The GATE Grind

GATE 2023 XE — all source sections – Previous Year Questions with Solutions

All 175 questions of GATE 2023 XE — all source sections with answers and explanations. Read each question, then practise it by topic or as a full paper.

175 questions worth 275 marks in all (75 1-mark, 100 2-mark). Subjects covered: Fluid Mechanics (XE1) (22), Materials Science (XE2) (22), Solid Mechanics (XE3) (22), Thermodynamics (XE4) (22), Polymer Science and Engineering (XE5) (22), Food Technology (XE6) (22), Atmospheric and Oceanic Sciences (XE7) (22), Engineering Mathematics (XE0) (11).

Practise this paper in The GATE Grind →

  1. Question 1 (1 mark, Multiple choice) – The village was nestled in a green spot, the ocean and the hills.
  2. Question 2 (1 mark, Multiple choice) – Disagree : Protest : : Agree : (By word meaning)
  3. Question 3 (1 mark, Multiple choice) – A ‘frabjous’ number is defined as a 3 digit number with all digits odd, and no two adjacent digits being the same. For example, 137 is a frabjous…
  4. Question 4 (1 mark, Multiple choice) – Which one among the following statements must be TRUE about the mean and the median of the scores of all candidates appearing for GATE 2023?
  5. Question 5 (1 mark, Multiple choice) – In the given diagram, ovals are marked at different heights (h) of a hill. Which one of the following options P, Q, R, and S depicts the top view of…
  6. Question 6 (2 marks, MTA) – Residency is a famous housing complex with many well-established individuals among its residents. A recent survey conducted among the residents of the…
  7. Question 7 (2 marks, Multiple choice) – Ankita climbs five stairs from the ground. Each move is one or two stairs upward, and she cannot move down. Let F(N) count the ways to reach stair N;…
  8. Question 8 (2 marks, Multiple choice) – The information contained in DNA is used to synthesize proteins that are necessary for the functioning of life. DNA is composed of four nucleotides:…
  9. Question 9 (2 marks, Multiple choice) – Which of the figures P, Q, R, S represents f(x)= x+2 - x-1 ?
  10. Question 10 (2 marks, Multiple choice) – An opaque cylinder (shown below) is suspended in the path of a parallel beam of light, such that its shadow is cast on a screen oriented perpendicular…
  11. Question 11 (1 mark, Multiple choice) – Let 𝐴 be a 3 × 3 real matrix having eigenvalues 1, 2, and 3. If 𝐵 = 𝐴2 + 2𝐴 + 𝐼, where 𝐼 is the 3 × 3 identity matrix, then the eigenvalues of…
  12. Question 12 (1 mark, Multiple choice) – Let f(x,y)=xy/( x +y) when y- x , and f = 0 otherwise. Which statement is true?
  13. Question 13 (1 mark, Multiple choice) – The quadrature -11 f(x)dx[c 1f(-1)+c 2f(1/2)+c 3f(1)]/9 is exact through degree2. Which relation is correct?
  14. Question 14 (1 mark, Multiple choice) – Find the second smallest eigenvalue of y+(-3)y=0, with y(0) = y(π) = 0.
  15. Question 15 (1 mark, Multiple choice) – Which complex function is differentiable at z = 0 but at no other point?
  16. Question 16 (1 mark, Numerical answer) – P(x) = a0 + a1x + a2x(x − 1) + a3x(x − 1)(x − 2) interpolates (0,2),(1,3),(2,2),(3,5). Find P(5/2), to two decimals.
  17. Question 17 (1 mark, Numerical answer) – Find integer m for which F=(4xmy2-2xym) i+(2x4y-3x2y2) j is conservative.
  18. Question 18 (2 marks, Multiple choice) – P=pmatrix4&-2&2\\6&-3&4\\3&-2&3pmatrix and Q=pmatrix3&-2&2\\4&-4&6\\2&-3&5pmatrix. Both have eigenvalues1,1,2. Which diagonalizability statement is…
  19. Question 19 (2 marks, Multiple choice) – Find the surface area of z=x2+y2 between z = 0 and z = 1/4.
  20. Question 20 (2 marks, Numerical answer) – A person tells the truth with probability4/6. They throw an unbiased die twice and report that the outcomes are equal. Find the probability they…
  21. Question 21 (2 marks, Numerical answer) – For u t-u xx=0 on0<x<2, t>0, with u(0, t) = u(2, t) = 0 and u(x,0) = sin (πx), find integer e2[u(1/2,1)-u(3/2,1)].
  22. Question 22 (1 mark, Multiple choice) – Match the following measuring instruments with the appropriate figures. I – Pitot probe II – Pitot-static probe III – Piezometer
  23. Question 23 (1 mark, Multiple choice) – Among the following non-dimensional numbers, which one characterizes periodicity present in a transient flow?
  24. Question 24 (1 mark, Multiple choice) – For an incompressible flat-plate boundary layer with streamwise speed u and freestream U∞, which expression is momentum thickness?
  25. Question 25 (1 mark, Multiple choice) – Among the shear stress versus shear strain rate curves shown in the figure, which one corresponds to a shear thinning fluid?
  26. Question 26 (1 mark, Multiple choice) – Consider steady incompressible flow over a flat plate, where the dashed line represents the edge of the boundary layer, as shown in the figure. Which…
  27. Question 27 (1 mark, Multiple choice) – Combine uniform flow U∞ along positive x with a clockwise vortex of strength K at the origin. In polar coordinates, which velocity potential matches…
  28. Question 28 (1 mark, Multiple choice) – Which of the following statements are true? (i) Conservation of mass for an unsteady incompressible flow can be represented as ∇⋅𝑉⃗⃗ = 0, where 𝑉⃗⃗…
  29. Question 29 (1 mark, Multiple choice) – For a two-dimensional flow field given as 𝑉⃗⃗ = − 𝑥𝑖̂ + 𝑦𝑗̂, a streamline passes through points (2, 1) and (5, p). The value of p is
  30. Question 30 (1 mark, Multiple select) – A stationary object is fully submerged in a static fluid, as shown in the figure. Here, CG and CB stand for center of gravity and center of buoyancy,…
  31. Question 31 (2 marks, Multiple choice) – Steady fully developed incompressible Newtonian flow lies between infinite plates at y = 0, H moving oppositely with speeds U2, U1. There is no…
  32. Question 32 (2 marks, Multiple choice) – For steady incompressible Newtonian flow V=Axy i+By2 j, with viscosityµ and no body force, find pressure-gradient vector at(5,0).
  33. Question 33 (2 marks, Multiple choice) – For two-dimensional potential-flow velocity V = ui + vj, what is the slope dy/dx of an equipotential line?
  34. Question 34 (2 marks, Multiple choice) – In steady incompressible Newtonian laminar flow over a horizontal flat plate with uniform freestream, how does boundary-layer thickness scale with x?
  35. Question 35 (2 marks, Multiple select) – Which streamfunction definitions identically satisfy steady two-dimensional compressible continuity?
  36. Question 36 (2 marks, Numerical answer) – A water jet (density = 1000 kg/m3) is approaching a vertical plate, having an orifice at the center, as shown in the figure. While a part of the jet…
  37. Question 37 (2 marks, Numerical answer) – Water (density = 1000 kg/m3) and alcohol (specific gravity = 0.7) enter a Y-shaped channel at flow rates of 0.2 m3/s and 0.3 m3/s, respectively. Their…
  38. Question 38 (2 marks, Numerical answer) – The velocity and acceleration of a fluid particle are given as 𝑉⃗⃗ = ( − 𝑖̂ + 2𝑗̂) m/s and 𝑎⃗ = ( − 2𝑖̂ − 4𝑗̂) m/s2, respectively. The magnitude…
  39. Question 39 (2 marks, Numerical answer) – A hydraulic turbine with rotor diameter of 100 mm produces 200 W of power while rotating at 300 rpm. Another dynamically-similar turbine rotates at a…
  40. Question 40 (2 marks, Numerical answer) – Water (density = 1000 kg/m3) flows steadily with a flow rate of 0.05 m3/s through a venturimeter having throat diameter of 100 mm. If the pipe…
  41. Question 41 (2 marks, Numerical answer) – A thin plate of length0.25 m, width2 m has water flowing parallel over both faces at U∞ = 1 m/s. Useρ = 1000 kg/m³, µ = 0.001 Pa s, linear profile…
  42. Question 42 (2 marks, Numerical answer) – For axisymmetric tube flow,u(r)/U=(1-r/R)1/n, where U is centreline speed. Find area-average-speed ratio V/U for n = 1, to two decimals.
  43. Question 43 (2 marks, Numerical answer) – A stationary circular pipe of radius 𝑅 = 0.5 m is half filled with water (density = 1000 kg/m3), whereas the upper half is filled with air at…
  44. Question 44 (1 mark, Multiple choice) – In age-hardening of an aluminium alloy, the purpose of solution treatment followed by quenching is to
  45. Question 45 (1 mark, Multiple choice) – Which depicted magnetization M versus applied-field H hysteresis loop is most suitable for a permanent magnet?
  46. Question 46 (1 mark, Multiple choice) – A semiconductor has a band gap of approximately2 eV. Which absorption-versus-photon-energy graph is correct?
  47. Question 47 (1 mark, Multiple choice) – Figures i and ii show a binary phase diagram and a Gibbs-energy/composition diagram. Which marked temperature T1–T4 corresponds to ii?
  48. Question 48 (1 mark, Multiple choice) – Aliovalent MgCl₂ doping in NaCl creates defects. Which source defect-reaction expression is correct?
  49. Question 49 (1 mark, Multiple select) – An FCC screw dislocation has Burgers vector a[110]/2. Which listed slip planes can contain it?
  50. Question 50 (1 mark, Numerical answer) – The tensile true stress (𝜎) – true strain (𝜖) curve follows the Hollomon equation: 𝜎 = 500𝜖0.15 MPa 𝑑𝜎 At the maximum load, the work-hardening…
  51. Question 51 (1 mark, Numerical answer) – A metal has a certain vacancy fraction at a temperature of 600 K. On increasing the temperature to 900 K, the vacancy fraction increases by a factor…
  52. Question 52 (1 mark, Numerical answer) – A semiconductor has electron/hole mobility ratio10, electron density10¹⁵ m⁻³, hole density10¹⁶ m⁻³ and conductivity1.6 S/m. Using e = 1.6 × 10⁻¹⁹ C,…
  53. Question 53 (2 marks, Multiple choice) – A student performed X-ray diffraction experiment on a FCC polycrystalline pure metal. The following 𝑠𝑖𝑛2 𝜃 values were calculated from the…
  54. Question 54 (2 marks, Multiple choice) – Match depicted P–S with 1:(111),2:[112],3:[221],4:(110).
  55. Question 55 (2 marks, Multiple choice) – Match hardness tests P Brinell, Q Rockwell, R Vickers with 1 diamond pyramid,2 diamond cone,3 tungsten-carbide sphere,4 steel sphere.
  56. Question 56 (2 marks, Multiple choice) – Using the eutectoid-steel TTT diagram, match heat-treatment paths P, Q, R with 1 bainite only,2 pearlite only,3 pearlite + bainite + martensite,4…
  57. Question 57 (2 marks, Multiple select) – Which of the following statement (s) is/are true for an optical microscope?
  58. Question 58 (2 marks, Multiple select) – Among the 14 Bravais lattices, there is no base centred cubic unit cell. Which of the following statement (s) is/are true?
  59. Question 59 (2 marks, Multiple select) – For the shown Cv/T-versus-T² plot, which material/type statements are true?
  60. Question 60 (2 marks, Numerical answer) – A pure Silicon wafer is doped with Boron by exposing it to B2O3 vapour at an elevated temperature. It takes 1000 seconds to reach a Boron…
  61. Question 61 (2 marks, Numerical answer) – The Young’s modulus of a quartz piezoelectric crystal is 100 GPa. The uniaxial stress required to change its polarization by 1% is (give absolute…
  62. Question 62 (2 marks, Numerical answer) – A1D nanowire has linear electron density10⁸ cm⁻¹. Find Fermi energy in eV, to two decimals, using 2/(2m)=0.24 (eV)² s² kg⁻¹. Use the spin-degenerate…
  63. Question 63 (2 marks, Numerical answer) – Two moles of monatomic ideal gas expand reversibly and isothermally at 300 K from 10 to 2 atm. Find work magnitude in kJ, to two decimals. Use R =…
  64. Question 64 (2 marks, Numerical answer) – For Zn(s) + 2H⁺→H₂ + Zn²⁺, Ecell = + 0.690 V at 298 K and H₂ pressure1 atm. Given RT/F = 0.0256 V, standard Zn²⁺/Zn reduction potential − 0.762 V and…
  65. Question 65 (2 marks, Numerical answer) – In a Raman spectroscopy experiment done at 300 K, a Raman line is observed at 200 𝑐𝑚 − 1 (~25 𝑚𝑒𝑉). The ratio of the intensity of the Stokes line…
  66. Question 66 (1 mark, Multiple choice) – A plane truss is simply supported at P and R as shown. A downward force F is applied at hinge Q. The axial force developed in member PS is
  67. Question 67 (1 mark, Multiple choice) – A massless rod of length L pivots frictionlessly at O and carries a point mass m at P. Released from rest horizontally, it swings downward under…
  68. Question 68 (1 mark, Multiple choice) – Two equivalent descriptions of the state of stress at a point are shown in the figure. The normal stresses 𝜎1 and 𝜎2 as shown on the right must be,…
  69. Question 69 (1 mark, Multiple choice) – At a point, εxx = 2.5 × 10⁻⁴, εyy = 2.0 × 10⁻⁴, εzz = − 1.5 × 10⁻⁴, εxy = 2.5 × 10⁻⁴, εyz = − 0.5 × 10⁻⁴, εzx = − 1.0 × 10⁻⁴. Find volumetric strain.
  70. Question 70 (1 mark, Multiple choice) – A closed thin cylindrical vessel has inside diameter d, wall thickness t and internal pressure p. Find hoop stressσ1 and longitudinal stressσ2.
  71. Question 71 (1 mark, Multiple select) – A4-kg mass hangs from a vertical spring of stiffness100 N/m. For g = 9.81 m/s², find static extension and oscillation period.
  72. Question 72 (1 mark, Numerical answer) – A rod is subjected to three forces as shown in the figure on the left. An equivalent force system with forces F1, F2 and moment M is shown in the…
  73. Question 73 (1 mark, Numerical answer) – A simply supported beam of length 3 m is loaded as shown in the figure. The magnitude of the shear force (in kN) at the mid-point of the beam is…
  74. Question 74 (1 mark, Numerical answer) – For a plane stress problem, the principal stresses are 100 MPa and 50 MPa. The magnitude of maximum shear stress (in MPa) in the material is (rounded…
  75. Question 75 (2 marks, Multiple choice) – A uniform disk (mass m, radius R) rolls at centre speed v and strikes a step of height3R/20. During impact it neither rebounds nor slips at the corner…
  76. Question 76 (2 marks, Multiple choice) – A rubber cylinder of length L, diameter d fits snugly in a rigid frictionless container. Its top receives small uniform axial pressure p. With Young’s…
  77. Question 77 (2 marks, Multiple choice) – The state of stress at the critical location in a structure is 𝜎𝑥𝑥 = 420 MPa, 𝜎𝑦𝑦 = 100 MPa, 𝜎𝑧𝑧 = 𝜎𝑥𝑦 = 𝜎𝑦𝑧 = 𝜎𝑧𝑥 = 0. The yield…
  78. Question 78 (2 marks, Multiple choice) – The figure shows a column of rectangular cross section 100 mm × 80 mm. It carries a load of 60 kN at a point 30 mm from the edge 𝑃𝑄. The values of…
  79. Question 79 (2 marks, Multiple choice) – Consider an electric pole with dimensions as shown in the figure. Let the end R be subjected to a vertical force F. The flexural rigidity of both…
  80. Question 80 (2 marks, Multiple select) – A cantilever of length L and rigidity EI has downward free-end force F and clockwise free-end moment M = 2FL, which reinforce downward deflection.…
  81. Question 81 (2 marks, Numerical answer) – A10-kg ball hangs in an accelerating carriage from two strings each60° to the horizontal. Right tension is twice left tension. With g = 10 m/s², find…
  82. Question 82 (2 marks, Numerical answer) – A10-kg block on a30° incline is held by force F directed up and parallel to the plane. Static friction coefficient is 0.3 and g = 10 m/s². Find…
  83. Question 83 (2 marks, Numerical answer) – A10-kg ball approaches a frictionless rigid wall at 2 m/s, making60° with the wall. Restitution coefficient is 0.9. Find rebound angleα measured from…
  84. Question 84 (2 marks, Numerical answer) – A thin steel plate under plane stress hasσxx = 120 MPa and unknownσyy. E = 200 GPa, ν = 0.3, and measuredεzz = − 3 × 10⁻⁴. Findσyy in MPa, to one…
  85. Question 85 (2 marks, Numerical answer) – A composite rod made of steel and copper is fixed immovably at its ends as shown in the figure. The length of each portion of the rod is 1 m as shown.…
  86. Question 86 (2 marks, Numerical answer) – A slender uniform elastic rod of length 1 m and of solid circular cross-section of diameter 50 mm is originally straight. It is then loaded by equal…
  87. Question 87 (2 marks, Numerical answer) – Consider a solid cylindrical shaft and a hollow cylindrical shaft. Both shafts are axisymmetric and elastic, and have the same cross-sectional area.…
  88. Question 88 (1 mark, Multiple choice) – A The number of properties required to fix the state of a system is given by ‘state postulate’. R The state of a simple compressible system is…
  89. Question 89 (1 mark, Multiple choice) – Which of the following is an extensive property of a system?
  90. Question 90 (1 mark, Multiple choice) – An ideal-gas mixture contains nA mol A and nB mol B at total P, V, T. Which partial-pressure pair is correct?
  91. Question 91 (1 mark, Multiple choice) – If an ideal air-standard Otto cycle and an ideal air-standard Diesel cycle operate on the same compression ratio, then the relation between the…
  92. Question 92 (1 mark, Multiple choice) – The following statements are given: (i) The third law of thermodynamics deals with the entropy of a substance at the absolute zero temperature. (ii)…
  93. Question 93 (1 mark, Multiple choice) – Which expression defines adiabatic bulk modulus?
  94. Question 94 (1 mark, Numerical answer) – An insulated rigid closed tank of 2 m3 internal volume contains saturated liquid- vapor mixture of water at 200 ℃. The quality of the mixture is 0.75.…
  95. Question 95 (1 mark, Numerical answer) – A rigid closed tank contains 2 kg of an ideal gas at 500 kPa and 350 K. A valve is opened, and half of the mass of the gas is allowed to escape. Then…
  96. Question 96 (1 mark, Numerical answer) – Air is heated at 200 kPa from 400 to 600 K. Its molar cv(T) = a + bT + cT² in kJ/(kmol K), with a = 19.686, b = 0.002, c = 0.5 × 10⁻⁵ in corresponding…
  97. Question 97 (2 marks, Multiple choice) – A rigid2-m³ closed tank initially contains0.1 m³ saturated liquid and 1.9 m³ saturated vapour at 100 kPa. It is heated to 2 MPa. At100 kPa: vf =…
  98. Question 98 (2 marks, Multiple choice) – An ideal Diesel cycle has a compression ratio of 20 and cut-off ratio of 1.5. At the beginning of the compression stroke, air is at 100 kPa, 300 K.…
  99. Question 99 (2 marks, Multiple choice) – A 5 kg metal block (cp = 0.5 kJ/kg-K) at 373 K is submerged into 10 kg of water (cp = 4.2 kJ/kg-K) at 293 K in an insulated rigid container without…
  100. Question 100 (2 marks, Multiple choice) – Match A1 Helmholtz function, A2 Gibbs function, A3 T–ds equation, A4 Clausius–Clapeyron with B1:d( P sat)/dT=h fg/(RT2), B2:u − Ts, B3:du = Tds − Pdv,…
  101. Question 101 (2 marks, Numerical answer) – A piston-cylinder device initially contains 1 m3 of air at 200 kPa and 25 ℃. Air expands at constant pressure while a heater of 250 W is switched on…
  102. Question 102 (2 marks, Numerical answer) – Steam at 2 MPa and 300 ℃ steadily enters a nozzle of inlet diameter of 20 cm. Steam leaves the nozzle with a velocity of 300 m/s. The mass flow rate…
  103. Question 103 (2 marks, Numerical answer) – A rigid tank of 2 m3 internal volume contains 5 kg of water as a saturated liquid-vapor mixture at 400 kPa. Half of the mass of the saturated liquid…
  104. Question 104 (2 marks, Numerical answer) – Consider a spark ignition engine which operates on an ideal air-standard Otto cycle. It uses a fuel which produces 44 MJ/kg of heat in the engine. If…
  105. Question 105 (2 marks, Numerical answer) – A refrigerator operates on an ideal vapor compression cycle between the pressure limits of 140 kPa and 800 kPa. The working fluid is the refrigerant…
  106. Question 106 (2 marks, Numerical answer) – A steam power plant operates on a simple ideal Rankine cycle. The condenser pressure is 10 kPa and the boiler pressure is 5 MPa. The steam enters the…
  107. Question 107 (2 marks, Numerical answer) – In an air-conditioning system, air enters at 20 ℃ and 30% relative humidity at a steady rate of 30 m3/min in a humidifier and it is conditioned to 25…
  108. Question 108 (2 marks, Numerical answer) – An office uses a heat pump to receive 500 kJ/day heat in winter to maintain its temperature at 300 K. The ambient temperature is 280 K. If the COP of…
  109. Question 109 (2 marks, Numerical answer) – At100°C, the saturated-water liquid–vapour slope is 3750 Pa/K and vg − vf = 1.672 m³/kg. Find latent enthalpy hfg in kJ/kg, as an integer.
  110. Question 110 (1 mark, Multiple choice) – Which one of the monomers given is used in the synthesis of cellulose?
  111. Question 111 (1 mark, Multiple choice) – A copper wire upon loading instantaneously increases in length to l, and then continues to elongate gradually. Upon unloading, the wire retracts to…
  112. Question 112 (1 mark, Multiple choice) – Identify the monomers that synthesize the depicted crosslinked polymer.
  113. Question 113 (1 mark, Multiple choice) – Among the options given, choose the most suitable compatibilizer for blending Polyvinylidene fluoride (PVDF) and Acrylonitrile butadiene styrene…
  114. Question 114 (1 mark, Multiple choice) – Match extruder zones P metering, Q compression, R feed, S working with 1 high-shear mixing,2 receives feed,3 melts feed from heater-conducted heat,4…
  115. Question 115 (1 mark, Multiple choice) – Polymer wetting is improved by the addition of fillers with functional groups. In a typical case-study, natural-clay was modified with hydroxyl groups…
  116. Question 116 (1 mark, Multiple choice) – Match P HDPE, Q poly (vinylcarbazole), R PMMA, S polycarbonate with Tg ranges1 above200°C,2 145–155°C,3 − 100 to − 80°C,4 90–100°C.
  117. Question 117 (1 mark, Multiple choice) – For P atactic polypropylene, Q syndiotactic polystyrene, R Nylon6, S PET, select the source’s decreasing-crystallinity order.
  118. Question 118 (1 mark, Multiple choice) – Choose the correct option that best correlates the graphs with the polymerization methods.
  119. Question 119 (2 marks, Multiple select) – From the options given, identify the correct match (es) between the polymer products with the most appropriate processing technique. Polymer product…
  120. Question 120 (2 marks, Multiple select) – Among the options given, which agents are used to vulcanize or cure rubbers?
  121. Question 121 (2 marks, Multiple select) – Lipase is a natural enzyme, which cleaves carboxylic ester bonds. Among the options given, identify the polymer (s) degraded by lipase.
  122. Question 122 (2 marks, Multiple select) – Among the options given, identify the correct pair (s) of catalyst and co-catalyst that form a Ziegler-Natta catalyst.
  123. Question 123 (2 marks, Multiple select) – Match P rubbery regime, Q around Tg, R deformed sample with statements1 stress relaxation dissipates excess free energy,2 long-range molecular…
  124. Question 124 (2 marks, Multiple select) – Stress versus elongation profiles for different polymeric materials are shown in the figure. Choose the combination that best describes these…
  125. Question 125 (2 marks, Multiple select) – Among the options given, which method (s) is/are used for the synthesis of atactic polystyrene?
  126. Question 126 (2 marks, Numerical answer) – A nylon sample of 0.03 m2 cross-sectional area is subjected to a creep load of 10 kN. The load is removed after a duration of 60 s. Young’s modulus…
  127. Question 127 (2 marks, Numerical answer) – Polyvinylidine fluoride (PVDF) was quenched from the melt in one case and in the other case, it was slowly cooled from the melt at 10 °C/min. The…
  128. Question 128 (2 marks, Numerical answer) – A polymeric material of density 0.9 g/cc and melt volume of 10 cc in an extruder has a residence time of 100 s. The output of the extruder is kg/h.…
  129. Question 129 (2 marks, Numerical answer) – A polymer weighing 0.2 g is dissolved in 100 ml of benzene and has a relative viscosity of 1.5. The polymer obeys Mark-Houwink equation with constants…
  130. Question 130 (2 marks, Numerical answer) – A continuous and aligned glass-fiber reinforced composite consists of 40 vol% of glass-fiber having a modulus of elasticity of 69 GPa and 60 vol% of a…
  131. Question 131 (2 marks, Numerical answer) – A polymer distribution contains100 molecules of molar mass7500 g/mol and 50 molecules of 5000 g/mol. Find its weight-average molecular mass in g/mol,…
  132. Question 132 (1 mark, Multiple choice) – Choose the correct group of fat soluble vitamins
  133. Question 133 (1 mark, Multiple choice) – The synthesis of thyroxine T4 in human body requires
  134. Question 134 (1 mark, Multiple choice) – Which among the followings is NOT an essential amino acid?
  135. Question 135 (1 mark, Multiple choice) – The time required for stipulated destruction of a microbial population at a given temperature is
  136. Question 136 (1 mark, Multiple choice) – Which among the following statements is NOT correct?
  137. Question 137 (1 mark, Multiple choice) – Which of the following statements is NOT correct?
  138. Question 138 (1 mark, Numerical answer) – Calculate the efficiency in percent (rounded off to 1 decimal place) of an oil expeller which yields 37 kg oil containing 5% solid impurities from 100…
  139. Question 139 (1 mark, Numerical answer) – Orange juice is packaged aseptically and stored under ambient conditions. The degradation of vitamin C in the juice occurs during storage and it…
  140. Question 140 (1 mark, Numerical answer) – The weight of 10 kg dried cauliflower containing 5% moisture (wet basis) after rehydration is 60 kg. If the fresh cauliflower contained 87% moisture…
  141. Question 141 (2 marks, Multiple choice) – Match P vinegar, Q citric acid, R ethanol, S L-lysine with 1 Enterobacter aerogenes,2 Saccharomyces cerevisiae,3 Acetobacter aceti,4 Aspergillus…
  142. Question 142 (2 marks, Multiple choice) – Match enzymes P chymosin, Q thermolysin, R beta-galactosidase, S lipase with 1 acylglycerol restructuring,2 lactose hydrolysis,3 aspartame synthesis,4…
  143. Question 143 (2 marks, Multiple choice) – Identify the Gram + ve bacteria responsible for causing food borne diseases among the followings
  144. Question 144 (2 marks, Multiple choice) – Extrusion cooking stages I–IV are marked on the temperature/pressure profile. Which option correctly names each stage?
  145. Question 145 (2 marks, Multiple choice) – Match P thiobarbituric-acid test, Q Rancimat method, R peroxide value, S iodine value with 1 induction time,2 degree of unsaturation,3 carbonyl…
  146. Question 146 (2 marks, Multiple choice) – Match peeling methods P knife, Q abrasion, R flame, S flash with vegetables1 brinjal,2 tomato,3 potato,4 cucumber.
  147. Question 147 (2 marks, Multiple choice) – Match P caramelization, Q denaturation, R oxidation, S bleaching with 1 lipid,2 sugar,3 pigment,4 enzyme.
  148. Question 148 (2 marks, Multiple select) – Identify the correct statement (s) related to grain polysaccharides among the followings.
  149. Question 149 (2 marks, Multiple select) – Identify the correct pair (s) of governing law with respective process operation.
  150. Question 150 (2 marks, Numerical answer) – A hammer mill is used to grind blackgram. The size distribution of the blackgram is such that 80% passes through a 6-mesh (particle size = 3.36 mm)…
  151. Question 151 (2 marks, Numerical answer) – If D10 for Salmonella in egg yolk is 0.75 kGy, calculate the radiation dose in kGy (rounded off to 2 decimal places) required for reducing the…
  152. Question 152 (2 marks, Numerical answer) – At8% dry-basis moisture, a textured plant-protein product has average moisture-binding energy3200 cal mol⁻¹ and water activity0.30 at 30°C. Find its…
  153. Question 153 (2 marks, Numerical answer) – Cow milk is pasteurized at a flow rate of 1 kg.s-1 in a counter-current heat exchanger using hot water as the heating medium. The milk enters the heat…
  154. Question 154 (1 mark, Multiple choice) – The net water level elevation near the coast arising due to a tropical-cyclone- induced storm is a combination of the following factors .
  155. Question 155 (1 mark, Multiple choice) – The typical speeds of a tsunami wave in water depths of 10 m, 100 m, and 1000 m, respectively, are .
  156. Question 156 (1 mark, Multiple choice) – Which classification of tides best represents the west coast of India?
  157. Question 157 (1 mark, Multiple choice) – The variation in geostrophic winds with height, in particular, at the atmospheric boundary layer, considering the variation in pressure gradient as a…
  158. Question 158 (1 mark, Multiple choice) – Consider the following options and pick out the right choice. The solubility of a gas in sea water increases with .
  159. Question 159 (1 mark, Multiple choice) – From the list given below, identify the organism type in the biological pump that takes up carbon dioxide from the atmosphere into the ocean.
  160. Question 160 (1 mark, Multiple choice) – The amount of CO2 that can be absorbed when the temperature of seawater decreases.
  161. Question 161 (1 mark, Multiple choice) – Which among the following gases has the highest global warming potential?
  162. Question 162 (1 mark, Multiple choice) – What will happen to the speed of a balanced flow as one moves across the isobar along a particular latitude?
  163. Question 163 (2 marks, Multiple choice) – The following illustration depicts the circulation pattern in the North Indian Ocean during the southwest (June-August) monsoon. Identify the markers…
  164. Question 164 (2 marks, Multiple choice) – From the following list identify the region that has low chlorophyll and low nutrients.
  165. Question 165 (2 marks, Multiple choice) – Match a seasonal reversal of east–west temperature gradient, b seasonal reversal of north–south gradient, c surface cooling and mixed-layer deepening,…
  166. Question 166 (2 marks, Multiple select) – Choose the correct statement (s) in context to Ekman spiral from the following:
  167. Question 167 (2 marks, Multiple select) – Which of the following is/are associated with winter rainfall over India?
  168. Question 168 (2 marks, Numerical answer) – Global albedo rises from 0.3 to 0.4. With no greenhouse effect, S = 1360 W/m² and Stefan–Boltzmann constant5.67 × 10⁻⁸ W m⁻² K⁻⁴, find the global…
  169. Question 169 (2 marks, Numerical answer) – When a parcel of dry air rises at a rate of 2 cm s-1 vertically, what should be the rate of heating per unit mass in J s-1 kg-1 (due to the radiation,…
  170. Question 170 (2 marks, Numerical answer) – Two balls each of 5 cm in diameter are placed 200 m apart on a horizontal frictionless plane at 45º N. The balls are impulsively propelled directly at…
  171. Question 171 (2 marks, Numerical answer) – A parcel of dry air having an initial temperature of 30 ºC at 1000 hPa level is lifted adiabatically. At what pressure (in hPa) its density reduces by…
  172. Question 172 (2 marks, Numerical answer) – Water in a cylindrical tank rotates steadily at 10 rad/s. Points A and B on one isobar lie at radii0.5 and 1.0 m and elevations z1, z2. With g = 9.8…
  173. Question 173 (2 marks, Numerical answer) – Consider that there are 295 million vehicles across India and they drive about 12000 km yr-1. Each vehicle consumes about 25 km lit-1 of petrol and…
  174. Question 174 (2 marks, Numerical answer) – Consider the two parallel isobars separated by a spacing of 250 km at 30º N (air density = 0.70 kg m-3, 2Ω = 14.6 × 10-5 rad s-1) with a pressure…
  175. Question 175 (2 marks, Numerical answer) – The depicted gyre at 45°N has low L and high H regions. With no wind, the mean sea-surface slope between A and B is 2.1 cm/km. A steady southerly wind…