE 2025 XE — all source sections Q70 – P follows Q on a straight road with 60-m initial separation. P initially travels36 km/h and Q maintains18 km/h. P brakes with uniform deceleration;…
- GATE 2025 XE — all source sections Q74 – A force of P = 100 N is applied at the ends of the pliers as shown in the figure. Neglecting friction, the force exerted by the upper jaw on the…
- GATE 2025 XE — all source sections Q75 – Consider two blocks, P of mass 100 kg and Q of mass 150 kg, resting as shown in the figure. The angle 𝜃 = 30°. The coefficient of friction between…
- GATE 2025 XE — all source sections Q77 – Rod PQ rotates counter-clockwise about fixed hinge P at constant15 rad/s. Slider R is 0.5 m from P along its slot, with relative speed5 m/s and zero…
- GATE 2025 XE — all source sections Q78 – The frame shown in the figure is loaded at S with a force of 2000 N. The reactions at T are denoted by Tx and Ty, while the reaction at W is Wy.…
- GATE 2025 XE — all source sections Q86 – An electric motor’s rotor is spinning at 1500 rpm when its load and power are cut- off. The rotor which has a mass of 50 kg and a radius of gyration…
- GATE 2026 XE — all source sections Q66 – Two axial members OP and OQ are pin-connected at O. Applied forces are F at P in the positive x direction and 3F at Q in the positive y direction.…
- GATE 2026 XE — all source sections Q67 – Two smooth drums, each of weight W and radius r, are connected by a stiff rope of length h. A force F acts on a massless lever RS of length l as…
- GATE 2026 XE — all source sections Q68 – Identify the zero-force member of the shown pin-jointed truss. The load at S is 10 kN; P is a pin support and T a roller support.
- GATE 2026 XE — all source sections Q71 – A car travels horizontally in a straight line at constant 3 m/s. At t=0 a ball is thrown vertically upward from its top at 20 m/s. With g=10 m/s², at…
- GATE 2026 XE — all source sections Q72 – A cart of weight 5 kN rests on a smooth plane inclined at 45°. A horizontal force F maintains equilibrium. Find the magnitude of F in kN, as an…
- GATE 2026 XE — all source sections Q75 – A massless wheeled block is in static equilibrium. A force of 2 N acts perpendicular to its sloping face, whose angle to the horizontal is θ. The…
- GATE 2026 XE — all source sections Q81 – P and Q of a rigid equilateral triangular plate are constrained to vertical and horizontal channels, respectively. PQ=4 m. At the shown instant, PQ…
- GATE 2026 XE — all source sections Q82 – A motorized pulley of diameter 200 mm pulls a 100-kg block uphill on a 30° ramp. The rope is parallel to the ramp, the static-friction coefficient is…