The GATE Grind

GATE Mechanics of Materials: Deflection of beams – Previous Year Questions

10 GATE previous year questions on Deflection of beams (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.

10 questions worth 16 marks in all (4 1-mark, 6 2-mark). Asked between 2016 and 2023, so you can see how the topic has been tested over time.

  1. GATE 2017 ME (ME1) Q25 (1 mark, Numerical answer) – A solid circular steel shaft transmits 40 kW at 500 rpm. Its diameter is 40 mm. Find the maximum shear stress in MPa.
  2. GATE 2016 ME (ME3) Q45 (2 marks, Multiple choice) – A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity of the beam is EI. The reaction at the simple…
  3. GATE 2016 ME (ME2) Q43 (2 marks, Multiple choice) – A simply supported beam of length 2L carries midpoint moment M at x = 0, as shown. For 0 x L, w=-Mx(L-x)(x+c)/(12EIL), where E is Young’s modulus, I…
  4. GATE 2016 ME (ME1) Q19 (1 mark, Multiple choice) – A cantilever beam having square cross-section of side a is subjected to an end load. If a is increased by 19%, the tip deflection decreases…
  5. GATE 2019 ME (ME2) Q41 (2 marks, Multiple choice) – The prismatic straight elastic cantilever shown has triangular transverse load, q at the fixed end and zero at the free end. With length L, Young’s…
  6. GATE 2019 ME (ME2) Q47 (2 marks, Numerical answer) – The horizontal circular-section cantilever shown has length 1.0 m, flexural rigidity 200 N·m² and applied end moment 1.0 N·m. Find free-end vertical…
  7. GATE 2020 ME (ME2) Q38 (2 marks, Multiple choice) – A cantilever of length l and flexural rigidity EI is stiffened by a spring of stiffness k and loaded by transverse tip force P as shown. Find its…
  8. GATE 2021 ME (ME2) Q63 (2 marks, Numerical answer) – A cantilever beam with a uniform flexural rigidity (EI=200106 N.m²) is loaded with a concentrated force at its free end. The area of the bending…
  9. GATE 2021 ME (ME1) Q27 (1 mark, Multiple choice) – A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the figure. The deflection of the beam at…
  10. GATE 2023 ME Q16 (1 mark, Multiple choice) – The effective stiffness of a cantilever beam of length L and flexural rigidity EI subjected to a transverse tip load W is