GATE Fluid Mechanics: Flow through pipes, head losses, bends and fittings – Previous Year Questions
5 GATE previous year questions on Flow through pipes, head losses, bends and fittings (Fluid Mechanics, Mechanical Engineering) with answers and explanations, from every paper.
5 questions worth 9 marks in all (1 1-mark, 4 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q49 – Consider a fully developed steady laminar flow of an incompressible fluid with viscosity µ through a circular pipe of radius R. Given that the…
- GATE 2019 ME (ME2) Q53 – Water flows through equal-circular-section pipes A and B of lengths 1.0 and 2.0 m respectively. Both flows are laminar and fully developed. Their…
- GATE 2020 ME (ME2) Q59 – Water of density 1000 kg/m³ flows in an inclined constant-diameter pipe. At A, speed = 3.2 m/s, pressure = 186 kPa and elevation = 24.5 m; at B, speed…
- GATE 2024 ME Q37 – In the pipe network shown in the figure, all pipes have the same cross-section and can be assumed to have the same friction factor. The pipes…
- GATE 2026 ME Q24 – A steady incompressible laminar flow passes through a 90° tube bend placed on a horizontal surface. In horizontal diametric plane, two pressure taps P…