The GATE Grind

GATE 2025 XE — all source sections – Previous Year Questions with Solutions

All 175 questions of GATE 2025 XE — all source sections with answers and explanations. Read each question, then practise it by topic or as a full paper.

175 questions worth 275 marks in all (75 1-mark, 100 2-mark). Subjects covered: Fluid Mechanics (XE1) (22), Materials Science (XE2) (22), Solid Mechanics (XE3) (22), Thermodynamics (XE4) (22), Polymer Science and Engineering (XE5) (22), Food Technology (XE6) (22), Atmospheric and Oceanic Sciences (XE7) (22), Engineering Mathematics (XE0) (11).

Practise this paper in The GATE Grind →

  1. Question 1 (1 mark, Multiple choice) – Even though I had planned to go skiing with my friends, I had to at the last moment because of an injury. Select the most appropriate option to…
  2. Question 2 (1 mark, Multiple choice) – The President, along with the Council of Ministers, to visit India next week. Select the most appropriate option to complete the above sentence.
  3. Question 3 (1 mark, Multiple choice) – An electricity utility company charges ₹ 7 per kWh (kilo watt-hour). If a 40-watt desk light is left on for 10 hours each night for 180 days, what…
  4. Question 4 (1 mark, Multiple choice) – In the context of the given figure, which one of the following options correctly represents the entries in the blocks labelled (i), (ii), (iii), and…
  5. Question 5 (1 mark, Multiple choice) – A bag contains Violet (V), Yellow (Y), Red (R), and Green (G) balls. On counting them, the following results are obtained: (i) The sum of Yellow balls…
  6. Question 6 (2 marks, Multiple choice) – "His life was divided between the books, his friends, and long walks. A solitary man, he worked at all hours without much method, and probably courted…
  7. Question 7 (2 marks, Multiple choice) – For the clock shown in the figure, if O* = O\ Q\ S\ Z\ P\ R\ T, and X* = X\ Z\ P\ W\ Y\ O\ Q, then which one among the given options is most…
  8. Question 8 (2 marks, Multiple choice) – Consider a five-digit number PQRST that has distinct digits P, Q, R, S, and T, and satisfies the following conditions: P < Q S > P > T R < T If…
  9. Question 9 (2 marks, Multiple choice) – A business person buys potatoes of two different varieties P and Q, mixes them in a certain ratio and sells them at ₹ 192 per kg. The cost of the…
  10. Question 10 (2 marks, Multiple choice) – Three villages P, Q, and R are located in such a way that the distance PQ = 13 km, QR = 14 km, and RP = 15 km. A straight road joins Q and R. It is…
  11. Question 11 (1 mark, Multiple choice) – Random variables X and Y each have mean 0 and variance1, and their correlation is 1/3. Find Var (X + 3Y).
  12. Question 12 (1 mark, Multiple choice) – Consider 4x2u xx+4(x+y)u xy+(x2+y2)u yy-u=0. Which statement is correct?
  13. Question 13 (1 mark, Multiple choice) – Consider P= n=2(n n)-1/n and Q= n=1nn/(2n)!. Which convergence statement is correct?
  14. Question 14 (1 mark, Multiple choice) – Suppose the polynomial 𝑎 + 𝑏𝑥 + 𝑐𝑥2 + 𝑑𝑥3 interpolates the data, ( − 1, 1), (0, 3), (1, 2) and (2, 4). Then which one of the following…
  15. Question 15 (1 mark, Multiple choice) – C is the positively oriented boundary between y=2x2 and y2=4x. Evaluate C(2y2+2xy+4y)\,dx+(x2+4xy+8x)\,dy.
  16. Question 16 (1 mark, Numerical answer) – For x>0, solve x2y+xy-y=0, with y(1)=0,y(1)=2. Find y(1/2) as an integer.
  17. Question 17 (1 mark, Numerical answer) – If2 is an eigenvalue of A=pmatrix0&3&-\\0&1&0\\1&-1&3pmatrix, find as an integer.
  18. Question 18 (2 marks, Multiple choice) – Analytic f satisfies Ref(z)=3x2-4y-3y2, f(i)=0 and f(0)=0. Find f(1).
  19. Question 19 (2 marks, Multiple choice) – For f(x,y)=x2y+2xy2-2x2y2, which statement is correct?
  20. Question 20 (2 marks, Multiple select) – For real a, b, the system is x+y+az=2, 2y+2z=1, ax+2z=b. Which listed parameter choices give infinitely many solutions?
  21. Question 21 (2 marks, Numerical answer) – Let u t-u xx-u=0 for 0<x<,t>0, with u(0,t)=u(,t)=0 and u(x,0)=2(3x/2)(x/2). Find tu(3/4,t) to two decimals.
  22. Question 22 (1 mark, Multiple choice) – Fluid at a constant flow rate passes through a long, straight, cylindrical pipe that has an axisymmetric convergent section at the end. Which one of…
  23. Question 23 (1 mark, Multiple choice) – A sharp flat plate of length L and infinite width is immersed parallel to a fluid stream having velocity 𝑢∞. At a point on the plate, far away from…
  24. Question 24 (1 mark, Multiple choice) – Consider the following Statements [1] and [2]. Statement [1]: The Eulerian study focusses attention on individual particle and its motion is observed…
  25. Question 25 (1 mark, Multiple choice) – Statement of Reynolds Transport Theorem is given below with three blanks. The rate of change of extensive property can be calculated by summing the…
  26. Question 26 (1 mark, Multiple choice) – For steady incompressible flow, V=5x i-Py j+3 k. Find constant P satisfying mass conservation.
  27. Question 27 (1 mark, Multiple choice) – For steady incompressible axisymmetric flow,r-1 r(rV r)+ zV z=0. Which streamfunction definition satisfies it?
  28. Question 28 (1 mark, Multiple choice) – Match P dynamic viscosity, Q surface tension, R density with force-length-time dimensions1 FL⁻⁴T²,2 FL⁻²T,3 FL⁻¹.
  29. Question 29 (1 mark, Multiple choice) – Consider the steady, incompressible, and fully developed laminar flow of a fluid through a circular pipe. Here, ∆𝑃 is the pressure drop in the…
  30. Question 30 (1 mark, Multiple choice) – A doublet is the resulting flow pattern when a sink and a source of equal strength are brought together. Which one of the following options correctly…
  31. Question 31 (2 marks, Multiple choice) – Two immiscible liquids flow steadily between stationary plates x = − b and x = b, in the z direction. Fluid I occupies − b<x<0 and fluid II0<x<b, with…
  32. Question 32 (2 marks, Multiple choice) – Match the depicted symmetric two-dimensional bodies P–S at Re≥10⁴ with frontal-area drag coefficients1 = 1.2,2 = 1.6,3 = 2.1,4 = 2.3, according to…
  33. Question 33 (2 marks, Multiple choice) – A uniform-specific-gravity solid floats in a deep liquid. B, G, M are centre of buoyancy, centre of gravity and metacentre. Which statement describes…
  34. Question 34 (2 marks, Multiple choice) – Steady incompressible flow travels A→B→C→D. The diagram shows total-energy line TEL and hydraulic-grade line HGL. Which sequence describes connector…
  35. Question 35 (2 marks, Multiple choice) – The horizontal network carries steady incompressible flow1→4 through sections P, Q, R, S as shown. d, V, h denote each section’s diameter, speed and…
  36. Question 36 (2 marks, Numerical answer) – For T=x2+yt+35 and V=4xy i+(xt-2y2) j, find the total material rate of temperature change at(x, y) = (2,3), t = 2, as an integer.
  37. Question 37 (2 marks, Numerical answer) – Driven by a pressure gradient of 100 kPa/m, a fluid of dynamic viscosity 0.1 Pa.s flows between two fixed infinitely large parallel plates under…
  38. Question 38 (2 marks, Numerical answer) – An incompressible fluid is flowing between two infinitely large parallel plates separated by 5 mm distance. The bottom plate is stationary and the top…
  39. Question 39 (2 marks, Numerical answer) – Consider, a kite weighing 100 grams as essentially a rigid flat plate making an angle 8° with the horizontal and having a planform area of 0.045 m2…
  40. Question 40 (2 marks, Numerical answer) – A steady control volume has four sections, listed as(type, density kg/m³, outward-normal speed magnitude m/s, area m², specific energy J/kg):1: inlet,…
  41. Question 41 (2 marks, Numerical answer) – A ship is to be operated in a fluid medium with kinematic viscosity 0.032 × 10 − 3 m2/s. A one-tenth scale model of the ship is built for testing.…
  42. Question 42 (2 marks, Numerical answer) – Water flows through a pipe of diameter 20 cm at a flow rate of 0.025 m3/s. A pitot- static tube is placed at the centre of the pipe and indicates the…
  43. Question 43 (2 marks, Numerical answer) – An oil of density 870 kg/m3 and viscosity 0.036 Pa.s flows through a straight pipe of 10 cm diameter and 1.5 km length at the flow rate of 250 liters…
  44. Question 44 (1 mark, Multiple choice) – The figure below shows a plane PQR in a unit cell. The Miller indices of the plane PQR is
  45. Question 45 (1 mark, Multiple choice) – The unit of measurement for magnetic dipole moment of a body is
  46. Question 46 (1 mark, Multiple choice) – B is the magnetic flux density and Tc is the critical temperature. The Meissner effect is represented by
  47. Question 47 (1 mark, Multiple choice) – For Al – 4.5 wt% Cu alloy, the correct sequence of precipitation during age hardening at room temperature is
  48. Question 48 (1 mark, Multiple select) – There is NO base-centered cubic lattice among the list of 14 Bravais lattices because of one or more of the following reasons
  49. Question 49 (1 mark, Multiple select) – For a conventional optical microscope, which of the following options regarding the resolution limit and the depth of field is/are correct?
  50. Question 50 (1 mark, Multiple select) – Which of the following phenomenon/phenomena contribute to intensity loss of electromagnetic radiation during transmission through a medium?
  51. Question 51 (1 mark, Numerical answer) – If solid tin is in equilibrium with its vapor, the degree of freedom is (answer in integer)
  52. Question 52 (1 mark, Numerical answer) – A GaP–GaAs LED has band gap1.9 eV. Find the emitted wavelength in µm, to two decimals. Use h = 6.63 × 10⁻³⁴ J s, c = 3 × 10⁸ m s⁻¹ and 1 eV = 1.6 ×…
  53. Question 53 (2 marks, Multiple choice) – In an FCC crystal with lattice parameter a, consider the reaction of two leading partial dislocations, AB and CD, at the line of intersection of their…
  54. Question 54 (2 marks, Multiple choice) – Match SEM detectors P secondary electrons, Q backscattered electrons, R energy-dispersive spectroscopy, S electron backscatter diffraction with 1…
  55. Question 55 (2 marks, Multiple choice) – For the depicted one-component P–T diagram with triple point (TI, PI), which G-versus-T graph is correct at pressure PI? GS, GL, GV denote solid,…
  56. Question 56 (2 marks, Multiple choice) – Eutectoid steel is fully austenitized at 1073 K, rapidly cooled to the specified hold, and finally quenched to 300 K. Match P300 K indefinitely, Q873…
  57. Question 57 (2 marks, Numerical answer) – An elemental FCC powder gives first and third diffraction peaks at Bragg angles x and y. Find sin (y)/sin (x), to one decimal.
  58. Question 58 (2 marks, Numerical answer) – For an elemental BCC crystal, the100 and110 surface energies per area are S100 and S110. Find S100/S110, to one decimal.
  59. Question 59 (2 marks, Numerical answer) – A100-cm copper wire has10 V across it, electron density8.43 × 10²² cm⁻³ and resistivity1.67 × 10⁻⁶ Ω cm. Find average electron drift speed in cm/s, to…
  60. Question 60 (2 marks, Numerical answer) – A7-km aluminium line carries100 A with at most2 MW resistive loss. For conductivity3.77 × 10⁵ Ω⁻¹ cm⁻¹, find the minimum circular-wire diameter in mm,…
  61. Question 61 (2 marks, Numerical answer) – A copper plate’s electron cloud is displaced1.1 × 10⁻¹⁸ m relative to nuclei. Copper is FCC with a = 0.362 nm, Z = 29. Find electronic polarization…
  62. Question 62 (2 marks, Numerical answer) – For SO₂ + ½O₂⇌SO₃, ΔG° = − 94600 + 89.37T J/mol. Find Kp at 1050 K, to two decimals. Use R = 8.314 J K⁻¹ mol⁻¹.
  63. Question 63 (2 marks, Numerical answer) – At298 K and 1 atm, the reduction-potential-versus-pH slopes for NiO + 2H⁺ + 2e⁻⇌Ni + H₂O and 2H⁺ + 2e⁻⇌H₂ are S₁, S₂. Find S₁/S₂, to one decimal.
  64. Question 64 (2 marks, Numerical answer) – At873 K, hydrogen diffuses steadily through a5-mm palladium sheet of area0.3 m². Surface concentrations are3 and 0.5 kg/m³, and diffusivity1.8 × 10⁻⁸…
  65. Question 65 (2 marks, Numerical answer) – Iron dissolves as Fe²⁺ at corrosion-current density2 × 10⁻⁴ A/cm². Find corrosion penetration in mm/year, to one decimal. Use molar mass55.85 g/mol,…
  66. Question 66 (1 mark, Multiple choice) – An undamped mass m on a spring of stiffness k is displaced P from equilibrium at t = 0 and released with zero velocity. Which function gives its…
  67. Question 67 (1 mark, Multiple choice) – A ball of mass 5m approaches a stationary ball of mass m with a horizontal velocity of 2 m/s from left to right. After a perfectly elastic central…
  68. Question 68 (1 mark, Multiple choice) – The Mohr’s circle corresponding to an infinitesimal element is shown in the figure. The plane PQ in the infinitesimal element, at an angle of 𝜃 from…
  69. Question 69 (1 mark, Multiple choice) – The two-dimensional state of stress, in an infinitesimal element, is given by 𝜎𝑥𝑥 = 800 MPa, 𝜎𝑥𝑦 = 300 MPa and 𝜎𝑦𝑦 = 0 MPa. Which one of the…
  70. Question 70 (1 mark, Multiple choice) – P follows Q on a straight road with 60-m initial separation. P initially travels36 km/h and Q maintains18 km/h. P brakes with uniform deceleration;…
  71. Question 71 (1 mark, Multiple select) – The natural frequency of a spring-mass system is 10 rad/s. Which of the following statements is/are CORRECT?
  72. Question 72 (1 mark, Numerical answer) – A concentric hollow square beam section has outer side10 mm and uniform wall thickness1 mm. Find its area moment about the centroidal x-axis parallel…
  73. Question 73 (1 mark, Numerical answer) – For a certain linear elastic isotropic material, the Young’s modulus is 140 GPa and the shear modulus is 50 GPa. The Poisson’s ratio for the material…
  74. Question 74 (1 mark, Numerical answer) – A force of P = 100 N is applied at the ends of the pliers as shown in the figure. Neglecting friction, the force exerted by the upper jaw on the…
  75. Question 75 (2 marks, Multiple choice) – Consider two blocks, P of mass 100 kg and Q of mass 150 kg, resting as shown in the figure. The angle 𝜃 = 30°. The coefficient of friction between…
  76. Question 76 (2 marks, Multiple choice) – Which one of the following vertical columns, of circular cross-section, sustains the highest load without buckling?
  77. Question 77 (2 marks, Multiple choice) – Rod PQ rotates counter-clockwise about fixed hinge P at constant15 rad/s. Slider R is 0.5 m from P along its slot, with relative speed5 m/s and zero…
  78. Question 78 (2 marks, Multiple choice) – The frame shown in the figure is loaded at S with a force of 2000 N. The reactions at T are denoted by Tx and Ty, while the reaction at W is Wy.…
  79. Question 79 (2 marks, Multiple choice) – A closed thin cylindrical tank with a mean diameter d = 300 mm and thickness t = 2 mm, is subjected to a uniform internal gas pressure p. The…
  80. Question 80 (2 marks, Multiple select) – Square PQRS has sides parallel to x, y and diagonals PR, QS. Its infinitesimal strains are εxx = 500 × 10⁻⁶, εyy = 100 × 10⁻⁶, εxy = 0. Which listed…
  81. Question 81 (2 marks, Multiple select) – Across a rectangular beam section of height30 mm and depth10 mm, σxx = 200y + 500 N/mm², where y is mm from the centroidal axis. Stress is uniform…
  82. Question 82 (2 marks, Numerical answer) – A vertical column fixed at one end is subjected to a compressive axial load at the free end. The column’s section modulus, EI, is 9.82 × 105 Nm2 and…
  83. Question 83 (2 marks, Numerical answer) – A simply supported1-m beam has P = 150 kN at L/3 from its left end. Its strain energy is U=2P2L3/(243EI) and EI = 16.66 × 10⁵ N m². Find load-point…
  84. Question 84 (2 marks, Numerical answer) – A4-m simply supported beam has circular section diameter20 mm, A = 314.2 mm², I = 7854 mm⁴. A100-N transverse point load acts at midspan and a20-kN…
  85. Question 85 (2 marks, Numerical answer) – A massless cantilever beam, with a tip mass m of 10 kg, is modeled as an equivalent spring-mass system as shown in the figure. The beam is of length L…
  86. Question 86 (2 marks, Numerical answer) – An electric motor’s rotor is spinning at 1500 rpm when its load and power are cut- off. The rotor which has a mass of 50 kg and a radius of gyration…
  87. Question 87 (2 marks, Numerical answer) – A1-m bar fixed at one end has a0.1-mm gap between its free end and a rigid wall. Temperature rises uniformly10°C. Use α = 20 × 10⁻⁶ per°C and E = 100…
  88. Question 88 (1 mark, Multiple choice) – A tank is divided into two compartments with one compartment containing a gas at a given pressure, while the second is completely evacuated. If the…
  89. Question 89 (1 mark, Multiple choice) – A cylinder of volume 0.1 m3 is filled with nitrogen at 10 MPa and 300 K. Consider nitrogen to be an ideal gas. The cylinder develops a leak and…
  90. Question 90 (1 mark, Multiple choice) – A closed system undergoes a process 1–2 in which it absorbs 150 kJ of energy as heat and does 90 kJ of work. Then it follows another process 2–3 in…
  91. Question 91 (1 mark, Multiple choice) – The inlet and outlet temperatures of the flowing fluid during a steady state flow process are the same as that of the surroundings. If the changes in…
  92. Question 92 (1 mark, Multiple choice) – For specific-heat ratio γ, what is the air-standard Otto-cycle efficiency?
  93. Question 93 (1 mark, Multiple choice) – For a reversible refrigerator between absolute temperatures TH>TL, what is COP?
  94. Question 94 (1 mark, Numerical answer) – A tank of 4 m3 contains an ideal gas mixture of 60% hydrogen and 40% nitrogen by volume at 100 kPa and 300 K. Nitrogen is added to the tank such that…
  95. Question 95 (1 mark, Numerical answer) – A heat engine having thermal efficiency of 40% receives heat from a source at 600 K and rejects heat to a sink at 300 K. The second-law efficiency (in…
  96. Question 96 (1 mark, Numerical answer) – A rigid tank of 300 litre capacity contains 3 kg of oxygen (molar mass = 32 kg/kmol) at 25 °C. If oxygen behaves as an ideal gas, the pressure (in…
  97. Question 97 (2 marks, Multiple choice) – In an ideal gas-turbine cycle, T1 and T3 are compressor/turbine inlet absolute temperatures, t = T3/T1, and γ is specific-heat ratio. What pressure…
  98. Question 98 (2 marks, Multiple select) – For a pure substance that expands on freezing, which of the following statement (s) is/are CORRECT?
  99. Question 99 (2 marks, Multiple select) – Consider a gas obeying the relation P ( v − b ) = RT , where b and R are constants. Which of the following statement (s) is/are CORRECT about the…
  100. Question 100 (2 marks, Numerical answer) – A piston-cylinder arrangement contains an ideal gas mixture of 4 kg of hydrogen and 13 kg of nitrogen at 250 K and atmospheric pressure. On heat…
  101. Question 101 (2 marks, Numerical answer) – An ideal Diesel cycle compresses air from 3 L to 0.15 L, then adds heat at constant pressure until volume0.3 L. With γ = 1.4, find thermal efficiency…
  102. Question 102 (2 marks, Numerical answer) – Air at 101 kPa, 15 °C and 50% relative humidity is first heated to 20 °C in a heating coil, and then humidified by spraying water on it. In the final…
  103. Question 103 (2 marks, Numerical answer) – A stream of superheated steam (2 MPa, 300 °C) mixes with another stream of superheated steam (2 MPa, 400 °C) through a steady-state adiabatic process.…
  104. Question 104 (2 marks, Numerical answer) – A piston-cylinder assembly having 250 mm diameter contains 0.01 kg of water vapor at 1 MPa and 200 °C. The specific volume of the vapor is 0.20602…
  105. Question 105 (2 marks, Numerical answer) – Air enters a hair dryer at 22 °C and 100 kPa with a velocity of 3.7 m/s, and leaves the dryer at 83 °C and 100 kPa with a velocity of 9.1 m/s. The…
  106. Question 106 (2 marks, Numerical answer) – A steam boiler contains saturated water vapour at 200 °C. After a certain period, the temperature of the boiler drops to 110 °C. Assume that all the…
  107. Question 107 (2 marks, Numerical answer) – Carnot engines E1 and E2 operate in series:E1 receives heat at 1600 K and rejects to an intermediate reservoir T; E2 receives from T and rejects at…
  108. Question 108 (2 marks, Numerical answer) – A thermometer uses t = aeα + b in°C. Its thermometric property α is 6 at the ice point and 9 at the steam point. Find t for α = 7, to two decimals.
  109. Question 109 (2 marks, Numerical answer) – In a piston cylinder assembly, one kmol of an ideal gas is compressed from an initial state of 200 kPa and 400 K to a final state of 1 MPa and 400 K.…
  110. Question 110 (1 mark, Multiple choice) – Which one of the following measures of viscosity is dimensionless?
  111. Question 111 (1 mark, Multiple choice) – Which one of the following permits the direct determination of intrinsic viscosity of a polymer solution for known molecular weight of the polymer?
  112. Question 112 (1 mark, Multiple choice) – Under which combination of conditions does the glass transition of a polymer increase?
  113. Question 113 (1 mark, Multiple choice) – Polymer X is depolymerized by ethylene-glycol glycolysis with a catalyst to give the depicted product. Identify X.
  114. Question 114 (1 mark, Multiple choice) – Polymer “Z” has a high melting point and it decomposes even before it melts. Hence, it is usually dissolved and subsequently regenerated. Rayon is one…
  115. Question 115 (1 mark, Multiple choice) – Match products P rainboots, Q disposable plastic cups, R soft-drink bottles, S flexible films with 1 blow molding,2 calendering,3 rotational molding,4…
  116. Question 116 (1 mark, Multiple choice) – Crystallization is favored in polymer melts when the chain entanglement is and only polymers with molecular arrangement can crystallize.
  117. Question 117 (1 mark, Multiple choice) – Match P polyurethane, Q epoxy, R polyimide, S polyester with monomer pairs1 maleic acid + propylene glycol,2 pyromellitic anhydride + p,…
  118. Question 118 (1 mark, Multiple choice) – Thermoplastic Polyurethane and Polyamide 6 both contain amide linkages, but when compared to Polyurethane, Polyamide 6 shows higher melting point due…
  119. Question 119 (2 marks, Multiple choice) – Injection molding is typically used to make plastic parts. If the pressure at the gate is monitored as a function of time during the injection of a…
  120. Question 120 (2 marks, Multiple select) – For an unperturbed linear chain, the root-mean-square end-to-end distance scales as average segment length times√n, where n is segment count. Compared…
  121. Question 121 (2 marks, Multiple select) – Match extruder zones P feed, Q compression, R metering with functions1 melt acquires constant flow,2 no heating,3 melting from external heaters,4…
  122. Question 122 (2 marks, Multiple select) – During material testing, stress is applied from time ti to tf as shown below: The corresponding strain responses for three different materials are…
  123. Question 123 (2 marks, Multiple select) – Match P Hildebrand solubility parameter, Q loss modulus, R toughness, S flexural strength with units1 Pa,2 J m⁻³,3 MPa½,4 kg m⁻¹ s⁻². Which offered…
  124. Question 124 (2 marks, Multiple select) – Match P antioxidant, Q flame retardant, R plasticizer, S colorant with 1 phthalocyanine,2 di(2-ethylhexyl) phthalate,3 tricresyl phosphate,4 phenyl…
  125. Question 125 (2 marks, Multiple select) – Copolymerization reactivity ratios (r₁, r₂) are I:(0.1,10), II:(0.003,0.02), III:(3.4,5.6), IV:(51,0.01). Which offered case/type identifications are…
  126. Question 126 (2 marks, Multiple select) – For a miscible blend with one crystallizable component, match conditions P amorphous-component Tg below crystalline-component Tg, Q amorphous Tg above…
  127. Question 127 (2 marks, Numerical answer) – The heat of polymerization of ethylene is 25 Kcal/mol. The amount of heat generated during the polymerization of 5.6 Kg polyethylene is Kcal. (Round…
  128. Question 128 (2 marks, Numerical answer) – The density of an amorphous polymer is 0.77 g cm-3 and that of its crystalline counterpart is 0.99 g cm-3. The density of a semi-crystalline sample of…
  129. Question 129 (2 marks, Numerical answer) – Titration was used to determine the molar mass of two linear monodisperse polymers A and B. Both the polymers possess the same repeat unit and contain…
  130. Question 130 (2 marks, Numerical answer) – A unidirectional composite of a resin is prepared with continuous fibers, wherein the volume fraction of the fiber in the composite is 0.7. Assume…
  131. Question 131 (2 marks, Numerical answer) – A rubber contains 70 wt% butadiene (molar mass = 54 g/mol), 20 wt% isoprene (molar mass = 68 g/mol), 5 wt% sulfur and 5 wt% carbon black. Assume that…
  132. Question 132 (1 mark, Multiple choice) – Which of the following contains the phytonutrient allicin?
  133. Question 133 (1 mark, Multiple choice) – Which mold is responsible for the characteristic blue marbling in blue-veined cheese?
  134. Question 134 (1 mark, Multiple choice) – Which genus of bacteria does NOT have cell wall?
  135. Question 135 (1 mark, Multiple choice) – Which pigment does NOT have provitamin-A activity?
  136. Question 136 (1 mark, Multiple choice) – Identify the analysis that must be performed FIRST to judge ‘cleanliness’ of spice/herb powders.
  137. Question 137 (1 mark, Multiple choice) – If there is a delay in oil extraction after bran is separated from the brown rice, the quality of rice bran oil deteriorates. Identify the suitable…
  138. Question 138 (1 mark, Multiple select) – Among the following, which is/are the process (es) that lead to generation of new fats from existing ones?
  139. Question 139 (1 mark, Numerical answer) – The true density and bulk density of wheat grains are 1280 kg/m3 and 740 kg/m3, respectively. The porosity of the grains is . (rounded off to 2…
  140. Question 140 (1 mark, Numerical answer) – Potato slices weighing50 kg are dried from 60% moisture on wet basis to 5% moisture on dry basis. Find dried-product mass in kg, as an integer.
  141. Question 141 (2 marks, Multiple choice) – Identify the gas composition (in percent) suitable for packaging cured meat under MAP conditions.
  142. Question 142 (2 marks, Multiple choice) – Which sequence describes egg-white gel formation? PN = native protein, PD = denatured protein, PA = aggregated protein, PG = gel. Δ denotes heating…
  143. Question 143 (2 marks, Multiple choice) – In canning and retorting of foods, which of the following is the correct expression of Ball process time (B)? Assume: tp = processor’s process time;…
  144. Question 144 (2 marks, Multiple choice) – Which of the following is the most suitable flexible packaging laminate for dry fruits?
  145. Question 145 (2 marks, Multiple choice) – Identify the CORRECT sequence of operations for dressing of poultry.
  146. Question 146 (2 marks, Multiple select) – Which of the following statement (s) is/are TRUE for a package of gamma- irradiated (7.5 kGy) whole chicken?
  147. Question 147 (2 marks, Multiple select) – Match products P idli, Q parboiled rice, R soda beverage, S cookies with processes 1 baking, 2 fermentation, 3 gelatinization, 4 carbonation.
  148. Question 148 (2 marks, Multiple select) – Which of the following is/are inhibitor (s) of enzymatic browning in peeled potatoes?
  149. Question 149 (2 marks, Multiple select) – Match enzymes P β-glucanase, Q α- and β-amylases, R pectinase, S papain with 1 fruit-juice clarification, 2 bread making, 3 meat tenderization, 4…
  150. Question 150 (2 marks, Numerical answer) – A microorganism with z = 11°C requires F 121=2.4 min for99.9999% inactivation. Find the F value for12D inactivation at 143°C, in minutes to three…
  151. Question 151 (2 marks, Numerical answer) – Use constant specific heats over0–50°C:water4.48, water vapour1.88, and dry air1.0 kJ kg⁻¹ K⁻¹. Vaporizing1 kg water at 0°C requires2000 kJ. Find…
  152. Question 152 (2 marks, Numerical answer) – An ultrafiltration tube concentrates juice from 6% to 20% total solids by mass. Feed rate is 10 kg/min, tube inside diameter10 cm, pressure…
  153. Question 153 (2 marks, Numerical answer) – In a typical grinding operation, 80% of the feed material passes through a sieve opening of 4.75 mm; whereas, 80% of the ground product passes through…
  154. Question 154 (1 mark, Multiple choice) – During which of the following times of the day is the 2 m air temperature usually the lowest at a tropical location?
  155. Question 155 (1 mark, Multiple choice) – At which of the following locations in the atmosphere is the anvil of a towering cumulonimbus cloud usually located?
  156. Question 156 (1 mark, Multiple choice) – Which one of the following is the main reason why tropical cyclones rarely form over the Bay of Bengal during the summer monsoon season?
  157. Question 157 (1 mark, Multiple choice) – Which one of the following is the main cause of the land-sea temperature contrast that drives phenomena like sea breeze and the Indian summer monsoon?
  158. Question 158 (1 mark, Multiple choice) – The directions of the South Pacific Subtropical Gyre and the North Atlantic Subtropical Gyre are and , respectively.
  159. Question 159 (1 mark, Multiple choice) – The time period of the inertial oscillation at a location R is 1.5 times that of a particle moving at a speed of 0.5 m s-1 at a location S (87 °E, 45…
  160. Question 160 (1 mark, Multiple select) – Which of the following Period (s) correspond (s) to wind waves?
  161. Question 161 (1 mark, Numerical answer) – Accumulated rainfall is often measured in mm. If the density of rain water is 1000 kg m-3 then, one mm of rain is equal to kg m-2 of rain. (in…
  162. Question 162 (1 mark, Numerical answer) – A water parcel at 67°E,20°N moves at 0.35 m s⁻¹. Find the magnitude of its Coriolis acceleration as a coefficient of 10⁻⁵ m s⁻², to two decimals. Use…
  163. Question 163 (2 marks, Multiple choice) – A rotating weather system has a tangential velocity of 100 m s-1, diameter of 1 km, and located at a latitude where the Coriolis parameter is 10 − 4…
  164. Question 164 (2 marks, Multiple choice) – The sea surface height concentric isolines (L1 and L2 in cm) and the distance between them (dx in km) for three different eddies at the same latitude…
  165. Question 165 (2 marks, Multiple choice) – The vertical (depth) profiles for three parameters P1, P2, and P3 in the northern Indian Ocean are given in the figure below. The values along the…
  166. Question 166 (2 marks, Multiple choice) – The zonal gradient of meridional current and the meridional gradient of zonal current is − 0.3 × 10 − 3 s-1 and 0.3 × 10 − 3 s-1, respectively, at a…
  167. Question 167 (2 marks, Multiple choice) – The north-Atlantic deep-water is associated with .
  168. Question 168 (2 marks, Multiple choice) – For density and three-dimensional velocity v, which equations give compressible mass continuity? i: t+( v)=0; ii: t+( v)=0; iii: t v+ v=0; iv: t+ v=0.
  169. Question 169 (2 marks, Multiple select) – In the figures given below, L and H indicate low and high pressure centers, respectively; PGF, CoF and CeF indicate Pressure Gradient Force, Coriolis…
  170. Question 170 (2 marks, Numerical answer) – One kg of dry air at 15 °C is isothermally compressed to one-tenth of its initial volume. The work done on the system is kJ. (Round off to the nearest…
  171. Question 171 (2 marks, Numerical answer) – Sweat evaporation cools a human body by 1°C. What evaporated-water mass is required as a percentage of body mass, to two decimals? Use latent heat2.25…
  172. Question 172 (2 marks, Numerical answer) – A floating hot air balloon with volume 1000 m3 and gross mass (excluding the air in the balloon) 100 kg is in hydrostatic balance where the external…
  173. Question 173 (2 marks, Numerical answer) – The solar constant for the Earth is 1368 W m-2. Consider the planet Jupiter whose mass is 320 times that of the Earth and distance from the Sun is 5.2…
  174. Question 174 (2 marks, Numerical answer) – A column of air mass extending from surface to a height of 10 km moving eastward along 30 °N strikes a north-south oriented mountain range. While…
  175. Question 175 (2 marks, Numerical answer) – At P, sea surface temperature is 28°C, air temperature35°C and 10-m wind speed4 m s⁻¹. At Q, the respective values are30°C,32°C and 7 m s⁻¹. Air…