Home › Previous year questions › GATE 2020 AG › Question 14GATE 2020 AG – Question 14 Farm Power · Tractors and Power Tillers · 1 mark · Multiple choice
The angle made by the kingpin axis projected on a tractor’s longitudinal plane with the vertical is called
Kingpin inclination Caster angle Camber angle Steering angle Practise this question in The GATE Grind →
Show answer and explanation Correct answer: (B) Caster angle
Explanation Caster is the fore-and-aft inclination of the steering axis seen in the longitudinal plane. Kingpin inclination is the corresponding front-view inclination; camber describes wheel tilt. Therefore B matches the specified projection.
More Tractors and Power Tillers questions GATE 2020 AG Q16 – A self-propelled wheel does not have GATE 2020 AG Q27 – A tractor operator experiences sound pressure level 80 dB. Reference pressure is 2×10⁻⁵… GATE 2020 AG Q28 – A towed pneumatic wheel has unloaded radius 330 mm and travels 9.9 m in five revolutions… GATE 2020 AG Q51 – A two-wheel-drive tractor weighs25 kN, wheelbase2.2 m, CG0.7 m ahead of rear axle. A… GATE 2026 AG Q19 – A 2WD tractor has driving-axle dynamic normal load 28 kN, rolling radius 0.60 m, total… GATE 2026 AG Q20 – RMS sound pressure increases by 50%. Approximately how much does sound-pressure level… All Tractors and Power Tillers questions →