The GATE Grind

GATE Mechanics of Materials: Thin-walled pressure vessels – Previous Year Questions

7 GATE previous year questions on Thin-walled pressure vessels (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.

7 questions worth 12 marks in all (2 1-mark, 5 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2017 ME (ME1) Q26 (1 mark, Multiple choice) – A beam has a circular cross-section of diameter d. The ratio of its second moment of area about the neutral axis to its section modulus is
  2. GATE 2016 ME (ME2) Q18 (1 mark, Multiple choice) – A thin cylindrical pressure vessel with closed-ends is subjected to internal pressure. The ratio of circumferential (hoop) stress to the longitudinal…
  3. GATE 2018 ME (ME2) Q47 (2 marks, Numerical answer) – A thin-walled cylindrical can with rigid end caps has mean radius R = 100 mm and wall thickness t = 5 mm. It is pressurized and subjected to…
  4. GATE 2022 ME (ME1) Q52 (2 marks, Numerical answer) – A thin-walled cylindrical pressure vessel has mean wall thickness of t and nominal radius of r. The Poisson's ratio of the wall material is 1/3. When…
  5. GATE 2023 ME Q40 (2 marks, Multiple choice) – The figure shows a thin-walled open-top cylindrical vessel of radius r and wall thickness t. The vessel is held along the brim and contains a…
  6. GATE 2024 ME Q57 (2 marks, Numerical answer) – The figure shows a thin cylindrical pressure vessel constructed by welding plates together along a line that makes an angle = 60° with the horizontal.…
  7. GATE 2026 ME Q51 (2 marks, Numerical answer) – A cylindrical pressure vessel made of steel has diameter of 3 m and wall thickness of 15 mm. For steel, Young's modulus and Poisson's ratio are 210…