The GATE Grind

GATE Machine Design: Gears and belt drives – Previous Year Questions

5 GATE previous year questions on Gears and belt drives (Machine Design, Mechanical Engineering) with answers and explanations, from every paper.

5 questions worth 8 marks in all (2 1-mark, 3 2-mark). Asked between 2017 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2017 ME (ME1) Q29 (1 mark, Multiple choice) – The riveted lap joint shown carries tension F. Rivet diameter is d, plate width is W and maximum permissible tensile stress is S f. Assuming identical…
  2. GATE 2017 ME (ME2) Q45 (2 marks, Multiple choice) – A steel plate fixed to a channel through identical bolts A, B and C carries a 6 kN load as shown. Including direct load and moment, the resultant…
  3. GATE 2020 ME (ME2) Q51 (2 marks, Numerical answer) – A steel spur pinion has module m = 1.25 mm, 20 teeth, pressure angle 20°, speed 1200 rpm, face width F = 50 mm, Lewis factor Y = 0.322 and dynamic…
  4. GATE 2025 ME Q59 (2 marks, Numerical answer) – A pair of spur gears is required to maintain a velocity ratio of 1:2. The module of the gears is 10 mm and the addendum is 10 mm. If the operating…
  5. GATE 2026 ME Q22 (1 mark, Multiple choice) – Worm gearsets are used for transmitting rotary motion between