GATE Polymer Science and Engineering (XE5): Polymer Rheology – Previous Year Questions
13 GATE previous year questions on Polymer Rheology (Polymer Science and Engineering (XE5), Engineering Sciences) with answers and explanations, from every paper.
13 questions worth 23 marks in all (3 1-mark, 10 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q123 – The plot shows shear stress versus shear rate for several fluids. The appropriate assignment of P, Q, R, and S is
- GATE 2020 XE — all source sections Q128 – A polymer solution flows through a cylindrical tube of diameter 4 mm at volumetric flow rate 10-9 m3/s. Assuming laminar Newtonian flow and viscosity…
- GATE 2019 XE — all source sections Q128 – A 3 mm thick layer of softened poly(methyl methacrylate) at 190 C is sandwiched between two flat parallel plates. A shear stress of 100 kPa is…
- GATE 2023 XE — all source sections Q111 – A copper wire upon loading instantaneously increases in length to l, and then continues to elongate gradually. Upon unloading, the wire retracts to…
- GATE 2023 XE — all source sections Q123 – Match P rubbery regime, Q around Tg, R deformed sample with statements1 stress relaxation dissipates excess free energy,2 long-range molecular…
- GATE 2023 XE — all source sections Q126 – A nylon sample of 0.03 m2 cross-sectional area is subjected to a creep load of 10 kN. The load is removed after a duration of 60 s. Young’s modulus…
- GATE 2024 XE — all source sections Q115 – The ‘die swell’ phenomenon exhibited by a polymer melt is due to
- GATE 2024 XE — all source sections Q129 – Carreau viscosity is = 0[1+()2](n-1)/2 with positive parameters. Raising shear rate from 1 to 100 s⁻¹ lowers viscosity tenfold. Given n = 0.4 and η0 =…
- GATE 2024 XE — all source sections Q131 – The linear viscoelastic behaviour of a polymer is described by the Kelvin-Voigt model consisting of a spring element of elastic modulus 10 MPa in…
- GATE 2025 XE — all source sections Q122 – During material testing, stress is applied from time ti to tf as shown below: The corresponding strain responses for three different materials are…
- GATE 2026 XE — all source sections Q114 – Which is NOT a rotational rheometer?
- GATE 2026 XE — all source sections Q123 – The upper plot shows steady shear viscosity η versus shear rate on logarithmic axes, with γ̇s the upper applied shear rate. Which lower curve P, Q, R,…
- GATE 2026 XE — all source sections Q130 – A Maxwell-model polymer is suddenly held at constant strain 0.3. Its elastic modulus is 5 MPa and relaxation time is 200 days. Find stress after 100…