The GATE Grind

GATE 2023 XE β€” all source sections – Question 78

Solid Mechanics (XE3) Β· Mechanics of Deformable Bodies Β· 2 marks Β· Multiple choice

The figure shows a column of rectangular cross section 100 mm Γ— 80 mm. It carries a load of 60 kN at a point 30 mm from the edge 𝑃𝑄. The values of stress component πœŽπ‘§π‘§ on surfaces 𝑃𝑄𝑄′𝑃′ and 𝑆𝑅𝑅′𝑆′, at points far away from both ends of the column, are respectively

Diagram for GATE 2023 XE β€” all source sections question 78
  1. 18.75 N/mm2 (Compressive) and 3.75 N/mm2 (Tensile)
  2. 18.75 N/mm2 (Compressive) and 3.75 N/mm2 (Compressive)
  3. 13.13 N/mm2 (Compressive) and 1.88 N/mm2 (Tensile)
  4. 13.13 N/mm2 (Compressive) and 1.88 N/mm2 (Compressive)

Practise this question in The GATE Grind β†’

Show answer and explanation

Correct answer: (D) 13.13 N/mm2 (Compressive) and 1.88 N/mm2 (Compressive)

Explanation

The centroid is 40 mm from PQ and the load30 mm from it, so eccentricity is 10 mm. Direct compression = P/A = 60000/8000 = 7.5 MPa. Bending adds/subtracts Pec/I, with c = 40 mm, I = 100 Γ— 80Β³/12, producing5.625 MPa. The two surfaces carry13.13 and 1.88 MPa compression, D.

More Mechanics of Deformable Bodies questions

All Mechanics of Deformable Bodies questions β†’