GATE Mechanics of Materials: Euler theory of columns – Previous Year Questions
8 GATE previous year questions on Euler theory of columns (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.
8 questions worth 12 marks in all (4 1-mark, 4 2-mark). Asked between 2017 and 2022, so you can see how the topic has been tested over time.
- GATE 2017 ME (ME1) Q49 – An initially stress-free massless elastic beam has length L and circular diameter d L, with both ends fixed between rigid walls. Material constants…
- GATE 2018 ME (ME2) Q15 – Find the minimum axial compressive load initiating buckling of a pinned–pinned slender column of bending stiffness EI and length L.
- GATE 2018 ME (ME1) Q29 – A 15 mm × 10 mm rectangular steel column is 1.5 m long and simply supported at both ends. With E = 200 GPa, critical axial load, to two decimals, is…
- GATE 2019 ME (ME1) Q50 – The prismatic beam shown is pinned at both ends, length π m, square side 6 mm, E = 200 GPa and =310-6\ K-1. Find minimum uniform temperature rise…
- GATE 2020 ME (ME2) Q48 – The uniaxial compression test graph is for a 1 m long solid metal bar. Response is linear from O to yield point P and nonlinear beyond P. The rod is…
- GATE 2020 ME (ME1) Q40 – The truss has four members of length l and flexural rigidity EI, and one member of length l2 and rigidity 4EI. It carries the pair of outward forces P…
- GATE 2021 ME (ME2) Q34 – A column with one end fixed and one end free has a critical buckling load of 100 N. For the same column, if the free end is replaced with a pinned end…
- GATE 2022 ME (ME1) Q16 – A uniform light slender beam AB of section modulus EI is pinned by a frictionless joint A to the ground and supported by a light inextensible cable CB…