GATE Mechanics of Materials: Bending and shear stresses, shear centre – Previous Year Questions
10 GATE previous year questions on Bending and shear stresses, shear centre (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.
10 questions worth 17 marks in all (3 1-mark, 7 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q17 – The cross-sections of two solid bars made of the same material are shown in the figure. The square cross-section has flexural (bending) rigidity I1,…
- GATE 2016 ME (ME1) Q43 – The figure shows a beam cross section subjected to bending. Its area moment of inertia about its base is mm⁴. All dimensions in the figure are in mm.
- GATE 2016 ME (ME1) Q44 – A simply-supported beam of length 3L is subjected to the loading shown in the figure. It is given that P = 1 N, L = 1 m and Young’s modulus E = 200…
- GATE 2018 ME (ME1) Q49 – A simply supported beam is 100 mm wide, 200 mm high and 4 m long, carrying a 10 kN/m UDL. Maximum bending stress, to one decimal, is MPa.
- GATE 2019 ME (ME2) Q32 – A circular wire of diameter 1.0 mm is bent into a circular arc of radius 1.0 m by pure end bending moments. Young’s modulus is 100 GPa. Find maximum…
- GATE 2019 ME (ME1) Q49 – An elastic straight beam of length 10π m has square cross-section of side 5 mm and E = 200 GPa. It is bent so the ends meet, forming a circle of mean…
- GATE 2021 ME (ME1) Q61 – An overhanging beam PQR is subjected to uniformly distributed load 20 kN/m as shown in the figure. The maximum bending stress developed in the beam is…
- GATE 2023 ME Q24 – A beam is undergoing pure bending as shown in the figure. The stress ()-strain () curve for the material is also given. The yield stress of the…
- GATE 2023 ME Q58 – The area moment of inertia about the y-axis of a linearly tapered section shown in the figure is m4. (Answer in integer)
- GATE 2026 ME Q49 – A simply supported beam is subjected to an external point load P as shown in the figure below. The beam has a rectangular cross-section of 20 mm 45…