GATE Polymer Science and Engineering (XE5): Synthesis, Manufacturing and Properties – Previous Year Questions
23 GATE previous year questions on Synthesis, Manufacturing and Properties (Polymer Science and Engineering (XE5), Engineering Sciences) with answers and explanations, from every paper.
23 questions worth 32 marks in all (14 1-mark, 9 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q112 – The elastomer that retains flexibility at the lowest temperature is
- GATE 2020 XE — all source sections Q114 – The nearest value of the electrical conductivity of Nylon 6 is
- GATE 2020 XE — all source sections Q118 – The change in stress of a polymer as a function of time at fixed strain is known as
- GATE 2020 XE — all source sections Q130 – Assume each cross-link produced during polyisoprene vulcanization contains an average of two sulfur atoms and sulfur is present only in cross-links.…
- GATE 2020 XE — all source sections Q131 – A 160 N tensile force is applied to vulcanized rubber with dimensions 30 mm 4 mm 4 mm. Assuming incompressibility, if the sample elongates to 150% of…
- GATE 2019 XE — all source sections Q111 – Which polymer can be synthesized by ring-opening polymerization?
- GATE 2019 XE — all source sections Q112 – The weather-resistant polymer among the following is
- GATE 2019 XE — all source sections Q114 – Hypalon is the trade name for
- GATE 2019 XE — all source sections Q121 – Match the products with the most suitable polymer for their manufacture. Products: (P) Electrical cables; (Q) Electrical switches; (R) Optical lenses;…
- GATE 2019 XE — all source sections Q126 – A polypropylene bar with a 10 mm 10 mm square cross section is 225 mm long. Its modulus is 861 MN m-2. It is pinned at both ends and an axial…
- GATE 2023 XE — all source sections Q116 – Match P HDPE, Q poly (vinylcarbazole), R PMMA, S polycarbonate with Tg ranges1 above200°C,2 145–155°C,3 − 100 to − 80°C,4 90–100°C.
- GATE 2023 XE — all source sections Q117 – For P atactic polypropylene, Q syndiotactic polystyrene, R Nylon6, S PET, select the source’s decreasing-crystallinity order.
- GATE 2023 XE — all source sections Q120 – Among the options given, which agents are used to vulcanize or cure rubbers?
- GATE 2024 XE — all source sections Q111 – Melting phenomenon in a semi-crystalline polymer is a order phase transition.
- GATE 2024 XE — all source sections Q123 – Biaxially oriented poly (propylene) exhibits high clarity because layering of the crystalline structures
- GATE 2025 XE — all source sections Q112 – Under which combination of conditions does the glass transition of a polymer increase?
- GATE 2025 XE — all source sections Q114 – Polymer “Z” has a high melting point and it decomposes even before it melts. Hence, it is usually dissolved and subsequently regenerated. Rayon is one…
- GATE 2025 XE — all source sections Q116 – Crystallization is favored in polymer melts when the chain entanglement is and only polymers with molecular arrangement can crystallize.
- GATE 2025 XE — all source sections Q118 – Thermoplastic Polyurethane and Polyamide 6 both contain amide linkages, but when compared to Polyurethane, Polyamide 6 shows higher melting point due…
- GATE 2025 XE — all source sections Q131 – A rubber contains 70 wt% butadiene (molar mass = 54 g/mol), 20 wt% isoprene (molar mass = 68 g/mol), 5 wt% sulfur and 5 wt% carbon black. Assume that…
- GATE 2026 XE — all source sections Q118 – A polymer dielectric has relative permittivity 5.0. Vacuum permittivity is 8.8510-12 F/m. Express polymer permittivity as 10-12 F/m, to two decimals.
- GATE 2026 XE — all source sections Q119 – Match P natural rubber, Q gutta-percha, R neoprene and S butyl rubber with major polymeric constituents I polyisobutylene, II polychloroprene, III…
- GATE 2026 XE — all source sections Q121 – Match polymers P poly (p-phenylene sulfide), Q poly (ether sulfone), R poly (ether ether ketone) and S polycarbonate with the monomer sets I–IV…