The GATE Grind

GATE Digital Circuits: Data Converters – Previous Year Questions

11 GATE previous year questions on Data Converters (Digital Circuits, Electronics and Communication Engineering) with answers and explanations, from every paper.

11 questions worth 15 marks in all (7 1-mark, 4 2-mark). Asked between 2014 and 2025, so you can see how the topic has been tested over time.

  1. GATE 2016 EC (EC2) Q53 (2 marks, Multiple choice) – An N-bit flash ADC drives 2N-1 comparator inputs simultaneously. The input voltage source has resistance 75 Ω and each comparator input capacitance is…
  2. GATE 2014 EC (EC4) Q24 (1 mark, Multiple choice) – For a given sample-and-hold circuit, increasing the hold capacitor causes .
  3. GATE 2014 EC (EC3) Q24 (1 mark, Numerical answer) – An analog voltage range 0–8 V is divided into 16 equal intervals for a four-bit output. Find maximum quantization error (V).
  4. GATE 2015 EC Q26 (1 mark, Numerical answer) – Consider a four bit D to A converter. The analog value corresponding to digital signals of values 0000 and 0001 are 0 V and 0.0625 V respectively. The…
  5. GATE 2020 EC Q30 (1 mark, Numerical answer) – A 10-bit D/A converter is calibrated over the full range from 0 to 10 V. If the input to the D/A converter is 13A (in hex), the output (rounded off to…
  6. GATE 2021 EC Q30 (1 mark, Numerical answer) – An 8-bit unipolar (all analog output values are positive) digital-to-analog converter (DAC) has a full-scale voltage range from 0 V to 7.68 V. If the…
  7. GATE 2023 EC Q31 (1 mark, Numerical answer) – The signal-to-noise ratio (SNR) of an ADC with a full-scale sinusoidal input is given to be 61.96 dB. The resolution of the ADC is bits (rounded off…
  8. GATE 2023 EC Q62 (2 marks, Numerical answer) – A sample and hold circuit is implemented using a resistive switch and a capacitor with a time constant of 1 μs. The time for the sampling switch to…
  9. GATE 2024 EC Q46 (2 marks, Multiple choice) – A full scale sinusoidal signal is applied to a 10-bit ADC. The fundamental signal component in the ADC output has a normalized power of 1 W, and the…
  10. GATE 2025 EC Q35 (1 mark, Numerical answer) – A 4-bit weighted-resistor DAC with inputs b 3, b 2, b 1, and b 0 (MSB to LSB) is designed using an ideal opamp, as shown below. The switches are…
  11. GATE 2025 EC Q44 (2 marks, Multiple choice) – A 10-bit analog-to-digital converter (ADC) has a sampling frequency of 1 MHz and a full scale voltage of 3.3 V. For an input sinusoidal signal with…