GATE Digital Circuits: Computer Organization – Previous Year Questions
11 GATE previous year questions on Computer Organization (Digital Circuits, Electronics and Communication Engineering) with answers and explanations, from every paper.
11 questions worth 17 marks in all (5 1-mark, 6 2-mark). Asked between 2014 and 2024, so you can see how the topic has been tested over time.
- GATE 2016 EC (EC3) Q26 – In an 8085, the accumulator is A7 hexadecimal and the carry flag is 0. After executing RLC, the accumulator and carry respectively are
- GATE 2016 EC (EC2) Q52 – An 8 Kbyte ROM with active-low chip select CS is used with an 8085. It must occupy addresses 1000H–2FFFH. Address bits run from A 15 (most…
- GATE 2014 EC (EC4) Q52 – An 8085 executes STA 1234H starting at address 1FFEH. STA copies the accumulator to the specified 16-bit address. During fetch and execution, what…
- GATE 2014 EC (EC2) Q52 – The figure shows an 8085 interface for input of eight-bit digital data DI₀–DI₇ from an external device. Which instruction transfers it correctly?
- GATE 2017 EC Q26 – The clock frequency of an 8085 microprocessor is 5 MHz. If the time required to execute an instruction is 1.4 s, then the number of T-states needed…
- GATE 2017 EC Q55 – The following FIVE instructions were executed on an 8085 microprocessor. The Accumulator value immediately after the execution of the fifth…
- GATE 2015 EC Q24 – In an 8085 microprocessor, the shift registers which store the result of an addition and the overflow bit, respectively
- GATE 2016 EC Q54 – In an 8085 system, a PUSH operation requires more clock cycles than a POP operation. Which one of the following options is the correct reason for…
- GATE 2020 EC Q29 – In an 8085 microprocessor, the number of address lines required to access a 16 K byte memory bank is .
- GATE 2021 EC Q42 – The content of the registers are R 1=25H, R 2=30H and R 3=40H. The following machine instructions are executed. PUSHR1 PUSHR2 PUSHR3 POPR1 POPR2 POPR3…
- GATE 2024 EC Q27 – A machine has a 32-bit architecture with 1-word long instructions. It has 24 registers and supports an instruction set of size 40. Each instruction…