GATE Fluid Mechanics: One-dimensional compressible flow, nozzles – Previous Year Questions
7 GATE previous year questions on One-dimensional compressible flow, nozzles (Fluid Mechanics, Mechanical Engineering) with answers and explanations, from every paper.
7 questions worth 8 marks in all (6 1-mark, 1 2-mark). Asked between 2021 and 2026, so you can see how the topic has been tested over time.
- GATE 2021 ME (ME2) Q30 – Consider adiabatic flow of air through a duct. At a given point in the duct, velocity of air is 300 m/s, temperature is 330 K and pressure is 180 kPa.…
- GATE 2021 ME (ME2) Q33 – An object is moving with a Mach number of 0.6 in an ideal gas environment, which is at a temperature of 350 K. The gas constant is 320 J/kg.K and…
- GATE 2022 ME (ME2) Q24 – Consider a steady flow through a horizontal divergent channel, as shown in the figure, with supersonic flow at the inlet. The direction of flow is…
- GATE 2022 ME (ME1) Q30 – The figure shows a purely convergent nozzle with a steady, inviscid compressible flow of an ideal gas with constant thermophysical properties…
- GATE 2023 ME Q20 – Consider an isentropic flow of air (ratio of specific heats = 1.4) through a duct as shown in the figure. The variations in the flow across the…
- GATE 2024 ME Q40 – Steady, compressible flow of air takes place through an adiabatic converging-diverging nozzle, as shown in the figure. For a particular value of…
- GATE 2026 ME Q25 – An ideal gas passes isothermally through a long horizontal uniform cross-section pipe under steady flow. Consider that the pressure gradient in the…