GATE Heat Transfer: Modes of heat transfer, one-dimensional conduction, resistance concept – Previous Year Questions
16 GATE previous year questions on Modes of heat transfer, one-dimensional conduction, resistance concept (Heat Transfer, Mechanical Engineering) with answers and explanations, from every paper.
16 questions worth 24 marks in all (8 1-mark, 8 2-mark). Asked between 2016 and 2024, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q25 – Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab consisting of slabs A and B in perfect contact as…
- GATE 2016 ME (ME2) Q25 – A hollow cylinder has length L, inner radius r1, outer radius r2, and thermal conductivity k. The thermal resistance of the cylinder for radial…
- GATE 2016 ME (ME1) Q25 – A plastic sleeve of outer radius r0 = 1 mm covers a wire (radius r = 0.5 mm) carrying electric current. Thermal conductivity of the plastic is 0.15…
- GATE 2018 ME (ME1) Q57 – A slab is 20 cm thick with conductivity 2.5 W/m K. Side Q is maintained at 25°C; side P is exposed to fluid at 45°C with h = 10 W/m² K, as shown.…
- GATE 2019 ME (ME2) Q21 – One-dimensional steady heat conduction occurs through a solid whose area varies linearly in the heat-flow direction. There is no heat generation and…
- GATE 2019 ME (ME1) Q21 – Two slender rods each of length L and diameter d, with L ≫ d, have conductivities k 1,k 2. They are joined end to end into a 2L composite. Neglect…
- GATE 2019 ME (ME1) Q57 – Three slabs are joined as shown without contact resistance. Each is 1 m thick and has conductivity 5 W/(m·K). The centre slab has nonuniform heat…
- GATE 2020 ME (ME2) Q34 – A furnace brick wall has k₁ = 2.5 W/(m·K), inner temperature 1100°C and outer/interface temperature 700°C. Insulation of conductivity k₂ covers it;…
- GATE 2021 ME (ME2) Q55 – Ambient air flows over a heated slab having flat, top surface at y=0. The local temperature (in Kelvin) profile within the thermal boundary layer is…
- GATE 2021 ME (ME1) Q53 – An uninsulated cylindrical wire of radius 1.0 mm produces electric heating at the rate of 5.0 W/m. The temperature of the surface of the wire is 75°C…
- GATE 2022 ME (ME2) Q63 – Consider steady state, one-dimensional heat conduction in an infinite slab of thickness 2L (L = 1 m) as shown in the figure. The conductivity (k) of…
- GATE 2022 ME (ME1) Q45 – Consider a rod of uniform thermal conductivity whose one end (x = 0) is insulated and the other end (x = L) is exposed to flow of air at temperature T…
- GATE 2022 ME (ME1) Q64 – Consider a solid slab (thermal conductivity, k = 10 W m-1K-1) with thickness 0.2 m and of infinite extent in the other two directions as shown in the…
- GATE 2023 ME Q28 – Consider a laterally insulated rod of length L and constant thermal conductivity. Assuming one-dimensional heat conduction in the rod, which of the…
- GATE 2024 ME Q17 – A plane, solid slab of thickness L, shown in the figure, has thermal conductivity k that varies with the spatial coordinate x as k = A + Bx, where A…
- GATE 2024 ME Q48 – Consider a slab of 20 mm thickness. There is a uniform heat generation of q = 100 MW/m3 inside the slab. The left and right faces of the slab are…