GATE Thermal Engineering Applications: Power Engineering: vapour and gas power cycles, regeneration and reheat – Previous Year Questions
18 GATE previous year questions on Power Engineering: vapour and gas power cycles, regeneration and reheat (Thermal Engineering Applications, Mechanical Engineering) with answers and explanations, from every paper.
18 questions worth 30 marks in all (6 1-mark, 12 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q56 – In a 3-stage air compressor, the inlet pressure is 𝑝1, discharge pressure is 𝑝4 and the intermediate pressures are 𝑝2 and 𝑝3 ( 𝑝2 < 𝑝3). The…
- GATE 2016 ME (ME2) Q29 – Consider a simple gas turbine (Brayton) cycle and a gas turbine cycle with perfect regeneration. In both the cycles, the pressure ratio is 6 and the…
- GATE 2016 ME (ME1) Q29 – The INCORRECT statement about regeneration in vapor power cycle is that
- GATE 2016 ME (ME1) Q57 – An ideal Rankine-cycle plant receives superheated steam at 3 MPa, 350°C; condenser pressure is 75 kPa. The thermal efficiency is %. Data at 75 kPa: hf…
- GATE 2017 ME (ME2) Q52 – In a Rankine cycle, turbine inlet and exit enthalpies are 2803 and 1800 kJ/kg; pump inlet and exit enthalpies are 121 and 124 kJ/kg. Specific steam…
- GATE 2019 ME (ME2) Q23 – Which modification of the simple ideal Rankine cycle increases efficiency and reduces turbine-outlet steam moisture?
- GATE 2019 ME (ME1) Q59 – The regenerative steam cycle shown uses one open feedwater heater. Turbine expansion is isentropic; bleed enters the heater from state 2. Process 3–4…
- GATE 2020 ME (ME2) Q64 – Steam at 10 MPa, 500°C expands isentropically until saturated vapour, reheats at constant pressure to 500°C, then expands isentropically to 20 kPa.…
- GATE 2020 ME (ME1) Q34 – An ideal intercooled Brayton-cycle gas-turbine compressor achieves overall pressure ratio 6 in two stages. Intercooling cools first-stage outlet air…
- GATE 2020 ME (ME1) Q63 – An ideal Rankine cycle operates between 30 bar and 0.04 bar. Turbine work output is 903 kJ/kg and pump input is 3 kJ/kg. Find specific steam…
- GATE 2021 ME (ME2) Q57 – Consider the open feed water heater (FWH) shown in the figure given below: Specific enthalpy of steam at location 2 is 2624 kJ/kg, specific enthalpy…
- GATE 2021 ME (ME1) Q21 – In which of the following pairs of cycles, both cycles have at least one isothermal process?
- GATE 2021 ME (ME1) Q55 – Consider a steam power plant operating on an ideal reheat Rankine cycle. The work input to the pump is 20 kJ/kg. The work output from the high…
- GATE 2022 ME (ME1) Q61 – In a steam power plant based on Rankine cycle, steam is initially expanded in a high-pressure turbine. The steam is then reheated in a reheater and…
- GATE 2024 ME Q21 – Which one of the following statements regarding a Rankine cycle is FALSE?
- GATE 2024 ME Q45 – Consider an air-standard Brayton cycle with adiabatic compressor and turbine, and a regenerator, as shown in the figure. Air enters the compressor at…
- GATE 2025 ME Q52 – A thermal power plant is running with no reheat or regeneration. The specific enthalpy and specific entropy of steam at the turbine inlet are 3344 kJ…
- GATE 2026 ME Q44 – For an ideal regenerative Rankine cycle, as shown in the figure below, which one of the following options is the correct representation of…