GATE Theory of Machines: Gears and gear trains – Previous Year Questions
13 GATE previous year questions on Gears and gear trains (Theory of Machines, Mechanical Engineering) with answers and explanations, from every paper.
13 questions worth 21 marks in all (5 1-mark, 8 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2017 ME (ME1) Q55 – An epicyclic gear train has a fixed outer ring, a sun rotating counterclockwise at 100 rpm, and 50, 25 and 100 teeth on sun, planet and ring…
- GATE 2016 ME (ME1) Q46 – In the gear train shown, gear 3 is carried on arm 5. Gear 3 meshes with gear 2 and gear 4. The number of teeth on gear 2, 3, and 4 are 60, 20, and…
- GATE 2017 ME (ME2) Q44 – Three masses are connected to a rotating shaft supported at A and B as shown, in the absence of gravity. Neglect shaft and connecting-rod masses.…
- GATE 2018 ME (ME2) Q16 – In the frictionless gear train shown, the leftmost 12-tooth gear receives 100 N·m torque. Find the output torque (N·m) of the rightmost 60-tooth gear.
- GATE 2018 ME (ME1) Q40 – In the gear train shown, tooth counts are A = 20, B = 30, D = 20; C has 80 internal and 100 external teeth. Carrier AB is fixed. If A rotates…
- GATE 2019 ME (ME2) Q17 – A spur gear has pitch-circle diameter D and T teeth. Find its circular pitch.
- GATE 2019 ME (ME1) Q17 – A 20° full-depth spur gear transmits 20 kW at 200 rad/s. Pitch-circle diameter is 100 mm. Find the radial tooth force magnitude.
- GATE 2020 ME (ME2) Q39 – The sun S and planet P in the epicyclic gear train have identical tooth counts. If sun and outer ring R rotate in the same direction at angular speeds…
- GATE 2021 ME (ME2) Q42 – A power transmission mechanism consists of a belt drive and a gear train as shown in the figure. Diameters of pulleys of belt drive and number of…
- GATE 2022 ME (ME1) Q53 – A schematic of an epicyclic gear train is shown in the figure. The sun (gear 1) and planet (gear 2) are external, and the ring gear (gear 3) is…
- GATE 2023 ME Q29 – Two meshing spur gears 1 and 2 with diametral pitch of 8 teeth per mm and an angular velocity ratio 2 / 1 = 1/4, have their centers 30 mm apart. The…
- GATE 2024 ME Q52 – The Levai type-A train illustrated in the figure has gears with module m = 8 mm/tooth. Gears 2 and 3 have 19 and 24 teeth respectively. Gear 2 is…
- GATE 2026 ME Q17 – A gear train with five gears is shown in the figure below. The number of teeth on each gear is N 1, N 2, N 3, N 4, and N 5. The idler gear in this…