GATE Solid Mechanics (XE3): Mechanics of Deformable Bodies – Previous Year Questions
63 GATE previous year questions on Mechanics of Deformable Bodies (Solid Mechanics (XE3), Engineering Sciences) with answers and explanations, from every paper.
63 questions worth 107 marks in all (19 1-mark, 44 2-mark). Asked between 2020 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q67 – For an isotropic material with Young's modulus E and Poisson's ratio , the bulk modulus is
- GATE 2020 XE — all source sections Q68 – A body subjected to does not undergo a change in volume.
- GATE 2020 XE — all source sections Q70 – According to Euler-Bernoulli beam theory, which statement best describes a beam subjected to pure bending?
- GATE 2020 XE — all source sections Q73 – The two-dimensional plane-stress state at a point is shown on triangular element ABC, where =3/5 and =4/5. The normal stress (MPa) on plane AC is .
- GATE 2020 XE — all source sections Q75 – Cantilever beam AC consists of segments AB and BC rigidly connected at B. Segment AB has flexural rigidity EI and segment BC has infinite flexural…
- GATE 2020 XE — all source sections Q76 – Determine the correctness of the assertion and reason. Assertion: Efficient columns are designed so most of the cross-sectional area is located as far…
- GATE 2020 XE — all source sections Q77 – Two massless elastic bars AB and BC each have length L, cross-sectional area A, and Young's modulus E. All connections at A, B, C are pinned. A…
- GATE 2020 XE — all source sections Q79 – A beam of flexural rigidity EI is fixed at A and supported by a linear spring of stiffness k=EI/L3 at B. Determine the compressive force developed in…
- GATE 2020 XE — all source sections Q80 – Bar AB is fixed at A and separated by a 0.005 mm gap from wall C. Its temperature increases by 10°C. Given Young's modulus E=200 GPa and thermal…
- GATE 2020 XE — all source sections Q81 – A thin-walled spherical pressure vessel has mean radius 1000 mm and wall thickness 10 mm. The material has Young's modulus 200 GPa and Poisson's ratio…
- GATE 2020 XE — all source sections Q83 – A pin-jointed truss has a pin support at A and a roller support at C. All members have the same material and cross-section; neglect self-weight. For…
- GATE 2020 XE — all source sections Q84 – Two beams AB and BC, each 100 mm in diameter, are connected by an internal hinge at B. The structure is fixed at A and roller-supported at C. A load…
- GATE 2020 XE — all source sections Q85 – The shear-force diagram for beam AD, simply supported at A and D, is shown. The magnitude of the maximum bending moment (kN·m), rounded to three…
- GATE 2020 XE — all source sections Q86 – A rectangular thin plate has Young's modulus 200 GPa and Poisson's ratio 0.30 and is subjected to uniform edge stresses as shown. Dimension b=100 mm…
- GATE 2020 XE — all source sections Q87 – A solid transmission shaft has length 10 m and diameter 100 mm, supported by frictionless bearings at its ends as simple supports. Its self-weight…
- GATE 2023 XE — all source sections Q68 – Two equivalent descriptions of the state of stress at a point are shown in the figure. The normal stresses 𝜎1 and 𝜎2 as shown on the right must be,…
- GATE 2023 XE — all source sections Q69 – At a point, εxx = 2.5 × 10⁻⁴, εyy = 2.0 × 10⁻⁴, εzz = − 1.5 × 10⁻⁴, εxy = 2.5 × 10⁻⁴, εyz = − 0.5 × 10⁻⁴, εzx = − 1.0 × 10⁻⁴. Find volumetric strain.
- GATE 2023 XE — all source sections Q70 – A closed thin cylindrical vessel has inside diameter d, wall thickness t and internal pressure p. Find hoop stressσ1 and longitudinal stressσ2.
- GATE 2023 XE — all source sections Q74 – For a plane stress problem, the principal stresses are 100 MPa and 50 MPa. The magnitude of maximum shear stress (in MPa) in the material is (rounded…
- GATE 2023 XE — all source sections Q76 – A rubber cylinder of length L, diameter d fits snugly in a rigid frictionless container. Its top receives small uniform axial pressure p. With Young’s…
- GATE 2023 XE — all source sections Q77 – The state of stress at the critical location in a structure is 𝜎𝑥𝑥 = 420 MPa, 𝜎𝑦𝑦 = 100 MPa, 𝜎𝑧𝑧 = 𝜎𝑥𝑦 = 𝜎𝑦𝑧 = 𝜎𝑧𝑥 = 0. The yield…
- GATE 2023 XE — all source sections Q78 – The figure shows a column of rectangular cross section 100 mm × 80 mm. It carries a load of 60 kN at a point 30 mm from the edge 𝑃𝑄. The values of…
- GATE 2023 XE — all source sections Q79 – Consider an electric pole with dimensions as shown in the figure. Let the end R be subjected to a vertical force F. The flexural rigidity of both…
- GATE 2023 XE — all source sections Q80 – A cantilever of length L and rigidity EI has downward free-end force F and clockwise free-end moment M = 2FL, which reinforce downward deflection.…
- GATE 2023 XE — all source sections Q84 – A thin steel plate under plane stress hasσxx = 120 MPa and unknownσyy. E = 200 GPa, ν = 0.3, and measuredεzz = − 3 × 10⁻⁴. Findσyy in MPa, to one…
- GATE 2023 XE — all source sections Q85 – A composite rod made of steel and copper is fixed immovably at its ends as shown in the figure. The length of each portion of the rod is 1 m as shown.…
- GATE 2023 XE — all source sections Q86 – A slender uniform elastic rod of length 1 m and of solid circular cross-section of diameter 50 mm is originally straight. It is then loaded by equal…
- GATE 2023 XE — all source sections Q87 – Consider a solid cylindrical shaft and a hollow cylindrical shaft. Both shafts are axisymmetric and elastic, and have the same cross-sectional area.…
- GATE 2024 XE — all source sections Q66 – The engineering stress (𝜎) vs. engineering strain (𝜀) curve obtained by conducting uniaxial tension test on a steel specimen is shown in the figure…
- GATE 2024 XE — all source sections Q70 – The shown simply supported rectangular beam (width w, height h) carries equal loads P at L/4 from each end. At midspan, the origin O is the section…
- GATE 2024 XE — all source sections Q72 – A solid circular shaft of diameter 100 mm is subjected to a torque 3𝜋 kNm. Which of the following statements about the state of stress in the shaft…
- GATE 2024 XE — all source sections Q73 – A70-mm bar of area10 mm², E = 70000 MPa is fixed at its left end. Its right end connects in series to a spring of stiffness10⁷ N/m, whose free end O…
- GATE 2024 XE — all source sections Q75 – A rosette has gauges p, q, r at 0°,45°,90° to x. Readings are εp = 150 × 10⁻⁶, εq = 180 × 10⁻⁶, εr = − 90 × 10⁻⁶. Find engineering shear strain γxy.
- GATE 2024 XE — all source sections Q76 – The rigid bar PQR is hinged at P and joined by identical vertical links QS and RT to fixed supports S, T. Both links have the same material and…
- GATE 2024 XE — all source sections Q79 – A stress tensor is diag (280, σ0, − 60) MPa and uniaxial yield strength is 400 MPa. Which σ0 values give onset of Tresca yielding?
- GATE 2024 XE — all source sections Q80 – A plane through Q has unit normal n = 0.6i + 0.8j and traction t = (50i + 20j) MPa. At Q, σxx = σyy. Find τxy in MPa, to two decimals.
- GATE 2024 XE — all source sections Q82 – A perfectly bonded two-layer rectangular beam has equal-width layers each1 mm thick. Top-layer modulus E1 is twice bottom E2. Under pure bending, find…
- GATE 2024 XE — all source sections Q83 – A cantilever of total length L has inertia I1 over its fixed-end half and I2 over its free-end half, with I1 = 8I2 and common E. A transverse tip load…
- GATE 2024 XE — all source sections Q84 – A2-m-inner-diameter,10-m-long pressure vessel consists of two flanged semicylindrical halves joined by two longitudinal bolt rows,100 bolts in each…
- GATE 2025 XE — all source sections Q68 – The Mohr’s circle corresponding to an infinitesimal element is shown in the figure. The plane PQ in the infinitesimal element, at an angle of 𝜃 from…
- GATE 2025 XE — all source sections Q69 – The two-dimensional state of stress, in an infinitesimal element, is given by 𝜎𝑥𝑥 = 800 MPa, 𝜎𝑥𝑦 = 300 MPa and 𝜎𝑦𝑦 = 0 MPa. Which one of the…
- GATE 2025 XE — all source sections Q72 – A concentric hollow square beam section has outer side10 mm and uniform wall thickness1 mm. Find its area moment about the centroidal x-axis parallel…
- GATE 2025 XE — all source sections Q73 – For a certain linear elastic isotropic material, the Young’s modulus is 140 GPa and the shear modulus is 50 GPa. The Poisson’s ratio for the material…
- GATE 2025 XE — all source sections Q76 – Which one of the following vertical columns, of circular cross-section, sustains the highest load without buckling?
- GATE 2025 XE — all source sections Q79 – A closed thin cylindrical tank with a mean diameter d = 300 mm and thickness t = 2 mm, is subjected to a uniform internal gas pressure p. The…
- GATE 2025 XE — all source sections Q80 – Square PQRS has sides parallel to x, y and diagonals PR, QS. Its infinitesimal strains are εxx = 500 × 10⁻⁶, εyy = 100 × 10⁻⁶, εxy = 0. Which listed…
- GATE 2025 XE — all source sections Q81 – Across a rectangular beam section of height30 mm and depth10 mm, σxx = 200y + 500 N/mm², where y is mm from the centroidal axis. Stress is uniform…
- GATE 2025 XE — all source sections Q82 – A vertical column fixed at one end is subjected to a compressive axial load at the free end. The column’s section modulus, EI, is 9.82 × 105 Nm2 and…
- GATE 2025 XE — all source sections Q83 – A simply supported1-m beam has P = 150 kN at L/3 from its left end. Its strain energy is U=2P2L3/(243EI) and EI = 16.66 × 10⁵ N m². Find load-point…
- GATE 2025 XE — all source sections Q84 – A4-m simply supported beam has circular section diameter20 mm, A = 314.2 mm², I = 7854 mm⁴. A100-N transverse point load acts at midspan and a20-kN…
- GATE 2025 XE — all source sections Q87 – A1-m bar fixed at one end has a0.1-mm gap between its free end and a rigid wall. Temperature rises uniformly10°C. Use α = 20 × 10⁻⁶ per°C and E = 100…
- GATE 2026 XE — all source sections Q70 – Which are units of stress?
- GATE 2026 XE — all source sections Q73 – At a point in a body, σxx=−40 MPa, σyy=100 MPa and τxy=50 MPa. Find the radius of the in-plane Mohr circle in MPa, to two decimals.
- GATE 2026 XE — all source sections Q74 – Find the sum of principal stresses for the two-dimensional stress tensor pmatrix11&4\\4&5pmatrix. Give an integer.
- GATE 2026 XE — all source sections Q76 – For the frame, supports and central downward force F shown, find the absolute bending moment at R. Dimensions are given in multiples of l.
- GATE 2026 XE — all source sections Q77 – Two columns of the same material have equal cross-sectional area: one square of side r and one rectangular of sides p and q, with q<p. Each is fixed…
- GATE 2026 XE — all source sections Q78 – Two equal-length prismatic rods carry the same axial load and have equal strain-energy density. Steel has E=210 GPa and aluminium E=70 GPa. If the…
- GATE 2026 XE — all source sections Q80 – Which diagram is equivalent to the shown two-dimensional state of pure shear? Figures are not to scale.
- GATE 2026 XE — all source sections Q83 – A simply supported beam has a triangular piecewise-linear bending-moment diagram: M=0 at x=0, M=5 N·m at x=0.5 m and M=0 at x=1 m. Its rectangular…
- GATE 2026 XE — all source sections Q84 – A thin-walled cylindrical steel container has diameter 2 m and wall thickness 2.5 cm. Young’s modulus is 200 GPa and yield stress is 450 MPa. Using…
- GATE 2026 XE — all source sections Q85 – A solid steel bar has E=200 GPa and Poisson ratio 0.3 under uniaxial stress 50 MPa. Express the absolute maximum shear strain on its outer surface as…
- GATE 2026 XE — all source sections Q86 – EFGH is initially a 50-mm-wide, 75-mm-high rectangle. E and F stay fixed. H moves horizontally right by 10 mm and G right by 15 mm, with no vertical…
- GATE 2026 XE — all source sections Q87 – A simply supported beam of length l=2 m carries a concentrated midpoint moment M=150 kN·m. Its supplied elastic strain energy is U=M2l/(48EI), with…