GATE Mechanics of Materials: Torsion of circular shafts – Previous Year Questions
8 GATE previous year questions on Torsion of circular shafts (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.
8 questions worth 13 marks in all (3 1-mark, 5 2-mark). Asked between 2016 and 2023, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q44 – Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length and polar moment of inertia. Both are subjected to…
- GATE 2016 ME (ME2) Q17 – A shaft with a circular cross-section is subjected to pure twisting moment. The ratio of the maximum shear stress to the largest principal stress is
- GATE 2016 ME (ME2) Q42 – A rigid horizontal rod of length 2L is fixed to a circular cylinder of radius R as shown in the figure. Vertical forces of magnitude P are applied at…
- GATE 2016 ME (ME1) Q18 – Two hollow bars of the same material have concentric circular cross sections as shown, with r 3>r 1, r 4>r 2 and equal cross-sectional areas. Their…
- GATE 2018 ME (ME2) Q41 – A circular bar is clamped at P and Q. A torque T = 150 N·m acts 100 mm from P, with another 200 mm to Q. Find torsional reactions (TP, TQ) at the ends…
- GATE 2019 ME (ME1) Q30 – A cylindrical rod 10 mm in diameter and 1.0 m long is fixed at one end. A torque twists the other by 10°. Its maximum shear strain is p10-3. Find p,…
- GATE 2022 ME (ME2) Q50 – A shaft of length L is made of two materials, one in the inner core and the other in the outer rim, and the two are perfectly joined together (no slip…
- GATE 2023 ME Q60 – A cylindrical transmission shaft of length 1.5 m and diameter 100 mm is made of a linear elastic material with a shear modulus of 80 GPa. While…