An independent four-jaw chuck sets the disc off-center so the intended hole center aligns with the spindle. A drill then generates the hole. A self-centering three-jaw chuck cannot provide that eccentric setting, and a single-point tool is not required for the specified drilling. **B,C**.
More Machine Tools questions
GATE 2023 PI Q38– Match P: collet; Q: dividing head; R: lead screw, with 1: indexing; 2: thread cutting; 3:…
GATE 2022 PI Q30– A lathe cuts a single-start 2 mm pitch thread using a single-start lead screw of pitch 4…
GATE 2021 PI Q20– Which mechanism does NOT transform rotary motion to translation in machine tools?
GATE 2021 PI Q57– A shaper removes the top layer of a 750 × 300 mm plate in one depth of cut, with 750 mm…
GATE 2025 PI Q31– A lathe has a single-start lead screw of 6 mm pitch. It cuts a double-start thread of 3 mm…
GATE 2024 PI Q18– For simple indexing with a dividing head on a horizontal mill, select crank movement that…
