GATE Theory of Machines: Flywheels and governors – Previous Year Questions
6 GATE previous year questions on Flywheels and governors (Theory of Machines, Mechanical Engineering) with answers and explanations, from every paper.
6 questions worth 8 marks in all (4 1-mark, 2 2-mark). Asked between 2020 and 2024, so you can see how the topic has been tested over time.
- GATE 2020 ME (ME2) Q49 – The flywheel turning-moment diagram is shown for a fictitious engine. Mean turning moment is 2000 N·m and average speed is 1000 rpm. For speed…
- GATE 2020 ME (ME1) Q30 – A flywheel keeps an engine’s rotational speed between 100 and 110 rad/s. Energy fluctuation between these speeds is 1.05 kJ. Find its moment of…
- GATE 2021 ME (ME2) Q26 – The controlling force curves P, Q and R for a spring controlled governor are shown in the figure, where r 1 and r 2 are any two radii of rotation.
- GATE 2021 ME (ME2) Q64 – The torque provided by an engine is given by T=12000+2500(2) N.m, where is the angle turned by the crank from inner dead center. The mean speed of the…
- GATE 2022 ME (ME1) Q17 – The figure shows a schematic of a simple Watt governor mechanism with the spindle O 1O 2 rotating at an angular velocity about a vertical axis. The…
- GATE 2024 ME Q23 – The change in kinetic energy E of an engine is 300 J, and minimum and maximum shaft speeds are min = 220 rad/s and max = 280 rad/s, respectively.…