GATE Solid Mechanics: Uniform torsion and combined stresses – Previous Year Questions
6 GATE previous year questions on Uniform torsion and combined stresses (Solid Mechanics, Civil Engineering) with answers and explanations, from every paper.
6 questions worth 8 marks in all (4 1-mark, 2 2-mark). Asked between 2017 and 2024, so you can see how the topic has been tested over time.
- GATE 2017 CE (CE2) Q49 – A hollow circular shaft has outside and inside diameters 100 and 50 mm. With allowable maximum shear stress 125 MPa, maximum torque is kN m.
- GATE 2018 CE (CE1) Q18 – A solid circular beam of radius 0.25 m and length 2 m carries only a 20 kN m twisting moment about z at its free end, as shown. At point M on the…
- GATE 2019 CE (CE2) Q15 – A closed thin-walled tube has thickness t, mean enclosed area A m within its wall centreline, and shear stress τ. Find torsional resistance T.
- GATE 2021 CE (CE2) Q29 – A fixed stepped solid shaft OPQ has diameters 0.10 m in OP and 0.08 m in PQ. Same-direction torques 2 kN·m and 1 kN·m act at P and Q. Material shear…
- GATE 2023 CE (CE2) Q14 – A circular solid shaft of span L = 5 m is fixed at one end and free at the other end. A torque T = 100 kN.m is applied at the free end. The shear…
- GATE 2024 CE (CE1) Q40 – A homogeneous shaft PQR with fixed supports at both ends is subjected to a torsional moment T at point Q, as shown in the figure. The polar moments of…