GATE Polymer Science and Engineering (XE5): Polymer Processing – Previous Year Questions
13 GATE previous year questions on Polymer Processing (Polymer Science and Engineering (XE5), Engineering Sciences) with answers and explanations, from every paper.
13 questions worth 21 marks in all (5 1-mark, 8 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q120 – Match each processing technique in Column A to the product in Column B. Column A: P, blow molding; Q, rotational molding; R, injection molding; S,…
- GATE 2020 XE — all source sections Q129 – A molten polymer with bulk modulus 1 GPa is pressurized to 200 MPa during injection molding. The fractional decrease in its volume, rounded to one…
- GATE 2019 XE — all source sections Q118 – A polystyrene coffee cup can be most economically manufactured by
- GATE 2019 XE — all source sections Q131 – A single-screw extruder is used to manufacture a nylon rod of 0.5 cm diameter at a production rate of 2.5 cm s-1. The densities of solid nylon and…
- GATE 2023 XE — all source sections Q114 – Match extruder zones P metering, Q compression, R feed, S working with 1 high-shear mixing,2 receives feed,3 melts feed from heater-conducted heat,4…
- GATE 2023 XE — all source sections Q119 – From the options given, identify the correct match (es) between the polymer products with the most appropriate processing technique. Polymer product…
- GATE 2023 XE — all source sections Q128 – A polymeric material of density 0.9 g/cc and melt volume of 10 cc in an extruder has a residence time of 100 s. The output of the extruder is kg/h.…
- GATE 2024 XE — all source sections Q116 – Thermoforming operation of semi-crystalline polymers with glass transition temperature, 𝑇𝑔, and melting temperature, 𝑇𝑚, is carried out at a…
- GATE 2025 XE — all source sections Q115 – Match products P rainboots, Q disposable plastic cups, R soft-drink bottles, S flexible films with 1 blow molding,2 calendering,3 rotational molding,4…
- GATE 2025 XE — all source sections Q119 – Injection molding is typically used to make plastic parts. If the pressure at the gate is monitored as a function of time during the injection of a…
- GATE 2025 XE — all source sections Q121 – Match extruder zones P feed, Q compression, R metering with functions1 melt acquires constant flow,2 no heating,3 melting from external heaters,4…
- GATE 2026 XE — all source sections Q115 – Match products P fibre-reinforced pressure vessel, Q overhead water tank, R medicine blister package and S plastic carry bag with I rotomoulding, II…
- GATE 2026 XE — all source sections Q131 – A single-screw extruder runs at 12 rpm with open discharge and no die. Screw diameter is 10 cm, distance between adjacent flights 2.5 cm,…