The GATE Grind

GATE Machine Design: Design for static and dynamic loading, failure theories – Previous Year Questions

10 GATE previous year questions on Design for static and dynamic loading, failure theories (Machine Design, Mechanical Engineering) with answers and explanations, from every paper.

10 questions worth 15 marks in all (5 1-mark, 5 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2016 ME (ME2) Q21 (1 mark, Multiple choice) – A machine element XY, fixed at end X, is subjected to an axial load P, transverse load F, and a twisting moment T at its free end Y. The most critical…
  2. GATE 2016 ME (ME1) Q48 (2 marks, Multiple choice) – The principal stresses at a point inside a solid object are σ1 = 100 MPa, σ2 = 100 MPa and σ3 = 0 MPa. The yield strength of the material is 200 MPa.…
  3. GATE 2017 ME (ME2) Q47 (2 marks, Multiple choice) – Principal stresses are 60, 5 and −40 MPa. Tensile yield strength is 200 MPa. The maximum-shear-stress factor of safety is .
  4. GATE 2019 ME (ME1) Q52 (2 marks, Numerical answer) – At a component point, xx=100 MPa, yy=220 MPa and xy= yx=80 MPa; all other stress components are zero. Yield strength is 468 MPa. Find safety factor by…
  5. GATE 2020 ME (ME1) Q38 (2 marks, Multiple choice) – Bars of square and circular cross-section, each 0.5 m long, are made of material of shear strength 20 MPa. The square section is 4 cm × 4 cm; the…
  6. GATE 2021 ME (ME2) Q27 (1 mark, Multiple choice) – The von Mises stress at a point in a body subjected to forces is proportional to the square root of the
  7. GATE 2022 ME (ME2) Q18 (1 mark, Multiple choice) – A structural member under loading has a uniform state of plane stress which in usual notations is given by x=3P, y=-2P and xy=2P, where P>0. The yield…
  8. GATE 2023 ME Q26 (1 mark, Multiple select) – The principal stresses at a point P in a solid are 70 MPa, −70 MPa and 0. The yield stress of the material is 100 MPa. Which prediction(s) about…
  9. GATE 2024 ME Q56 (2 marks, Numerical answer) – A solid massless cylindrical member of 50 mm diameter is rigidly attached at one end, and is subjected to an axial force P = 100 kN and a torque T =…
  10. GATE 2026 ME Q34 (1 mark, Numerical answer) – A steel plate having yield strength of 550 MPa, is subjected to biaxial state of stress as x = and y = -2. Using distortion energy theory and…