The GATE Grind

GATE Polymer Science and Engineering (XE5): Polymer Chemistry – Previous Year Questions

31 GATE previous year questions on Polymer Chemistry (Polymer Science and Engineering (XE5), Engineering Sciences) with answers and explanations, from every paper.

31 questions worth 45 marks in all (17 1-mark, 14 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2020 XE — all source sections Q110 (1 mark, Multiple choice) – The solvent in which chain transfer is maximum in a radical polymerization is
  2. GATE 2020 XE — all source sections Q111 (1 mark, Multiple choice) – The monomer that cannot be polymerized by anionic polymerization is
  3. GATE 2020 XE — all source sections Q113 (1 mark, Multiple choice) – The polymer with the minimum number of branches is
  4. GATE 2020 XE — all source sections Q115 (1 mark, Multiple choice) – Aramid is a
  5. GATE 2020 XE — all source sections Q119 (2 marks, Multiple choice) – Match each polymer in Column A with its polymerization method in Column B. Column A: P, bisphenol A polycarbonate; Q, polyethylene; R,…
  6. GATE 2020 XE — all source sections Q124 (2 marks, Numerical answer) – The number-average molecular weight of a polyester formed from an equimolar mixture of adipic acid and ethylene glycol at 99.5% conversion is (round…
  7. GATE 2020 XE — all source sections Q125 (2 marks, Numerical answer) – For a freely-jointed linear polyethylene chain with molar mass 1.4105 g/mol, calculate the root-mean-square end-to-end distance (nm), rounded to one…
  8. GATE 2019 XE — all source sections Q110 (1 mark, Multiple choice) – The functionality of allyl alcohol (CH 2=CH-CH 2OH) for condensation reaction with terephthalic acid is
  9. GATE 2019 XE — all source sections Q113 (1 mark, Multiple choice) – If sodium and naphthalene are used to initiate polymerization of styrene, the most likely polymerization mechanism is
  10. GATE 2019 XE — all source sections Q115 (1 mark, Multiple choice) – The copolymer(s) among high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE) is/are
  11. GATE 2019 XE — all source sections Q116 (1 mark, Multiple choice) – The polymer that lacks the ability to exhibit tacticity is
  12. GATE 2019 XE — all source sections Q129 (2 marks, Numerical answer) – For AIBN-initiated polymerization of styrene, if both the monomer and initiator concentrations are doubled, the rate of polymerization increases by a…
  13. GATE 2019 XE — all source sections Q130 (2 marks, Numerical answer) – If 49 moles of hexamethylene diamine are reacted with 50 moles of adipic acid to prepare Nylon 66, the number-average molecular weight (M n) of the…
  14. GATE 2023 XE — all source sections Q110 (1 mark, Multiple choice) – Which one of the monomers given is used in the synthesis of cellulose?
  15. GATE 2023 XE — all source sections Q112 (1 mark, Multiple choice) – Identify the monomers that synthesize the depicted crosslinked polymer.
  16. GATE 2023 XE — all source sections Q118 (1 mark, Multiple choice) – Choose the correct option that best correlates the graphs with the polymerization methods.
  17. GATE 2023 XE — all source sections Q122 (2 marks, Multiple select) – Among the options given, identify the correct pair (s) of catalyst and co-catalyst that form a Ziegler-Natta catalyst.
  18. GATE 2023 XE — all source sections Q125 (2 marks, Multiple select) – Among the options given, which method (s) is/are used for the synthesis of atactic polystyrene?
  19. GATE 2024 XE — all source sections Q110 (1 mark, Multiple choice) – Phenol-formaldehyde resin is prepared by
  20. GATE 2024 XE — all source sections Q113 (1 mark, Multiple choice) – Nitrile rubber is the copolymer of
  21. GATE 2024 XE — all source sections Q118 (1 mark, Multiple select) – Which of the following polymers is/are synthesized by ring opening polymerization?
  22. GATE 2024 XE — all source sections Q119 (2 marks, Multiple choice) – In terminal-model radical copolymerization, P1 is M1* + M1→M1* with k11; P2 is M1* + M2→M2* with k12; P3 is M2* + M1→M1* with k21; P4 is M2* + M2→M2*…
  23. GATE 2024 XE — all source sections Q127 (2 marks, Numerical answer) – Polyamide 66 is prepared by the condensation polymerization of 0.08 mol of hexamethylenediamine with 0.08 mol of adipic acid. At the end of the…
  24. GATE 2025 XE — all source sections Q117 (1 mark, Multiple choice) – Match P polyurethane, Q epoxy, R polyimide, S polyester with monomer pairs1 maleic acid + propylene glycol,2 pyromellitic anhydride + p,…
  25. GATE 2025 XE — all source sections Q125 (2 marks, Multiple select) – Copolymerization reactivity ratios (r₁, r₂) are I:(0.1,10), II:(0.003,0.02), III:(3.4,5.6), IV:(51,0.01). Which offered case/type identifications are…
  26. GATE 2025 XE — all source sections Q127 (2 marks, Numerical answer) – The heat of polymerization of ethylene is 25 Kcal/mol. The amount of heat generated during the polymerization of 5.6 Kg polyethylene is Kcal. (Round…
  27. GATE 2026 XE — all source sections Q110 (1 mark, Multiple choice) – Which polymerization method is used to synthesize butyl rubber?
  28. GATE 2026 XE — all source sections Q112 (1 mark, Multiple choice) – The Norrish–Smith or Trommsdorff effect at high conversion during free-radical bulk polymerization is characterized by what?
  29. GATE 2026 XE — all source sections Q120 (2 marks, Multiple choice) – Resol is produced by which reaction?
  30. GATE 2026 XE — all source sections Q124 (2 marks, Multiple choice) – Match initiators P BF₃/H₂O, Q n-C₄H₉Li, R FeCl₂/K₂S₂O₈ and S metallocene/methylaluminoxane with I anionic, II cationic, III coordination-addition and…
  31. GATE 2026 XE — all source sections Q129 (2 marks, Numerical answer) – An equimolar mixture of terephthalic acid and butylene glycol forms a polyester. Reaction stops at 99.6% conversion of the acid monomer. Estimate…