GATE Heat Transfer: Unsteady conduction and lumped parameter systems – Previous Year Questions
8 GATE previous year questions on Unsteady conduction and lumped parameter systems (Heat Transfer, Mechanical Engineering) with answers and explanations, from every paper.
8 questions worth 14 marks in all (2 1-mark, 6 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q53 – A cylindrical steel rod, 0.01 m in diameter and 0.2 m in length is first heated to 750 oC and then immersed in a water bath at 100 oC. The heat…
- GATE 2016 ME (ME2) Q53 – Two cylindrical shafts A and B, initially at the same temperature, are put into a furnace simultaneously. Their surfaces immediately remain at the…
- GATE 2016 ME (ME1) Q52 – A steel ball of 10 mm diameter at 1000 K is required to be cooled to 350 K by immersing it in a water environment at 300 K. The convective heat…
- GATE 2017 ME (ME2) Q57 – A 60 mm metal ball initially at 220°C is cooled by an air jet at 20°C with h = 200 W/m² K. Its specific heat, conductivity and density are 400 J/kg K,…
- GATE 2020 ME (ME1) Q44 – A metal bead of radius 0.5 mm, initially at 100°C, attains 28°C in 4.35 s when placed in fluid at 20°C. Metal density is 8500 kg/m³ and specific heat…
- GATE 2021 ME (ME1) Q23 – A hot steel spherical ball is suddenly dipped into a low temperature oil bath. Which of the following dimensionless parameters are required to…
- GATE 2023 ME Q47 – A very large metal plate of thickness d and thermal conductivity k is cooled by a stream of air at temperature T = 300 K with a heat transfer…
- GATE 2026 ME Q35 – A sphere of radius 5 mm is initially in equilibrium at 400 °C in a furnace. It is suddenly removed from the furnace and dipped in a well-stirred water…