GATE Power Electronics: Voltage and Current commutated Thyristor based converters – Previous Year Questions
6 GATE previous year questions on Voltage and Current commutated Thyristor based converters (Power Electronics, Electrical Engineering) with answers and explanations, from every paper.
6 questions worth 11 marks in all (1 1-mark, 5 2-mark). Asked between 2014 and 2023, so you can see how the topic has been tested over time.
- GATE 2016 EE (EE2) Q55 – A lossless full bridge supplies the shown RLE load with firing angle 120°. Supply is v m(t)=200(100 t) V, R=20 Ω and E=800 V with the indicated…
- GATE 2014 EE (EE1) Q63 – The rectifier shown feeds series R = 10 Ω and L = 0.05 H. With ideal thyristor and diode, find firing angle (degrees) for average load voltage 70 V.
- GATE 2019 EE Q65 – A single-phase fully-controlled thyristor converter is used to obtain an average voltage of 180 V with 10 A constant current to feed a DC load. It is…
- GATE 2020 EE Q22 – Thyristor T 1 is triggered at an angle (in degree), and T 2 at angle 180+, in each cycle of the sinusoidal input voltage. Assume both thyristors to be…
- GATE 2020 EE Q61 – A single-phase, full-bridge, fully controlled thyristor rectifier feeds a load comprising a 10\ resistance in series with a very large inductance. The…
- GATE 2023 EE Q55 – The circuit shown in the figure has reached steady state with thyristor ‘T’ in OFF condition. Assume that the latching and holding currents of the…