The GATE Grind

GATE Polymer Science and Engineering (XE5): Polymer Testing – Previous Year Questions

5 GATE previous year questions on Polymer Testing (Polymer Science and Engineering (XE5), Engineering Sciences) with answers and explanations, from every paper.

5 questions worth 10 marks in all (5 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2019 XE — all source sections Q122 (2 marks, Multiple choice) – The order of limiting oxygen index for the following polymers is: polypropylene (PP), polytetrafluoroethylene (PTFE), and poly(vinyl chloride) (PVC).
  2. GATE 2023 XE — all source sections Q124 (2 marks, Multiple select) – Stress versus elongation profiles for different polymeric materials are shown in the figure. Choose the combination that best describes these…
  3. GATE 2024 XE — all source sections Q121 (2 marks, Multiple choice) – Match P notched Izod impact strength, Q flexural strength, R dielectric strength, S complex viscosity with units1 Pa s,2 J/m,3 MPa,4 kV/cm.
  4. GATE 2025 XE — all source sections Q123 (2 marks, Multiple select) – Match P Hildebrand solubility parameter, Q loss modulus, R toughness, S flexural strength with units1 Pa,2 J m⁻³,3 MPa½,4 kg m⁻¹ s⁻². Which offered…
  5. GATE 2026 XE — all source sections Q128 (2 marks, Numerical answer) – A plastic specimen of cross-sectional area 240 mm² carries a tensile force of 15,000 N and is stated to deform elastically. Its Young’s modulus is…