The GATE Grind

GATE Solid Mechanics (XE3): Mechanics of Solids – Previous Year Questions

16 GATE previous year questions on Mechanics of Solids (Solid Mechanics (XE3), Engineering Sciences) with answers and explanations, from every paper.

16 questions worth 24 marks in all (8 1-mark, 8 2-mark).

  1. GATE 2019 XE — all source sections Q66 (1 mark, Multiple choice) – For a pinned-pinned slender column of length L, uniform circular cross section, and second moment of area I, the critical buckling load is P cr. For a…
  2. GATE 2019 XE — all source sections Q67 (1 mark, Multiple choice) – Two rods P and Q of uniform circular cross section are made of the same material and carry identical uniaxial tensile loads. Rod P is twice as long as…
  3. GATE 2019 XE — all source sections Q68 (1 mark, Multiple choice) – The frame comprises members ABC, CD, and BEDF. The frame is fixed at A, and the connections between the three members are pins. Load P is applied at…
  4. GATE 2019 XE — all source sections Q70 (1 mark, Multiple choice) – In a bending-moment diagram of a simply supported beam, a discontinuity in bending moment occurs
  5. GATE 2019 XE — all source sections Q71 (1 mark, Multiple choice) – For a solid circular shaft fixed at one end with a torque applied at the other end, which statement is true?
  6. GATE 2019 XE — all source sections Q72 (1 mark, Multiple choice) – Flexural stress occurs in a straight beam when it is subjected to
  7. GATE 2019 XE — all source sections Q73 (1 mark, Multiple choice) – The bending moment at a point in a beam changes sign. Which statement is always true?
  8. GATE 2019 XE — all source sections Q74 (1 mark, Numerical answer) – The plane-stress state at a point is x=5 MPa, y=-1 MPa, and xy=4 MPa. If one principal stress at the point is 7 MPa, the other non-zero principal…
  9. GATE 2019 XE — all source sections Q76 (2 marks, Multiple choice) – A cantilever beam of constant cross section is subjected to a positive moment M and a positive axial force F as shown. The normal stress due to F is…
  10. GATE 2019 XE — all source sections Q79 (2 marks, Multiple choice) – A simply supported beam is subjected to a concentrated force P=48000 N at mid-span. Its flexural rigidity is EI=11106 N m2. The curvature between Q…
  11. GATE 2019 XE — all source sections Q80 (2 marks, Multiple choice) – The shear-force (V) diagram for a cantilever beam with loads applied at points B and C is shown. The magnitudes of the applied forces at B (F B) and C…
  12. GATE 2019 XE — all source sections Q81 (2 marks, Numerical answer) – A 1 m long bar with uniform cross-sectional area 1000 mm2 is fixed at one end and subjected to a uniaxial tensile load of 200 kN at the other end. It…
  13. GATE 2019 XE — all source sections Q82 (2 marks, Numerical answer) – A solid rod with uniform circular cross section, length 1000 mm and diameter 100 mm, is subjected to uniaxial tension. Its length increases by 1 mm…
  14. GATE 2019 XE — all source sections Q83 (2 marks, Numerical answer) – A spherical pressure vessel has inner diameter 4 m and wall thickness 10 mm. It is made of steel with tensile yield strength 200 MPa. Neglecting…
  15. GATE 2019 XE — all source sections Q84 (2 marks, Numerical answer) – Two solid shafts P and Q of the same material transmit equal torque. Shaft P has uniform circular cross-sectional area A and shaft Q has area 4A. If…
  16. GATE 2019 XE — all source sections Q87 (2 marks, Numerical answer) – A beam with constant solid rectangular cross section is subjected to pure bending. Longitudinal strain at point A is 3.010-5. If Young's modulus is…