GATE Thermodynamics (XE4): Thermodynamic Cycles – Previous Year Questions
24 GATE previous year questions on Thermodynamic Cycles (Thermodynamics (XE4), Engineering Sciences) with answers and explanations, from every paper.
24 questions worth 39 marks in all (9 1-mark, 15 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2020 XE — all source sections Q91 – The relation between the coefficient of performance of a refrigerator (COP) R and that of a heat pump (COP) HP is
- GATE 2020 XE — all source sections Q96 – An air-standard Diesel cycle has compression ratio 18, cut-off ratio 1.7, and specific-heat ratio 1.4. Its thermal efficiency (percent), rounded to…
- GATE 2020 XE — all source sections Q98 – A reversible heat engine operates between reservoirs at T 1>T 2. Which option most effectively increases its thermal efficiency?
- GATE 2020 XE — all source sections Q101 – An air-standard Otto cycle's compression ratio changes from 4 to 6. For specific-heat ratio 1.4, the percentage increase in thermal efficiency is
- GATE 2020 XE — all source sections Q107 – A Rankine cycle has turbine inlet conditions 10 MPa and 500 °C and condenser pressure 10 kPa. At 10 kPa, saturated-liquid enthalpy and entropy are…
- GATE 2020 XE — all source sections Q108 – An air-standard Brayton cycle has minimum and maximum temperatures 300 K and 1100 K, pressure ratio 6, specific-heat ratio 1.4, and constant specific…
- GATE 2019 XE — all source sections Q91 – Addition of a reheat process to a simple Rankine cycle will always
- GATE 2019 XE — all source sections Q92 – A Carnot cycle implemented using an ideal gas in a piston-cylinder system will have
- GATE 2019 XE — all source sections Q104 – In a vapour-compression system, a refrigerant leaves the evaporator and enters the compressor as saturated vapour at 0 C. The specific enthalpies of…
- GATE 2019 XE — all source sections Q107 – In a simple Rankine cycle, superheated steam enters a turbine at 100 bar and 500 C (h=3375.1 kJ/kg, s=6.5995 kJ kg-1 K-1) at 1000 kg/s and expands…
- GATE 2023 XE — all source sections Q91 – If an ideal air-standard Otto cycle and an ideal air-standard Diesel cycle operate on the same compression ratio, then the relation between the…
- GATE 2023 XE — all source sections Q98 – An ideal Diesel cycle has a compression ratio of 20 and cut-off ratio of 1.5. At the beginning of the compression stroke, air is at 100 kPa, 300 K.…
- GATE 2023 XE — all source sections Q104 – Consider a spark ignition engine which operates on an ideal air-standard Otto cycle. It uses a fuel which produces 44 MJ/kg of heat in the engine. If…
- GATE 2023 XE — all source sections Q105 – A refrigerator operates on an ideal vapor compression cycle between the pressure limits of 140 kPa and 800 kPa. The working fluid is the refrigerant…
- GATE 2023 XE — all source sections Q106 – A steam power plant operates on a simple ideal Rankine cycle. The condenser pressure is 10 kPa and the boiler pressure is 5 MPa. The steam enters the…
- GATE 2024 XE — all source sections Q92 – For a simple ideal Rankine cycle, what happens when steam superheating is added?
- GATE 2024 XE — all source sections Q95 – Following data is for an actual vapour compression refrigeration cycle. Enthalpy at compressor inlet: 246kJ/kg Enthalpy at compressor exit: 286kJ/kg…
- GATE 2024 XE — all source sections Q103 – Consider the following data from a Brayton cycle. Enthalpy at inlet to turbine: 1400kJ/kg Enthalpy at exit of turbine: 880kJ/kg Enthalpy at exit of…
- GATE 2025 XE — all source sections Q92 – For specific-heat ratio γ, what is the air-standard Otto-cycle efficiency?
- GATE 2025 XE — all source sections Q97 – In an ideal gas-turbine cycle, T1 and T3 are compressor/turbine inlet absolute temperatures, t = T3/T1, and γ is specific-heat ratio. What pressure…
- GATE 2025 XE — all source sections Q101 – An ideal Diesel cycle compresses air from 3 L to 0.15 L, then adds heat at constant pressure until volume0.3 L. With γ = 1.4, find thermal efficiency…
- GATE 2026 XE — all source sections Q96 – An ideal Otto cycle uses cold-air-standard assumptions. Compression begins at 300 K and ends at 750 K; the specific-heat ratio is 1.4. Find thermal…
- GATE 2026 XE — all source sections Q100 – An ideal Rankine cycle has fixed turbine-inlet conditions. What happens when condenser pressure is lowered?
- GATE 2026 XE — all source sections Q107 – An ideal Diesel cycle uses cold-air-standard assumptions with compression ratio 20, cut-off ratio 1.8 and γ=1.4. At compression end, T₂=1120 K and…