GATE Machine Design: Brakes and clutches – Previous Year Questions
7 GATE previous year questions on Brakes and clutches (Machine Design, Mechanical Engineering) with answers and explanations, from every paper.
7 questions worth 13 marks in all (1 1-mark, 6 2-mark). Asked between 2016 and 2024, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME2) Q22 – For the brake shown in the figure, which one of the following is TRUE?
- GATE 2018 ME (ME1) Q63 – The clockwise external drum shown engages a short shoe at Y on rigid lever XYZ, hinged at X. A 100 N force acts at Z as shown. With friction…
- GATE 2019 ME (ME2) Q52 – The shown short-shoe external drum brake has drum diameter 500 mm and dimensions a = 1000 mm, b = 500 mm, c = 200 mm. Friction coefficient is 0.35.…
- GATE 2019 ME (ME1) Q54 – The shown single-block short-shoe brake has torque capacity 250 N·m. Its cylindrical drum rotates anticlockwise at 100 rpm; friction coefficient is…
- GATE 2020 ME (ME1) Q47 – A disc-type axial clutch has annular contact with outer and inner diameters 250 and 50 mm. A new clutch needs axial force F₁ to transmit a torque; the…
- GATE 2021 ME (ME1) Q63 – A short shoe drum (radius 260 mm) brake is shown in the figure. A force of 1 kN is applied to the lever. The coefficient of friction is 0.4. The…
- GATE 2024 ME Q59 – A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of 1.5 kN. The maximum braking force (F) that…