GATE Thermal Engineering Applications: Turbomachinery: turbines, compressors, pumps – Previous Year Questions
15 GATE previous year questions on Turbomachinery: turbines, compressors, pumps (Thermal Engineering Applications, Mechanical Engineering) with answers and explanations, from every paper.
15 questions worth 24 marks in all (6 1-mark, 9 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q29 – The blade and fluid velocities for an axial turbine are as shown in the figure. The magnitude of absolute velocity at entry is 300 m/s at an angle of…
- GATE 2016 ME (ME1) Q28 – Consider two hydraulic turbines having identical specific speed and effective head at the inlet. If the speed ratio (N1/N2) of the two turbines is 2,…
- GATE 2018 ME (ME2) Q21 – Select the correct statement for a 50% reaction stage in a steam turbine.
- GATE 2018 ME (ME2) Q55 – A one-fifth-scale Francis turbine model is tested at head 2 m, volume flow 1 m³/s and 450 rpm. Take water density 10³ kg/m³ and g = 10 m/s². Assume no…
- GATE 2018 ME (ME1) Q34 – For a given Pelton-wheel water-jet speed, bucket-speed/jet-speed ratio for maximum output power, to two decimals, is .
- GATE 2019 ME (ME2) Q58 – An idealized centrifugal pump has blade outer radius 50 mm, consumes 2 kW and runs at 3000 rpm. Liquid enters axially and exits radially with respect…
- GATE 2019 ME (ME1) Q20 – Order the hydraulic turbines by descending flow rate under common design practice.
- GATE 2019 ME (ME1) Q60 – An air turbine has isentropic efficiency 0.70 at pressure ratio 3. The ratio increases to 5 with inlet conditions and actual specific work unchanged.…
- GATE 2020 ME (ME2) Q28 – In a hydraulic turbomachine stage, h₁ is enthalpy at stator inlet, h₂ at stator outlet (rotor inlet), and h₃ at rotor outlet. If h₂ − h₁ = h₃ − h₂,…
- GATE 2020 ME (ME1) Q61 – Ideal-gas air enters a perfectly insulated compressor at 310 K. Compressor pressure ratio is 6. Air has constant cₚ = 1005 J/(kg·K) and cₚ/cᵥ = 1.4.…
- GATE 2020 ME (ME1) Q64 – The outlet blade velocity diagram for a Kaplan axial-flow turbine is shown. The section diameter is 3 m; hub and tip diameters are 2 and 4 m. Water…
- GATE 2021 ME (ME2) Q59 – A vertical shaft Francis turbine rotates at 300 rpm. The available head at the inlet to the turbine is 200 m. The tip speed of the rotor is 40 m/s.…
- GATE 2021 ME (ME1) Q58 – A single jet Pelton wheel operates at 300 rpm. The mean diameter of the wheel is 2 m. Operating head and dimensions of jet are such that water comes…
- GATE 2025 ME Q53 – Consider a Pelton wheel of 1 m diameter. The magnitude of relative velocity of water at the bucket inlet is same as the magnitude of relative velocity…
- GATE 2026 ME Q58 – An inward flow reaction turbine, having an outer diameter of 1 m, runs at 600 RPM. The normal component of absolute velocity at the inlet is 10 m/s.…