GATE 2026 XE — all source sections – Question 131
A single-screw extruder runs at 12 rpm with open discharge and no die. Screw diameter is 10 cm, distance between adjacent flights 2.5 cm, screw-to-barrel gap 0.25 cm and helix angle 8° to the plane normal to the screw axis. Assume isothermal Newtonian incompressible flow in the metering zone. Find volumetric flow in cm³/min, rounded to an integer.
Practise this question in The GATE Grind →
Show answer and explanation
Correct answer: 110 to 120
Explanation
With open discharge, neglect the pressure-flow contribution and use the drag-flow approximation. Taking the stated flight spacing as the channel width W, Q≈(1/2)πDNWH cosφ. Substitution gives Q≈0.5π×10×12×2.5×0.25×cos8°=116.66… cm³/min, or 117. Source qualification: interpreting the spacing as an axial pitch adds another cosine projection, giving approximately 115.53 and rounding to 116; the supplied pitch/diameter/angle are not mutually exact for an ideal helix. Both conventional approximations lie in the official 110–120 interval.