GATE Vibrations: Forced vibration and resonance – Previous Year Questions
7 GATE previous year questions on Forced vibration and resonance (Vibrations, Mechanical Engineering) with answers and explanations, from every paper.
7 questions worth 12 marks in all (2 1-mark, 5 2-mark). Asked between 2016 and 2024, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q47 – A single-degree-of-freedom spring–mass system is excited by a harmonic force of constant amplitude at frequency 3k/m. The ratio of steady-state…
- GATE 2016 ME (ME1) Q21 – A single degree of freedom spring mass system with viscous damping has a spring constant of 10 kN/m. The system is excited by a sinusoidal force of…
- GATE 2018 ME (ME1) Q17 – A spring–mass system obeys M x+Kx=F( t), with mass M, stiffness K, force amplitude F and excitation angular frequency ω. Resonance occurs at ω = .
- GATE 2021 ME (ME1) Q42 – A tappet valve mechanism in an IC engine comprises a rocker arm ABC that is hinged at B as shown in the figure. The rocker is assumed rigid and it…
- GATE 2022 ME (ME2) Q40 – A spring mass damper system (mass m, stiffness k, and damping coefficient c) excited by a force F(t)=B t, where B, ω and t are the amplitude,…
- GATE 2022 ME (ME1) Q39 – Consider a forced single degree-of-freedom system governed by x(t) + 2 nx(t) + n2x(t) = n2( t), where and n are the damping ratio and undamped natural…
- GATE 2024 ME Q55 – A vibratory system consists of mass m, a vertical spring of stiffness 2k and a horizontal spring of stiffness k. The end A of the horizontal spring is…