GATE Mechanics of Materials: Transformation of stress and strain, Mohr circle – Previous Year Questions
10 GATE previous year questions on Transformation of stress and strain, Mohr circle (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.
10 questions worth 14 marks in all (6 1-mark, 4 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q18 – The stress state in Figure (a) is represented in the coordinate system of Figure (b). The components ( xx, yy, xy) are .
- GATE 2018 ME (ME1) Q16 – For algebraically largest and smallest principal stresses 1, 3, maximum shear stress is .
- GATE 2018 ME (ME1) Q39 – The plane-stress state shown has σx = 100 kPa and τxy = 50 kPa. If the minimum principal stress is 10 kPa, σy is .
- GATE 2018 ME (ME1) Q41 – Two cylindrical wooden logs are bonded at the θ = 30° interface shown. Glue fails if normal stress exceeds 2.5 MPa (criterion 1) or shear stress…
- GATE 2019 ME (ME2) Q31 – A point’s stress state has a Mohr circle of radius 100 MPa centered at 200 MPa on the normal-stress axis. On a plane through the point, normal stress…
- GATE 2020 ME (ME1) Q17 – The stress state at a point under plane stress is equibiaxial tension of magnitude 10 MPa. If one unit on the σ–τ plane represents 1 MPa, its Mohr…
- GATE 2022 ME (ME2) Q38 – A linear elastic structure under plane stress condition is subjected to two sets of loading, I and II. The resulting states of stress at a point…
- GATE 2023 ME Q27 – Which of the plot(s) shown is/are valid Mohr's circle representations of a plane stress state in a material? (The center of each circle is indicated…
- GATE 2025 ME Q28 – A metallic square plate is subjected to a uniform hydrostatic pressure (P). Choose the correct Mohr's circle representing the state of stress at any…
- GATE 2026 ME Q52 – A welded square plate of 1 m 1 m is subjected to biaxial stress of magnitude 6.5 MPa and 25 MPa, as shown in the figure below. The ratio of the normal…