GATE Engineering Mechanics: Friction and its applications: belts, brakes, clutches, screw jack, wedge – Previous Year Questions
8 GATE previous year questions on Friction and its applications: belts, brakes, clutches, screw jack, wedge (Engineering Mechanics, Mechanical Engineering) with answers and explanations, from every paper.
8 questions worth 11 marks in all (5 1-mark, 3 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME2) Q19 – The forces F1 and F2 in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is 0.25. The…
- GATE 2016 ME (ME1) Q40 – A block of mass m rests on an inclined plane and is tied by a string to the wall as shown. The coefficient of static friction is 0.25. The string can…
- GATE 2019 ME (ME1) Q29 – A 10 kg block rests on a horizontal floor. Static-friction coefficient is 0.2 and g = 9.81 m/s². A horizontal 10 N force acts as shown. Find friction…
- GATE 2021 ME (ME2) Q61 – A block of negligible mass rests on a surface that is inclined at 30° to the horizontal plane as shown in the figure. When a vertical force of 900 N…
- GATE 2022 ME (ME2) Q30 – A rope with two mass-less platforms at its two ends passes over a fixed pulley as shown in the figure. Discs with narrow slots and having equal weight…
- GATE 2022 ME (ME1) Q18 – A square threaded screw is used to lift a load W by applying a force F. Efficiency of square threaded screw is expressed as
- GATE 2023 ME Q34 – The braking system shown in the figure uses a belt to slow down a pulley rotating in the clockwise direction by the application of a force P. The belt…
- GATE 2026 ME Q48 – A block of 50 kg mass is on an inclined plane. The block is connected to another hanging mass M by an inextensible massless string through two…