The GATE Grind

GATE 2023 XE — all source sections – Question 36

Fluid Mechanics (XE1) · Integral Analysis for a Control Volume · 2 marks · Numerical answer

A water jet (density = 1000 kg/m3) is approaching a vertical plate, having an orifice at the center, as shown in the figure. While a part of the jet passes through the orifice, remainder flows along the plate. Neglect friction and assume both the inlet and exit jets to have circular cross-sections. If V = 5 m/s, 𝐷 = 100 mm and 𝑑 = 25 mm, magnitude of the horizontal force (in N, rounded off to one decimal place) required to hold the plate in its position is ___________.

Practise this question in The GATE Grind →

Show answer and explanation

Correct answer: 183.0 to 185.0

Explanation

The portion passing through the hole retains horizontal momentum, and only the intercepted annular area loses that component. Force = ρV²π(D² − d²)/4. With D = 0.100, d = 0.025 m, V = 5 m/s, this gives 184.08 N, rounded184.1 N. Using the full jet area would overestimate the plate force.

More Integral Analysis for a Control Volume questions

All Integral Analysis for a Control Volume questions →