The GATE Grind

GATE Construction Materials: Concrete: constituents, mix design, short-term and long-term properties – Previous Year Questions

18 GATE previous year questions on Concrete: constituents, mix design, short-term and long-term properties (Construction Materials, Civil Engineering) with answers and explanations, from every paper.

18 questions worth 21 marks in all (15 1-mark, 3 2-mark). Asked between 2016 and 2025, so you can see how the topic has been tested over time.

  1. GATE 2016 CE (CE2) Q46 (2 marks, Numerical answer) – A 450 mm long plain concrete prism is subjected to the concentrated vertical loads as shown in the figure. Cross section of the prism is given as 150…
  2. GATE 2017 CE (CE2) Q25 (1 mark, Multiple choice) – Characteristic strength is defined here as the strength below which not more than 50% of test results are expected to fall. With standard deviation 4…
  3. GATE 2018 CE (CE1) Q17 (1 mark, Multiple choice) – Concrete deformation due to sustained loading is .
  4. GATE 2019 CE (CE2) Q17 (1 mark, Multiple choice) – Fine aggregate has fineness modulus 4.3. In which interval does its mean particle size lie?
  5. GATE 2019 CE (CE2) Q31 (1 mark, Numerical answer) – Required characteristic concrete compressive strength is 25 MPa; observed standard deviation is 4 MPa. Trial mixes with w/c percentages 45, 50, 55 and…
  6. GATE 2019 CE (CE2) Q49 (2 marks, Numerical answer) – An M25 concrete specimen at stress 12.5 MPa initially strains 50010-6. After a long time its strain increases to 100010-6. Under IS 456:2000,…
  7. GATE 2019 CE (CE1) Q48 (2 marks, Numerical answer) – A 50 cm × 50 cm × 50 cm box is filled to the top with 187.5 kg of coarse aggregate. Aggregate water absorption is 0.5% and specific gravity 2.5. Find…
  8. GATE 2020 CE (CE2) Q18 (1 mark, Multiple choice) – As per IS 456:2000, pH of concrete mixing water shall NOT be less than .
  9. GATE 2020 CE (CE2) Q29 (1 mark, Numerical answer) – A 150 mm diameter, 300 mm long concrete cylinder fails at 157 kN in the IS 5816:1999 split tensile test. Find split tensile strength (MPa), to one…
  10. GATE 2021 CE (CE2) Q18 (1 mark, Multiple choice) – Seasoning construction timber is essentially done to
  11. GATE 2023 CE (CE2) Q15 (1 mark, Multiple choice) – M20 concrete as per IS 456: 2000 refers to concrete with a design mix having .
  12. GATE 2023 CE (CE1) Q13 (1 mark, Multiple choice) – Creep of concrete under compression is defined as the .
  13. GATE 2023 CE (CE1) Q15 (1 mark, Multiple choice) – In cement concrete mix design, with the increase in water-cement ratio, which one of the following statements is TRUE?
  14. GATE 2024 CE (CE1) Q15 (1 mark, Multiple choice) – Concrete of characteristic strength 30 MPa is required. If 40 specimens of concrete cubes are to be tested, the minimum number of specimens having at…
  15. GATE 2025 CE (CE2) Q13 (1 mark, Multiple choice) – Consider the following statements (P) and (Q): (P): Fly ash and ground granulated blast furnace slag can be used as mineral admixtures in concrete.…
  16. GATE 2025 CE (CE2) Q23 (1 mark, Multiple select) – In the context of construction materials, which of the following statements is/are CORRECT?
  17. GATE 2025 CE (CE1) Q16 (1 mark, Multiple choice) – Identify the FALSE statement from the following options:
  18. GATE 2025 CE (CE1) Q33 (1 mark, Numerical answer) – If the weights retained on the 2.36 mm, 1.18 mm, 600 µm, and 300 µm sieves are 30%, 35%, 15%, and 20%, respectively, of the total weight of an…