GATE 2018 MT – Previous Year Questions with Solutions
All 65 questions of GATE 2018 MT with answers and explanations. Read each question, then practise it by topic or as a full paper.
65 questions worth 100 marks in all (30 1-mark, 35 2-mark). Subjects covered: Engineering Mathematics (20), General Aptitude (10), Mechanical Behaviour of Materials (7), Physical Metallurgy (7), Transport Phenomena and Rate Processes (6), Metallurgical Thermodynamics (5), Materials Science and Non-Metallic Materials (4), Manufacturing Processes (4).
Practise this paper in The GATE Grind →
- Question 1 – For a laminar flow of a liquid metal over a flat plate, the thicknesses of the velocity and thermal boundary layers are 𝛿𝑣 and 𝛿𝑡 respectively.…
- Question 1 – “When she fell down the , she received many but little help.” The words that best fill the blanks in the above sentence are
- Question 2 – “In spite of being warned repeatedly, he failed to correct his behaviour.” The word that best fills the blank in the above sentence is
- Question 2 – What is the most-abundant anion in a 2CaO.SiO2 melt?
- Question 3 – Analysis of a flow phenomenon in a system requires the following variables: i. Pressure [M L−1 T −2] ii. Velocity of the fluid [L T −1] iii. Size of…
- Question 3 – For 0 ≤𝑥≤2𝜋, sin 𝑥 and cos 𝑥 are both decreasing functions in the interval .
- Question 4 – The area of an equilateral triangle is √3. What is the perimeter of the triangle?
- Question 4 – In froth flotation, the primary purpose of adding collectors is to:
- Question 5 – Arrange the following in the correct sequence of operations in an integrated steel plant: i. Basic Oxygen Furnace (BOF) ii. Blast Furnace (BF) iii.…
- Question 5 – Arrange the following three-dimensional objects in the descending order of their volumes: (i) A cuboid with dimensions 10 cm, 8 cm and 6 cm (ii) A…
- Question 6 – An automobile travels from city A to city B and returns to city A by the same route. The speed of the vehicle during the onward and return journeys…
- Question 6 – During decarburization in a steel bath at 1550 oC, the compositions of dissolved C (wt.%C) and dissolved O (wt.%O) follow the relation: (wt.%C)(wt.%O)…
- Question 7 – During upset forging, and considering friction, which of the following profiles represents the axial compressive stress? Note: In these profiles, the…
- Question 7 – A set of 4 parallel lines intersect with another set of 5 parallel lines. How many parallelograms are formed?
- Question 8 – To pass a test, a candidate needs to answer at least 2 out of 3 questions correctly. A total of 6,30,000 candidates appeared for the test. Question A…
- Question 8 – Consider the following engineering components: P. Gas turbine blades Q. Tungsten-based heavy alloy penetrators R. Self-lubricating bearings S. Engine…
- Question 9 – If 𝑥2 + 𝑥−1 = 0 what is the value of 𝑥4 + 1 𝑥4?
- Question 9 – Which of the following materials are protected by passivation (i.e., formation of a thin adherent film on the surface) from corrosion? P. Aluminium…
- Question 10 – In a detailed study of annual crow births in India, it was found that there was relatively no growth during the period 2002 to 2004 and a sudden spike…
- Question 10 – The c/a ratio of Zn (hcp) is 1.856. Slip at room temperature occurs most easily on which of the following slip systems in Zn: Note: In hcp metals, the…
- Question 11 – At equilibrium, the maximum number of phases in a three-component system at CONSTANT PRESSURE is:
- Question 12 – For a single phase system with K components, the exact differential of Gibbs free energy is given as : 𝑑𝐺= −𝑆𝑑𝑇+ 𝑉𝑑𝑃+ ∑𝜇𝑖𝑑𝑛𝑖 𝐾 𝑖=1…
- Question 13 – For intrinsic Si at room temperature, the electron concentration = the hole concentration = 1 × 1016m−3, and the electron and hole mobilities are 0.1…
- Question 14 – To minimize refractory loss during BOF steel-making, slag is supersaturated with which of the following:
- Question 15 – Which of the following welding processes is NOT suitable for joining thin metal sheets?
- Question 16 – Which of the following categories of materials is suitable as a filler for brazing of steel sheets?
- Question 17 – Arrange the following processes in INCREASING magnitude of surface roughness of the casting. P. Investment casting Q. Permanent mould casting R.…
- Question 18 – In a Jominy end-quench test of the eutectoid plain-carbon steel, which of the following represents the sequence of microstructures observed from the…
- Question 19 – A long oil pipeline made of steel is suspected to have developed a scale on the inner surface due to corrosion. Which of the following non-destructive…
- Question 20 – A steel is plastically worked in the temperature range below the nose of the TTT curve and above Ms, followed by quenching to produce fine martensite.…
- Question 21 – What is the requirement for equilibrium at a triple junction as shown in the schematic, with γ₁₂ , γ₂₃ and γ₁₃ as grain boundary tensions and θ₁ , θ₂…
- Question 22 – In the A-rich end of the A-B binary eutectic phase diagram (shown below), the solidus and liquidus are straight lines. The freezing range of the alloy…
- Question 23 – A vector field is given as follows: 𝑓⃗= (−𝑥2𝑦+ 𝑥𝑦2) 𝑖̂ + (𝑥2𝑦) 𝑗̂ The divergence of this field evaluated at (𝑥, 𝑦) = (2, 2) is .
- Question 24 – A plate of thickness h = 120 mm is cold rolled in a mill with a roll diameter of 200 mm. If the coefficient of friction µ is 0.1, the maximum possible…
- Question 25 – A copper-aluminium diffusion couple develops a certain concentration profile after an isothermal treatment at 600°C for 10 hours. The time required to…
- Question 26 – The molar free energy (J mol−1) of a liquid solution of a binary A-B alloy as a function of temperature ( T ) and composition (x, the mole fraction of…
- Question 27 – Determine the correctness (or otherwise) of the following Assertion [A] and the Reason [R] Assertion [A]: For a material exhibiting Coble creep, a…
- Question 28 – Determine the correctness (or otherwise) of the following Assertion [A] and the Reason [R] Assertion [A]: Refractory BCC metals like W and Mo are less…
- Question 29 – A glass fibre of 5 micron diameter is subjected to a tensile stress of 20 MPa. The surface energy and elastic modulus of this material are 0.3 Jm−2…
- Question 30 – Two equal and opposite point charges + Q and − Q are located as shown in the figure above. A surface integral, 𝐹𝑖 is defined on surface 𝑆𝑖 of a…
- Question 31 – Match the four tensile stress-strain curves (P,Q, R, S) with the materials listed in the box:
- Question 32 – Match the metal in Group 1 with the appropriate extractive process in Group 2 Group 1 Group 2 P. Fe 1. Metallothermic Reduction Q. Ni 2. Carbothermic…
- Question 33 – Fe is produced in a reactor using pure Fe2O3, C and O2. For every mole of Fe produced, 2.38 moles of C is used. The exit gas from the reactor contains…
- Question 34 – What is the voltage required to electrolytically refine impure copper of activity 𝑎𝐶𝑢= 0.9 (Raoultian standard state) to pure copper at 300 K…
- Question 35 – Consider the following Ordinary Differential Equation: 𝑑 𝑑𝑥[𝑐𝑑𝑐 𝑑𝑥] = 0 In a domain 0 ≤𝑥≤𝑡, with boundary conditions 𝑐(0) = 0.5 and 𝑐(𝑡)…
- Question 36 – Match the manufacturing processes in Group 1, with the types of cracks in Group 2: Group 1 Group 2 P. Arc welding 1. Edge crack Q. Extrusion 2.…
- Question 37 – Consider a dilute substitutional solid solution of X in a metal A. The powder diffraction pattern of this alloy reveals that all the peaks have…
- Question 38 – A classroom of 20 students can be categorized on the basis of blood-types: 5 students each with “A”, “B”, “AB”, and “O” blood-types. If four students…
- Question 39 – If the solid-liquid interfacial energy increases by 10%, the energy barrier for homogeneous nucleation of a spherical solid from the liquid, will…
- Question 40 – Consider the following stress state imposed on a material: 𝜎= [ 90 50 0 50 −20 0 0 0 140 ] MPa. If the material responds elastically with a…
- Question 41 – A continuous and aligned carbon-fiber composite consists of 25 vol. % of fibers in an epoxy matrix. The Young’s modulus of fiber and matrix,…
- Question 42 – Pure iron transforms from body centered cubic (BCC) to face centered cubic (FCC) crystal structure at 912 °C. If the lattice parameter of the BCC…
- Question 43 – As shown in schematic below, an alloy is cast as a rectangular slab between two thick mould walls that differ in their thermal conductivities.…
- Question 44 – The temperature profile (T in Kelvin) of an arc weld across its width is given as 𝑇= 2000 exp(−0.3𝑥2) where 𝑥 (in mm) is the distance from the weld…
- Question 45 – The terminal velocity (𝑣) of a spherical inclusion of diameter D = 50 micrometers rising in liquid steel is (in mm s−1 to two decimal places) Assume…
- Question 46 – A single crystal of aluminium is subjected to 10 MPa tensile stress along the [321] crystallographic direction. The resolved shear stress on the…
- Question 47 – If the net magnetic moment of an Fe atom in BCC structure is 2 𝜇𝐵, then the saturation magnetization of Fe is (kA m−1 to one decimal place) Given:…
- Question 48 – If 2 moles of Au and 3 moles of Ag are mixed to form a single-phase ideal solid solution, the total entropy of mixing is (on J K−1 to one decimal…
- Question 49 – A spherical liquid metal droplet of diameter 1 mm is solidified in a stream of gas at 300 K. Assuming that the metal droplet remains at its melting…
- Question 50 – At a temperature of 710 K, the vapour pressure of pure liquid Zn is given by: 𝑝𝑍𝑛(𝑋𝑧𝑛= 1.0) = 3.6 × 10−4atm. The Raoultian activity coefficient…
- Question 51 – For the reaction: 4Ag(s, pure) + O2(g) ⟶2Ag2O(s, pure), the standard enthalpy change, ∆𝐻0 = − 61080 J, and the standard entropy change, ∆𝑆0 = −…
- Question 52 – In a powder diffraction experiment on BCC iron, the first peak occurs at 2𝜃 = 68.7°. The wavelength of X-rays is (in nm to three decimal places).…
- Question 53 – A 1 mol piece of copper at 400 K is brought in contact with another 1 mol piece of copper at 300 K, and allowed to reach thermal equilibrium. The…
- Question 54 – Using the trapezoidal rule with two equal intervals (n = 2, Δ𝑥= 1), the definite integral ∫ 1 ln (𝑥) 4 2 𝑑𝑥= (to two decimal places).
- Question 55 – The ideal plastic work involved in extruding a cylindrical billet of length 100 mm, from an initial diameter of 20 mm to a final diameter of 16 mm is…